AutoCad :: How To Merge Two Files Through Xref Option
Apr 30, 2012New to autocad. Would like to know how to merge two files through xref option. I've been trying this option since long but have not been able to do it successfully.
View 3 Replies
ADVERTISEMENT
AutoCAD 2013 :: XREF Layers - Any Way To Merge
Apr 26, 2013When you XREF a drawing from another file that file is brought in along with all of its layers. Personally I do not need these layers for my access is there anyway I can combine all these to eliminate the large quantity of layers in my file? Say by layer merging. And if I do will this affect the ability of the file to revise itself?
Explanation: What I am doing is taking a bunch of engineering drawings, XREF them into my file, then creating seperate viewports for each drawing referenced in. But the key is I need these files to adjust automatically when the engineers make changes (This is done through the XREF command from what I gathered from one of my previous posts).
AutoCad 2D :: Why Detach Is Not An Option For XRef
Jun 12, 2012I cant figure out why detach is not an option for an x-ref I have overlaid on my drg, there are other files attached to the x-ref in question, which I suspect is the issue.
View 2 Replies View RelatedAutoCAD 2010 :: Sheet Set Publish Option -> Merge Control Doesn't Save
Sep 7, 2012I am having an issue with saving the merge control variable to "Lines Merge" under the Sheet Set Publish Options. I have full rights to the sheet set file, and can change the variable to make a plot, but it gets reset everytime I close program and reopen.
View 2 Replies View RelatedPremiere Pro :: Why Is The Audio Option Not Showing On Merge Clips
Sep 26, 2013On Adobe Premiere Pro CC (up to date, running OSX 10.8.5), when I select an audio clip and a .mov clip and attempt to use the audio sync seen in several tutorials, that option is not available. I only see in points, out points, time code and clip marker for syncronize points. Are there only certain file types that can be synced this way or is there a setting I'm missing?
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Unable To Use Print Merge Option?
Apr 22, 2011While using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedAutoCAD Inventor :: Option To Merge Bottom Face Of Pad Eye And Pipe Curved Face
Oct 15, 2012There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
AutoCAD Map 3D :: Merge Two Different SDF Files
Apr 24, 2013I have two SDF fileswith simpley polygon, lets say parcels boundary in the A.sdf, each feature has 10 feature data properties, i.e. taxid, owner, zone, value etc in the B.sdf, each feature has 3 feature data properties i.e. area, layer, colour
I would like to move all the features from B.sdf to A.sdf, however at the least I need to ensure that features moved from B.sdf now has the same number (10)of feature data properties as in A.SDF..Only solution I could come up with is to import A.sdf file into Map3D so that I have a datatable. erase all the features, then B.sdf file and use the attach data to attach the table data to each feature then output to A.sdf using append.
AutoCAD LT :: Xref Pdf Files
Feb 23, 2012When I xref a pdf file into LT2012 all that is visible is the frame for the xref, none of the lines etc.. are visible. The xref manager shows the pdf as attached.
View 4 Replies View RelatedAutoCad :: How To Make Changes In Xref Files
Feb 19, 2011How to make changes in x ref files ??
View 1 Replies View RelatedAutoCad 2D :: Scale XRef Between Two Files
Apr 15, 2012I have a file that is x-reffed into another file. In both instances the drawing has the same measurements, but when I make a viewport in the receiving file the drawing (in the viewport) is 1000x smaller than it should be. It should be noted that I am working in metric units AutoCAD 2011.
View 5 Replies View RelatedAutoCAD LT :: Xref Files Show Up With Crosshairs?
Sep 24, 2012I am working with files from an architect and when I open a file with xrefs they all have these big crosshair/boxes all over them. I can choos edit in [lace and delete the crosshairs but there are a lot of xrefs and it will take for ever. They are not on the original drawings that I can see. One with crosshairs and one without.
View 2 Replies View RelatedAutoCAD Civil 3D :: Xref Files Not Showing Up In All Viewports
Jun 26, 2012I attach an xref to a drawing, plan profile, and align the parts of the xref in each viewport the way I want them to appear.
The host drawing is a generic plan profile sheet border. The viewports are set to the same scale same annotative scale, and are undefined, not a plan or profile viewport. I save the drawing and get out of cad all together. I restart cad and open the drawing. The plan view viewport is visible and the xrefs are also. In the profile viewport nothing is visible or only one line is visible. Items in the view port are viewable, not frozen in the viewport, not turned of. The annotative scale is exactly the same for all viewports as is the xref drawing.I am xrefing a civil 3d 2011 aliment and profile drawing into these sheets. The only way to see the xref in the view ports is to detach and reattach the xref. To make things worse this does not happen to all drawings that are using the border that I used to create this drawing set.
AutoCad :: Converting 1000's Of Files From Microstation J Drawings With Mail Merge Portion
Nov 9, 2011We are a water utility and have thousands of detail drawings of service taps and hydrant connections (maybe 11,000 total). These are in the old Microstation J format. Each drawing is divided into a top half and bottom half. The bottom half of the drawing is the actual drawing portion.
The top half of the drawing is text that comes out of an Old Oracle database, into Microsoft Word 2000 through mail merge then is copied and pasted into the top portion of the card. Newer drawings done like this and opened in AutoCAD have the top portion identified as an OLE object (embedded object), while the older drawings just look like a drawing in the top.
I'm looking to update the system to ArcGIS and AutoCAD. The data will be moved to a Microsoft Access database (probably later SQL Server), and I want to convert all the old Microstation drawings into an AutoCAD format. ArcGIS will provide the basemap and be linked to the database, with clickable hyperlinks to open the AutoCAD drawings. I would like to be able to keep the bottom drawing half while changing the top half of each drawing to reflect updated data in the database. If this can be automatically updated, that would be awesome.
One is the best program to automatically bulk convert the drawings from Microstation J to AutoCAD (I have 2011). Also, I'm looking for a method to display the text from the database in the top portion of the card using either mail merge with AutoCAD or some automatic method of pulling the info out of the database. Can I just copy-paste this info into AutoCAD as we did with Microstation or is there a better way?
AutoCAD Architecture :: Plotting Files With PDF Xref Directly From 2012?
Aug 28, 2012problem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400
Intell Core Duo @ 2.33GHz
2GB RAM
OS: XP pro ver.2002 (w/ SP3)
AutoCAD Architecture 2012
Plotters:
HP Design Jet 1055CM
KIP 3000
AutoCAD 2010 :: Slow Opening Of Drawings (having Xref Files)
Feb 22, 2012When ever i open a dwg file (it contains Xref files) it's take a long time to open... and i tried the same file to open in Autocad 2007, it's opened with in a second.... and also note that the Autocad 2007 installed in a Dual core pc with 4gb RAM.. and the 2012 is installed in Core i7 12gb ram with NVIDIA graphics card.. and it's 64 bit Windows 7 too.. When i try to open a file it's shows "Loading c:/ ....... base.dwg, etc.. ..
View 8 Replies View RelatedAutoCAD .NET :: How To Allow Read Only Xref Files In Edit Reference In Place Mode
Jun 6, 2012I am working on Xrefs in autocad, I come across one scenario as below,
AutoCAD application is not allowing me, when tring to "Edit Reference In Place" mode for read only xref file. and displaying below dialog box.
AutoCAD .NET :: Can Cache Files Manually / Faster Xref When File Cached
Jan 15, 2013I have noticed that a file is xrefed much faster if the file has been opened at some point. (Wtih the file I tested with it was 45 sec vs 1,5 sec) This must mean that the file is cached and can very quickly opened later if it has been opened.
I have an application that xref other files as overlay xref's. This is very slow since the xrefed files haven't been opened. And it will be this slow every time i xref them since they are never opened. Is there a way I can cache the files manually or something like that?
AutoCad :: Use Xref Manager To See Where Actual File For Xref Resides On Computer / Server
Nov 15, 2013I know that in ACAD you can use the xref manager to see where the actual file for the xref resides on your computer/server/etc. What I'm curious about is whether or not the inverse action is possible. Can you somehow access the file (not the output sheet where it's being xref-ed) and see what other files are using it as an xref?
I've come in on a project that is nearing completion and have been assigned the task of "cleaning up the project folder." Unfortunately, there are a ton of files in the different folders that are no longer in use on the final output sheets and I need to keep the ones still in use and archive the ones that are no longer needed. What I've been doing is going through those sheets and reviewing the xref manager for each sheet to see which files are actually put onto those sheets and making a physical checklist from which to organize my findings. Once the checklist is made, I then archive all the files that are no longer being used.
AutoCAD Visual LISP / AutoLISP :: Change Xref Layer With Xref Name?
Jul 31, 2009Is it possible to run a lisp which can extract all the xref names, make a layer with that name and then change the xref on the layer? I have got a similar routine from earlier posts but it doesn't work if any xrefs inserted in paper space (works fine on model space). could change this routine allowing to change the layer of xref in paper space too.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( )
(setq ss (ssget "x" '((0 . "INSERT"))))
[Code].....
AutoCAD Visual LISP / AutoLISP :: Xref Reactor Object ID To Xref Name
Oct 2, 2012I am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
Photoshop :: How To Merge 2 Files Of Same Picture
Mar 26, 2013Is there a way to layer or merge 2 of the same image together? 1 image already retouched but too small, 2nd image is large but not retouched yet. Do I have to start over??
View 9 Replies View RelatedPhotoshop :: Multiple .pdf Files And Merge
Apr 22, 2009I havefour different .pdf files that I'm trying to merge into one file.
View 3 Replies View RelatedLightroom :: Can't Merge Raw Files In Photomatix
Jul 19, 2013Why I can't merge raw files in photomatix if I select them and take them into photomatix from lightroom. I can take raw files from bridge and merge them in photomatix. When I try this in Lightroom where I would rather do everything unless I need PS, it makes duplicate files in tif, psd, or jpg depending on how its preferences are set. Also when I select photos and tell it to merge them using photomatix the only option it allows me to select is edit a copy with lightroom adjustments. The other two are grayed out! Then I'm left with an HDR photo that I wanted but just a bunch of useless added files lightroom had to create to do it.
I can select the same raw files but use bridge and it will take the raw files into photomatix and I don't end up with a bunch of files I don't want. But then I have an HDR image that isn't imported into lightroom. Is there a work around or is this just the way it is?
AutoCad :: Bind Xref But Also Preserve Xref Links?
Sep 17, 2013when you bind an xref the link disappears from the xref manager.
is it possible to bind an xref, but preserve that link in the xref manager? i realize that will lead to two copies of the same object in the drawing (one xref, plus the new block). everyone's okay with that happening.
CorelDRAW Graphics Suite X5 :: Merge 2 Files
Jun 30, 2011I need to merge several Corel Draw files into one Corel file but have no clue how to do this.
View 1 Replies View Related3ds Max Animation :: Merge 3 Files Into One File To Animate
Dec 2, 2011I have created three files that animate ribbons flowing through a space. I need to merge them into one file to animate. The problem that I am having is that when I try to move the object the different ribbons start skewing and going in all crazy directions. Is there a way to move the object and it maintain it's values and not morph around?
View 1 Replies View RelatedPhotoshop :: Merge Files And Remove Non-static Elements
May 23, 2013Where is the feature that allowed images to be merged while removing non-static elements. I saw a demonstration of removing people from a scene when multiple pictures were taken and the people had changed their positions. This was touted as a feature found only in PS extended a few years ago. I have never been able to locate it.
View 2 Replies View RelatedAutoCAD .NET :: How To Get Full Xref Path Name Instead Of Xref DWG
Jul 5, 2012How do I get the full Xref Path name instead of Xref.dwg? I'm scratching my head is this totally under my nose... cause I don't see where the property is stored. I'm getting EV_BDR.dwg instead of C:folderEV_BDR.dwg
View 8 Replies View RelatedCorelDRAW X5 :: Save A Print Merge File With Merge Data Field
Feb 26, 2013Why cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
Photoshop :: Gif Files Option
Feb 3, 2009I reinstalled P7.0 and now I don't have the option to save files in .GIF extension.
View 9 Replies View Related
