AutoCad :: Dimensions Aren't Filled?
Nov 24, 2013I have this problem all of a sudden that my dimensions won't fill anymore? It shows as filled in modelspace but won't fill in paperspace and also when I plot it.
View 4 RepliesI have this problem all of a sudden that my dimensions won't fill anymore? It shows as filled in modelspace but won't fill in paperspace and also when I plot it.
View 4 RepliesI have this north arrow that is not working in a clients drawing. Look at this drawing with the block in it and determine why the arrow head is filled in the block editor but not filled in the drawing (model space)???
View 3 Replies View RelatedI made a change to my Architect 2008 ADT.CUI file to change the mouse button configuration, but the changes aren't taking effect. The old configuration is still working. I found that I have two ADT.CUI files. The one in ...userdatacacheSupport has a 2007 date and the one in the ...enuSupport folder has today's date. Apparently the CUI editor lets me edit one but the other is getting loaded. How do I get the newer version to be the one that gets loaded?
View 5 Replies View RelatedI'm having an issue with my poly lines. they aren't filling in. And its only in one drawings. Even if I do a solid it comes in not tilled in. I tried doing the fillmode but that didnt work. I tried the shademode but that didnt work either. I'm not sure what else to try.
View 5 Replies View RelatedFrom the 10+ layers there are only 3 layers that are printing.How can i print them all? + they are all enabled.
View 9 Replies View RelatedI was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies View RelatedI typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies View Relatedis there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
Also be sure to pick the 'aligned dimension' method and not the 'linear dimension'. I hope that works in Revit as it does in AutoCAD.
View 9 Replies View RelatedI needed to make a dome-like feature and the only way I could get something that looked even close to what I was modeling was to use the loft tool. I've attached the model of what I'm talking about (it's Inventor 2010) The problem is when I try to make a drawing for it, it won't show some of the lines on the dome feature. The only way the loft would work was if I checked the "closed loop" button. I tried checking the box in the drawing saying show tangent faces or something like that and that didn't work either.
View 4 Replies View RelatedI wan't to export a DWG-file with texts to a sqllite database to be used i MapGuide. The export is successfull but I can't get the rotation of texts to work properly - all the texts are horizontally aligned and not rotated. For example, the ROTATION field of a text in the sqllite database has the value 4.8376865658545531 - in the DWG the rotation property is 192.0233g - but when using the ROTATION field as the value for Rotation in the style label it isn't being rotated.
View 9 Replies View RelatedI am using a breakline to establish contours around the foundation of a building. I've done this in the past with no problems. Now I'm getting an Event Viewer, Error message saying that the breakline wasn't added to the surface because it crossed a point or crossed another breakline. In one case there wasn't another breakline in the drawing.
I've used 3d polylines & others to establish the breaklines.
I have recently changed computers, I am apart of a Flexi license system. Now my problem is when i go into Application options and change where to open my templates from it does not save when i quit Inventor. I have also notcied small things like the reverse cusor button i always click but everytime i get out of Inventor it defaults.
(Pictures: One is the custom templates i would like to use. I am selecting them in Application Options/ Templates than applying and closing. Then when i am fnished with Inventor for the day and shut down and the next day when i come back it defaults back to the default templates)
My issue is that all my rounded objects aren´t rendering smooth. And what is up with all these lines?
Am i missing something when i render rounded objects? I already tried the this tip but nothing changed.
The structures I created in my part list aren't available when using the Network Layout Tool. I can select the custom pipes i created, however the structures aren't available in the Structure List pulldown. They show when editing the part list, but not on the layout toolbar.
View 7 Replies View RelatedAnytime I copy and paste anything from one drawing to another (which I do often) it pulls in Layers, Dimstyles, and Blocks that aren't even in the drawing I am copying from?! I don't understand it. I have purged everything from each drawing prior to copying and pasting but after I paste, the items I just purged reappear. It is getting extremely annoying to have to purge CERTAIN items from a drawing that I don't want. I can't even do a purge all because there are blocks that I have in my prototype that I want to keep but don't necessarily use all the time.
I do not get into lisp commands, certain block items, 3d, etc. but am familiar with just about everything but I have ALWAYS had this problem. Just recently I have started to really concern myself with keeping my drawings "clean". I do not want dimension styles in my drawings that are not used and/or are not mine! Same with blocks! I would understand if I was copying block items into my new drawings that it might pull in some thing that are used inside the block that you may not see but this is happening when I pull in SINGLE LINES!!! ON LAYERS THAT ARE ALREADY IN MY DRAWING! It will pull in completely unused layers.
I have recently been using Sheet Set Managers (SSM) more recently and have found them quite handy but I am also finding some peculiarities with it too. I have no issues setting up a SSM and getting it to plot all my sheets either to our plotter or to PDF at full size (24x36), however when it comes to setting up a half size (11x17) page setup and overriding to it, is where problems occur.
What I want is a page setup that I can select that will plot 11x17 from 24x36. So, I first created a page setup that does this in our template (.dwt) and then set the page setup overrides file to our template file (under sheet set properties). Next I right-cliked on my sheet set and went to "Publish" and then "Publishing Using Page Setup Override", but the list it populated for me did not reflect all of the page setups we have in our template??? It listed two page steups _24x36 and _30x42 (see attachment). These page setups can be found in our template under page setup manager along with several others which don't show in the overrides (see attachment).
Is there a reason the other page setups aren't coming up in the SSM overrides menu?
I want to color fill between contour lines. Most of the plug-ins I have tried only color the actual contour lines. Some of the large stand-alone packages say that they do it, however most are beyond my maker financial reach.
So my queries are: can this be done within any AutoCAD package? Are there any known plug-ins that can do this?
Or will I have to commission a customized plug-in. The image below is an example of the color fill required.
DH Colored Cont Image of 001.jpg
How I can get the holes filled/hatched in elveation vies and in sections?
Please see the attaced sketch.
I use AutoCAD Mechanical 2012. The attached cad files are shown. One is filled on arrow and pline. The other is not filled on arrow and pline.
These file used same system variables. How can do this? I would like know for system variables that possible can do.
I am curious what would cause my viewport to print as if it is filled with solid hatch? I haven't changed any settings for the viewport and even recreated it from scratch. In my print preview it shows it will print as it looks on the screen, however when it actually prints, it's filled in solid.
View 9 Replies View RelatedTrying to print out a large arc on paper using fill to thicken it but as the attached picture shows, the filled part turns out blocky, leaving noticeable gaps. Basically, it's not smooth and needs to be more rounded. Is there anyway to fix this?
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
I was working away and just before I was getting readly to print when I found that my arrows where not filled.
I check the arrowheads and it is set to "closed filled. And the text is ok.
I have had this happen before but the text was the same way. how can I fix this?
I am semi-new to AutoCAD but have a fairly good knowledge of how to work the program now. However, I am continuously having problems with the presspull command. When I try to use the command on an object, the object is raised but not filled. It looks sort of like a fence/outline around the border of the object with a grid pattern.
View 9 Replies View RelatedThe thing is that my dimension text is colored white and outlined with the cyan( the color I want to use it for).
I have attached an image so that you can see. How to remove this white and have some other color instead of that.
Shooting with a Canon 5dMarkii. Windows 7; Photoshop CS3. When I try to open RAW (CR2) files, I get a message that the file type can't be recognized. I've not had this problem before. My "updates" says that everything is current.
View 3 Replies View RelatedI want to put a particular hex code in an object. When I paste the hex code in the color picker of my object it changes to the color I want. After I choose another object and then go back to the particular object with my hex code its a different hex code but the colors look similar.
View 2 Replies View RelatedI have a red circle on one layer. That layer is selected in the Layers window. When I choose Filter | Brush Strokes | Spatter, the circle doesn't change (i.e., no spattering).
I'm using CS5 on Windows, the image is RGB/8, all of the filters are enabled, the colors are set to foreground black and background white, I've tried dragging the radius and smoothness sliders, I've pressed Ctrl (which changes the Cancel button to Default) and clicked Default.
If I move through the other filters, most of them don't seem to do anything. These Artistic filters do work: Colored Pencil, Neon Glow, Sponge; none of the Brush Strokes appear to work.
I Have A Legit Registered Copy Of Cs2 And For Some Reason Not All My Filters Are Working. Artistic, Brush Stroke, Sketch, Texture, And Video Aren't Working.
View 1 Replies View RelatedIf I use shortcuts ( controle + N / controle + V etc. ) it doesn't work. How can that? And better, how can I make it work??
View 1 Replies View Related