I am wondering whether we can increase the width of a 2D sketch (e.g., from 3.0436 to 4.3175: 1.42 times); in the meantime, decrease its height (e.g., from 7.6091 to 6.625: 0.87 times) by the SCALE command.
I've tried it several times in different ways, but both width and height were gonna increase or decrease at the same time!
how to increase width on command panel by column?
here you can see an image of what im talking about:
[URL]
and here is a example from a video where shows that it is possible to do it:
[URL]
I have a picture in png format which contains some waveforms. I want to increase the thickness of the waveforms.
One way could be to draw thicker lines on the waveforms in Window's paintbrush but that is very time consuming and cumbersome process.
Can it be done using GIMP? I am attaching the part of the picture which has two waveforms. For the sake of illustration, the thickness can be made double of the existing one.
Attached File(s) waveform.png (7.52K)
How do I increase the size of the text of dimensions in sketch mode.
View 4 Replies View RelatedI have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
I have a vertical image 3000 x 2400 and I need it 9000 x 3000. How do I increase without distortion?
View 4 Replies View RelatedI have a polyline that has been inserted into a block. I want to scale the block so that the start and end points of the polyline can change but the width of the polyline remains constant.
View 2 Replies View RelatedWhy is my command-bar limited to just 80 characters, when by the looks of it, it could easily fit 200 characters in before having to use a second line of text?
I often want to copy the filepath of the current .dwg and paste it into explorer, but it only pastes the first line of text!
See attached .jpg or text below
Your current drawing filepath is M:196493-CADOPV 3-Entwurf 5
PVModelLAG_AUS_1989_0000_LAGEP_BAUP_XXXXXXXX_MS001_20130321-Synthesis-Plan-Of- pipelines_AB.dwg. command:)
A colleague has asked me over the phone about a command line problem he was with 2013 LT in Classic Mode.His command line is reduced to about 20% of the full screen width. He has sent me a print screen and everything else looks ok. It is correctly parked in the space below the drawing area and above the status bar. It's left hand edge is correctly positioned but it is greatly reduced in width. The area to the right is the standard grey sort of colour as all the other blank areas.He tells me he can't drag the rh edge across the screen.We have tried dragging the whole command line onto the screen and then returning it to the parked position but to no effect.It was ok earlier in the day but obviously he has done something to break it.
View 3 Replies View Related[URL] ......
Floating command line width gets shorter and shorter everytime you open up AutoCAD? Civil 3D is real bad, I used it to shoot the above video. In regular AutoCAD, it still shrinks, but it shrinks a lot less.
Any tips for keeping it floating but making the width stay constant?
I am trying to create a sketch symbol with info about the first view on a sheet. It seems to work fine with any of the properties built in, but I am trying to include the scale. There are lots of posts about putting scale in a title block, but I can't seem to get the same code to work for a sketch symbol.
View 5 Replies View RelatedI am having a problem with a sketch not updating the parameters when using a "while / end while" command.
Basically if you have a right angled triangle (as attached) with one side and the angle doing the driving then I wish to update the sketch until the last side which is a reference dimension reaches a preset dimension.
I cannot get the updated sketch to read back into the while command to stop when the limit is reached. Instead it goes on an infinite loop until the sketch breaks.
I have used every update under the sun and can get nothing to work.
Trigonometry not an option as this is a basic example of what I wish to achive.
I have seen an example of this working but only for reading the iproperties so dimensions can change until a volume is reached.
I need to disable the "Set sketch scale by the first dimension" feature.
The feature is nice under normal circumstances, but in my case i need to insert a dxf sketch and then draw around it in inventor. When i start to dimensioning the sketch then it scales the inserted part.
That aint so good.
I am attempting to insert an image into a sketch to be used as a decal, but it appears as a blank gray box. I created this image in Photoshop CS5 on my Mac Mountain Lion partition. I am running Inventor 2012 on my Windows 7 64-bit partition.
I appear to only have a problem with that specific image. All other images on my harddrive insert correctly. I have tried multiple file types (.jpg, .png, .gif, etc), but nothing has worked. URL.....It may be necessary to note that the image is white text with a transparent background.
Where are the Scale Line Width options Icons located?
View 2 Replies View RelatedMy Stage is set to 100% w/h. I'd like to center a div, and have it scale based on a percentage of the Stage's size. The div contains animated text and images.
I've seen some similar examples but the Stage always seems to be set to pixels.
When I use the "SCALE", sometimes it scales according to the size I want as in, I can drag it and control the size I want. But sometimes when I select a whole bunch of stuff, the objects just blows up even when I moved 0.5 cm of my mouse...
View 9 Replies View RelatedI'm trying to create an alignment for a road I'm drafting but the alignment seems to be scaled differently and I can't find any scale command for alignments. I know that the dimensions of the model space are correct but the alignment dimensions are scaled down by a factor of 12 (I'm assuming it converted my feet to inches).
Ex: say my road is 100 Ft long and when I measure it in Model (using the AREA--> OBJECT command on my centerline of the road) it measures to 100 Ft but when I create an alignment for it the alignment tells me the road is only 8.33 Ft.
whats the difference between creating a width using layers and using polyline width?
View 2 Replies View RelatedI'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
View 2 Replies View RelatedResizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I'm designing some photo frames and as they come in loads of different sizes, I'd like to be able to make the frame design bigger, in illustrator, but keep the width of the actual border. i.e. at the moment it's for a 10cm x 15cm photo with a 3cm wide border going all the way round - I want to keep it 3cm for larger photos.
and here's a link to the .ai file: [URL] I have loads of other frame designs which will need similar treatment so I'm looking for a general solution rather than something that is totally specific for this design.
Trying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedI'm having an issue where I'm creating a white border around two landscape oriented images that are the same exact size then doubling the width of the canvas. I've never had this issue before with PS CS6.. I tried resetting the photography workspace but no luck. I tried with two portrait oriented images and the same result. I've restarted my machine. I'm on Windows 7 Pro 64bit and I'm running PS CS6 64bit as well. Thought to do a repair through Programs and Features but there is only the option to uninstall. I haven't done anything out of the ordinary except use an action a few days ago I downloaded and used from
[URL]........
and I downloaded and used the press print action.
How I can correct this? If an image is 20 inches wide and I'm doubling it to 40 it's tripling the width to 60 inches. Is there a way I can reset every aspect of PS CS6 to get back to a factory state other than uninstalling and reinstalling?
I drew a cured line with the brush tool in illustrator CS5, but when I select the new "width tool" to change the width, it doesn't work.
Here are my steps:
1. Select the paintbrush tool
2. Draw something
3. Select the "width tool"
4. Try to change the width but it won't work.
Since I draw with the paintbrush tool, the "width tool" can be very handy if I can get it to work.
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.