AutoCad :: Range On Excel Sheet Imported To DWG As Reroutable Xref For Template DWF?
Dec 1, 2011
Any way I can import data from an excel file in a predetermined range but variable workbook and sheet. For instance, in Station5.dwg I access cells B4:C15 on sheet STA-5 on workbook TerminalA.xls and then in Station6.dwg I access cells B4:C15 on sheet STA-6 on workbook TerminalA.xls, but all through just rerouting the sheet just as if I were to reroute an xref with the same scale and insertion point.
I'm trying to avoid a continual copy/paste of OLEs for each .dwg because I will have an average of 5 ranges to import from each sheet, of an average of 7 sheets per workbook, of an estimated 220 workbooks to work through. (7,700 ranges estimated so far is a lot of work).
View 0 Replies
ADVERTISEMENT
Jul 18, 2012
I'm trying to link an Excel sheet to a new assembly but it is only listing half of the sheet parameters. I have done this before with no issues. I've also imported another sheet and it works fine. I copied and renamed a sheet I know that works deleting the data from it and coping the data I want and I get the same results. This lead me to believe there is something wrong with the sheet. See attached file.
Excel 2010
Windows 7
Inventor 2012 64 bit
View 3 Replies
View Related
Sep 7, 2012
How do you embed (not link) an excel spread sheet into my sheet metal template.
The excel file is simple, 2 rows listing the A1=gauge and B1= decimal equivalent.
What I want to do with this is to get the gauge to show up in the iProperties description along with length and width of part. The thing is I need column A to show up in the iProperties (12GA) but column B to be used for the sheet metal default thickness.
I keep getting this error when I run my code.
Error in rule: Gauge, in document: Part1
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
Code so far..
i = GoExcel.FindRow("3rd Party:Embedding 1", "Sheet1", "Gauge", "<=", iProperties.Value("Custom", "Gauge"))MultiValue.List("Thickness") = GoExcel.CellValues("3rd Party:Embedding 1", "Sheet1", "B2", "B35")
View 9 Replies
View Related
Sep 13, 2013
I simply want to paste a series of cells from excel into an existing autocad table. About 8 rows, 1 column thick. I want the values to acquire the destination formatting too if possible. I do not want to create an OLE object or anything fancy. I have seen instructions to use "Paste Special" on forums, but I do not have this choice when I right-click. I'm sure this is possible.
View 8 Replies
View Related
Oct 24, 2013
I am trying to insert an excel table using a datalink. If I insert the entire sheet, it includes too many cells. If I set a print area and choose that area, it will not insert the table. The first time it acts like it is going to work, but then never lets me place the table. The second attempt it just will not let me select that data link. If I actually name a group of cells, I get the same behavior as the print area. Have issues with importing excel tables? Am I missing a step?
My work flow is
Create an excel sheet & format the table.
Select desired sells, set print area.
Save & Close excel
go to annotate tab in civil 3d
select table icon
choose from data link
launch data link manager
create data link and choose range of cells as print area.
Press OK
it never let me choose insert point.
I have also tried to simply make the datalink and then run the table command with the same results.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 5 Replies
View Related
Feb 10, 2013
I'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
View 7 Replies
View Related
Nov 20, 2013
I have a Multi-Value Parameter "MV" that I want to populate using a Named Range from an Excel file that is already populating other parameters for the same file.
I currently have the file working by populating "MV" by using the snippet from iLogic below...
MultiValue.List("MV") = GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10")
The reason I don't like this method is because if ever that range changes... all the iLogic code will have to be updated as well. How to set a Multi-Value Parameter using a Named Range from an Excel file? I assumed the below snippet would work but I am receiving
"Array was not a one-dimensional array." as an error.
MultiValue.List("MV")=GoExcel.NamedRangeValue("Named_Range_Value")
View 4 Replies
View Related
Jan 9, 2013
I have a MultiValue Parameter that I want to populate using a named range from an embedded excel spreadsheet. I would like an iLogic solution if possible because I need other people to be able to understand the code without too much difficulty.
One of the sample snippets given allows access but not if the excel file is embedded.
'GoExcel.NamedRangeValue("Part_Width")
The code below works but not when using a named range.
' Load bearing housing typesMultiValue.List("parameter1") = GoExcel.CellValues("A1","A20")
Is there something I'm missing? I was hoping to use something like below
' Populate MultiValue Parameter from excelMultiValue.List("parameter1") = GoExcel.CellValues("3rd Party:Embedding 4", "Sheet", "myNamedRange")
View 2 Replies
View Related
Aug 2, 2013
How do I specify which template my imported components use?
View 7 Replies
View Related
Apr 3, 2012
I have a table imported into autocad from excel, however despite the table (excel) being formatted, border lines appropriately placed and hidden througout the sheet, all off the border lines of the cells appear when imported into autocad.
is there anything i can do to hide back some border lines for selected cells?
View 5 Replies
View Related
Jul 14, 2009
Importing excel files into AutoCAD drawings works nicely but the print is unreadable in some areas of the page. There seems to be no rhyme nor reason to how the plot will turn out.
View 9 Replies
View Related
Sep 29, 2011
I'm trying to import Excel charts (from Excel Office Home and Student 2010) into Autocad LT 2009. I've been doing this for years without a problem using Excel 2003 but now that I've upgraded to Excel 2010, I loose a lot of formatting (line weights are different, fonts are jumbled). how I can import with Excel 2010? BTW, I tried the trial of Autocad LT 2012 and still had the problem.
View 3 Replies
View Related
Aug 22, 2012
i am having a BOM template for the parametric modelling i have created using the excel sheet input link.
when i create the drawing from the model the default Bom part list is coming, instead of that i need to get the Excel Bom Template i have created based on the input excel link.
How to get the Excel Bom Template in the drawing.
View 1 Replies
View Related
Jun 27, 2013
I am trying to create a 3d surface by importing points from an excel file. I have been using "import points" in the 3d sketch mode, and checked off the box that says "create 3d spline." But this just causes Inventor to freeze and crash. My excel file had about 2000 points, all of which lie on the surface I want to create in Inventor.
Should this method work in theory, and do I just have too many points?
View 2 Replies
View Related
Jan 26, 2012
I copied and pasted special part of an excel document into AutoCAD Map 3D. But I had deleted it instead of detaching it. How do I remove it? Its says I cannot reload, detach or bind. I have 6 of those. I have 2 more that are Not Found and states the same thing. I just want them gone. How do I do it?
View 6 Replies
View Related
May 23, 2013
I am currently working on quite a large scale project with drawing packages of up to 50 drawings. Each of these drawings are layouts and need to have the same set of xrefs (ie. survey and road design) with the same layer properties. I may have one set of 50 drawings for Road Lghting and another for drainage for example. Each requiring a different set of xrefs and different set of layer properties.
Where I currently work I have a choice between to systems to run the job, both involve the use of scripts to control the layer states. My question is, and i wanted to start a discussion on which option is better, is whether to use Xref templates which nest all the individual xrefs into each of the 50 drawings, or use another script to attach/change the list of xrefs in each of the 50 drawings.
Xref Master/template option..Nest all required xrefs in one master, ie. X_DRAINAGE_MASTER.DWG Use a script to control layer states, ie. DRAINAGE_ LAYERS.SCR I think this has greater control over random mistakes with draw order issues from other draftsmen.Attache individual xrefs option. Individual xrefs in each drawing with a script ready which loads/changes the xrefs as I need. This script also controls draw order Also uses the same DRAINAGE_ LAYERS.SCR to control layer states I think this has a higher likelihood of draftsmen making mistakes with random xrefs and/or draw order problems. Probably takes more time to update all drawings with a respective change as opposed to updating one master xref.Does nesting a whole load (maybe 50-100 xrefs) into a master create slow working drawings?
Worth noting I have the ability to apply any number of script in any order I want through the use of a spreadsheet.
View 3 Replies
View Related
Apr 30, 2012
i want to export my part list with ilogic in a excel template but dont want all the part list column and dont erase the column i skip in excel?
View 3 Replies
View Related
Feb 14, 2012
I am trying, to make a data extraction with Link External data with linking to a excel sheet. Everything works fine, with the data extraction.
Then I try using upload to source/download to source update, but end up with this msg. every time:
1 object(s) found.
1 data link(s) do not allow their data to be written out.
0 data link(s) written out successfully.
I have tried when it said, successful all the way, but nothing have happen in the excel sheet at that time.
What I am trying to do, is make it automatic or manual update in the attributes in the drawing. If I change something in my excel sheet and ofc. the other way around to if possible.
View 9 Replies
View Related
Oct 19, 2012
I've to put some data as like table beside the figure. I've these data in a excel sheet. Can i import that sheet in CAD? or I need use table and re-type all data?
View 4 Replies
View Related
Sep 17, 2012
Currently i am trying to get an Excel sheet incorporated into my AutoCAD layout. I get it in and it seems way to small. I re-scale the excel insert and get it right then update the sheet to get the new info and it shrinks back down. Now i thought at first it was the excel insert that was the problem, but now looking my layout seems to be extremely large and that's why the excel sheet is off. How can i take my existing layout and change it to fit 11x17. I really don't want to have to redraw the whole layout to make it fit 11x17.
View 9 Replies
View Related
Feb 21, 2012
i attached a lsp with and excel
the lsp does creat circles with diameter of 5 related to imported points from excel
i realsed that it is able to get the first column but can get the coordinate from the second one
(setq posX (atof (substr line 1 nPos))) (this is ok)
(setq posY (atof (substr line (1+ nPos)))) (not this one)
View 2 Replies
View Related
Apr 11, 2012
I created a template file for the sheet material with the specified type of material, sheet thickness and the radius of bending. Placed in the Templates folder. Call the template from the menu, HED, and all settings are reset to Default? How to make a new file so that all settings are saved?
View 3 Replies
View Related
Jul 2, 2012
What I am trying to do is create a custom sheetset template that will have ALL my sheets embedded, that way all my notes, details and sheets will always be ready. I would just need to update some text and details from time to time.
These are the steps that I have taken
Created a new sheetset and called it Sheetset Template
In this sheetset template, I created all my sheets and inserted notes/details.
At this point I thought all I would need to do is copy the sheetset file and all by sheets would get copied too, but that was not the case, just the sheetset file was copied and I have to create all the sheets again.
View 2 Replies
View Related
Jan 26, 2013
What is the best way to Insert an Excel sheet into autocad?
View 4 Replies
View Related
Apr 18, 2012
I've made a big calculation in a Pipe Stress Analysis program and the program has auto created 10 autocad drawings that is used to find points in the system.The problem is that the program has random numbered (with no intelligence) and now I have a big report which for example points at a number some where in the 10 drawings, which is hopeless to find.
Can I somehow:
1. Find all numbers in this drawing.
2. Put them into Excel.
3. Sort them after size.
4. Add an extra column which tells which drawing I can find the number.
5. Last put all the numbers from all the drawing into one Excel sheet and sort them after size, now I have a number index, so I can find which number is in which drawing.
Can Autocad find all numbers in a drawing and let me copy them to Excel for editing?
View 4 Replies
View Related
Oct 28, 2010
I want to link an excel sheet with a drawing, so changing the excel changes the drawing.
I used this awesome site to learn about going to Edit->Paste Special->Paste Link->AutoCAD Entities...but I don't have that choice. Just the one that makes the OLE image. While that will work, that is less than ideal. It appears in just normal paste, but not under paste link.
AutoCAD 2007, A.54; Excel 2003 SP3; Windows XP SP3.
View 9 Replies
View Related
Feb 8, 2013
I have a drawing with an embedded Excel sheet. I want to read the contents of the excel sheet. Maybe in combination with Microsoft.Office.Interop.Excel?
View 9 Replies
View Related
May 27, 2011
I am extracting attributes from an AutoCAD 2011 drawing into an Excel sheet using EATTEXT. I am then manually adding columns to the Excel sheet. How can I update the Excel sheet with new attributes values later on without overwriting the modified sheet and losing the added columns?
View 2 Replies
View Related
Apr 13, 2013
I was wondering if a template used to create frames using the create frame tool in autocad civil 3D should have the same datum, projection as the files that are being referenced? Or is the template independent from from the reference files and does not need any datum, projection setting applied to it?
View 4 Replies
View Related
Apr 23, 2012
I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies
View Related
Jul 15, 2013
I want to set up a sheet set manager template which uses a specific client titleblock, which due to the work I do is quite frequent.
I would like to insert as many fields into the title block that refer to custom properties in the Sheet Set. In particual some common fields point to the actaul Sheet Set custom properties (eg Client Name), and some point to the actual sheets custom properites (eg Title). I have set up a sheet set with a range of custom properties attached to both the Sheet Set and the Sheet.
However, I cant figure out how to set up the titleblock template to read in this information for each new sheet I create.
I open my template file, insert fields as required and try to point the fields to the sheet sets file. However I cant point to the custom properties for a sheet unless there is a sheet open. When I do this, all new sheets are created with the fields using the original sheet values - I wanted to update these based on custom properties I set for each sheet.
View 9 Replies
View Related
