AutoCAD Visual LISP / AutoLISP :: Create Circles With Diameter Of 5 Related To Imported Points From Excel
Feb 21, 2012
i attached a lsp with and excel
the lsp does creat circles with diameter of 5 related to imported points from excel
i realsed that it is able to get the first column but can get the coordinate from the second one
(setq posX (atof (substr line 1 nPos))) (this is ok)
(setq posY (atof (substr line (1+ nPos)))) (not this one)
View 2 Replies
ADVERTISEMENT
Feb 2, 2012
I need to place a circle, of a user-defined radius, as a marker at the endpoints of all lines in a drawing. how to accomplish this using lisp? It doesn't matter if they overlap; I can use OVERKILL to delete those objects.
I started the code with:
(defun c:cmark ()
(setq crad (getdist "
Specify radius: "))
)
But don't know how to cycle through the objects, determine the end points of lines only.
View 6 Replies
View Related
Apr 9, 2012
I am not sure why this is not working.
(setq SelectionSet (ssget "C" Point1 Point2 '((-4 . "<or") (0 . "CIRCLE") (0 . "MTEXT") (-4 . "<or"))))
I want to select circles and mtext within the specified points.
View 2 Replies
View Related
Oct 21, 2013
Can a AutoLISP command be written to read an attribute in a block and draw a circle with the attribute as the diameter using variables? The appilcation is taking the diameter of a tree trunk (the attribute), multipling by 12, and drawing the canopy circle on hundreds of those blocks. So the circles drawn will vary in size.
Not sure how this could be set up, i'm not familiar with LISP writing at all.
1) Read block, single, mulitple or definition?
2) Read Attribute
3) Varaible of attribute, (attribute is an inch measurement...it needs to be multipled by 12 to get feet for final use as circle diameter drawn)
4) Draw circle, variable, with diameter coming from attribute variable (attribute in inches that is multipled by 12)
5) Center point or circle to be block's base point
View 9 Replies
View Related
Jan 24, 2013
Am trying to put up a lisp routine to plot a couple a circles along the circumference of the cylinder(when its is develpoed flat). But the routine fails:
(defun c:cir ()
(setq rad (getreal "
Diameter of the holes: "))
(setq dia (getreal "
Cylinder diameter: "))
[Code] ........
View 1 Replies
View Related
Aug 17, 2011
I wasn't able to find out any information on what format the parameters are required to look like when passed along with the Method ExportAsFixedFormat.
I'm currently using the following code to change the active printer followed by the printout command
(vlax-put-property XL "ActivePrinter" "DocuCom PDF Driver on Ne03:")(vlax-invoke-method XLS "Printout")
where XL is my spreadsheet and XLS is the active worksheet. This works but the printer controls filename and location.
(vlax-invoke-method XLS "ExportAsFixedFormat"
I've found the ExportAsFixedFormat but can not find any documentation that shows how to format the parameters within LISP to send to Excel.
The object browser for VBA in Excel shows the following:
Sub ExportAsFixedFormat(Type As XlFixedFormatType, [Filename], [Quality], [IncludeDocProperties], [IgnorePrintAreas], [From], [To], [OpenAfterPublish], [FixedFormatExtClassPtr]) Member of Excel.Chart
I recording a macro and got the following that shows some additional information.
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:= _"C: est.pdf" _, Quality:=xlQualityStandard, IncludeDocProperties:=True, IgnorePrintAreas _:=False, OpenAfterPublish:=True
Is there any documention showing what this looks like when using the vlax-invoke-method?
View 3 Replies
View Related
Mar 19, 2013
I need to draw a table with point number, easting, northing, elevation for a lot of points and need a lisp to read the xl spreadsheet and draw the table.
View 9 Replies
View Related
Sep 4, 2012
I have Export data from dwg to notepad lisp programe. But i need lisp programe for Export data (Easting,Northing and Level) from dwg to excel.
View 2 Replies
View Related
Aug 13, 2013
I'm trying to get an excel sheet to open and count cells based on the text inside a selected column then compare it to cad. The column says "red" or "green" and I want to compare it to a count of red and green hatches in cad.
I managed to get them to be counted in cad but I'm not sure how to get the excel part to work.
Note: I posted an earlier post thinking to count the actually color in the excel cells rather than the words but that ended up being quite complicated.
View 9 Replies
View Related
Sep 5, 2012
I have some coordinate in the excel file. How to import from excel to dwg. All coordinate i will make polyline. I know one method all coordinate copy and paste to command prompt. But i need script file or other method.
View 3 Replies
View Related
Dec 16, 2011
This probably isn't the correct discussion group but not sure where else to post this.
My sales department wants to be able to create drawings based on entries in selected in their Excel qouting tool. Basically, they want to configure a product in the field, and be able to show the customer the drawing with TrueView. (They don't have AutoCAD installed).
I would think the best I can do, is manipulate a .dxf file based on their selections but that may get very complicated.
View 2 Replies
View Related
Jun 14, 2009
how create lisp convert text (from drawing) to excel
View 6 Replies
View Related
Aug 26, 2013
Lisp routine that can write to an already existing XLS file? What i need is an Excel file that will be updated with a users 'hostname' when they start AutoCAD. I can get the hostname information with the below code, but I'm not sure how to get this value into an Excel file.
(getenv "computername")
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
View 2 Replies
View Related
Nov 10, 2012
i want to call an excel macro from a lisp. is it possible?
now i have this:
(startapp "C:\Program Files (x86)\Microsoft Office\Office12\Excel.exe"
(strcat """
(getvar 'dwgprefix)
(vl-filename-base (getvar 'dwgname))
"XXX.xls""
)
)
i just want it to run macro1 from book1.xls
View 2 Replies
View Related
Sep 4, 2012
I have Export data from dwg to notepad lisp programe. But i need lisp programe for Export data (Easting,Northing and Level) from dwg to excel.
View 2 Replies
View Related
Jun 25, 2012
I would like to get the cell with a specific name in Excel.
In Excel you can give a cell a custom name like "Project_Name".
How do I get the sheet and cell(row,column) of the cell with this custom name ?
View 6 Replies
View Related
Jan 24, 2012
I am trying to export what looks like a table of text to Excel. The problem I have is the table is not an actual TABLE within AutoCAD but rather just columns of text with lines drawn around it. How I can grab this text and then put it into an Excel Spreadsheet.
View 5 Replies
View Related
Jan 5, 2012
I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies
View Related
Apr 25, 2013
I would like to link an AutoCAD table to an Excel file with the first method described in this page:
[URL]
I know the filename of the Excel spreadsheet and the range as well.
Is there a way to make a script that links the table and then detach the link after that ?
View 4 Replies
View Related
Jun 12, 2013
We have a custom LISP program (Written, upadated in 2003) that takes a keyed in item number, opens and searches a .txt file with four coulmns, for the keyed in item number (column 1) and returns a part number (column 2), description (column 3) and any information in column 4.
Here is the Part of the cod in question:
(setq recx (open "H:/ACAD2012/alcocustm/LISP/hardware.txt" "r"))
(setq d "?")
(setq rec (read-line recx))
[Code]....
A quetsion was asked if the data in the .txt file could be put in an Excel file. I tried looking at other post, but I can't seem to find a clear cut way to open and extract the data. Or this old dog overlooked a boand. Is there a easy way to do this, similar to the above?
View 8 Replies
View Related
Sep 6, 2012
I am trying to import a list of customers from column A in an Excel file into a list for a popup_list for my Drawing Properties DCL. I am having trouble finding information on how to do this.
Basically: Load the file, (workbook through active sheet: vlax-get-property)
(setq xlSheets (vlax-get-property xlBook 'WorkSheets) )
Then, how do I get it to put column A properly into a list for the DCL?
View 1 Replies
View Related
Aug 16, 2012
I'm dimensioning an old drawing with the real (measured) dimensions and with the drawing dimensions in brackets (using ' 1500 (<>)' to give '1500 (1505)' for example.
What I'd like is to also be able to put on the difference between the length I type in and the length in brackets - as this would let me see any really glaring errors that can't be attributed to user-error on the laser measure.So I could type in '1500 (<>) (X)' where X is the formula, and get ' 1500 (1505) (5)' back?
How to be able to run a script that could highlight any dimensions where the number is brackets and the typed number have a a difference of, say, 50.Or failing that, any way to extract all the dimension text at the end into excel so I can see the differences myself?
View 1 Replies
View Related
Jun 14, 2013
I am looking for an example excel macro to zoom to an object given the obect entities handle.
View 2 Replies
View Related
Oct 7, 2011
I would like to be able to retreive data from a sepcified cell, in a specified worksheet, from an excel file.
I don't have any clue how to connect to an excel file and read the data. Most seems to think you already had an understanding but I'm starting from the beginning.
View 5 Replies
View Related
Dec 19, 2011
What I have is a topo plan in 3D (All contour lines have x, y and z values). My pipeline is on x and y coordinate only. I need to get the corresponding z value for say about 2000 points on the pipeline.
View 9 Replies
View Related
Nov 6, 2013
I need very very often to know the angle between two surfaces to write cnc programms...At the moment i draw allways two lines normal to the line between the two surfaces an use then the angle measuring tool.Works good, faster then bks and dimensioning, but need also time and always need to delete the lines after...
Is it possible to get a lisp which ask für 1 point on the first surface, 1 point on the other surface and two points on the line between the 2 surfaces? So the lisp know 3 points of each surface and can give out the angle between... Should be allways between 0-180°
So it needs only 4 klicks to get a angle! That would be so great! Is there a lisp programmer who can make this possible?
View 9 Replies
View Related
Aug 19, 2013
how to use AutoLISP to draw lines between two points. I have x,y,z coordinates for the end points in an excel sheet which I can save as a text file. I need to pull the coordinates from the file and use them to draw the lines. There are 2000+ lines so it is not feasible to draw them manually.
View 8 Replies
View Related
Nov 1, 2011
Looking to make a selection set of points that are on a specific layer, and then create a dimension between, in this case, two points. I feel like it should be very simple, but I can't get it to work for the life of me. Here is the test code I've been playing around with:
(defun c:test (/ sel1 TC)
(setq sel1 (ssget "X" '((8 . "VPOINTS"))))
(setq TC (polar (entget (assoc 10 (ssname sel1 0))) (dtr 180.0) 9))
(command "DIMLINEAR" (entget (assoc 10 (ssname sel1 0))) (entget (assoc 10 (ssname sel1 1))) "V" (polar TC (dtr 180.0) 9) "")
[code].......
View 1 Replies
View Related
Jul 7, 2013
I have plines of circuits that sometimes have T's (line goes along, then T's out then back to T point and then continues).
Here is example line -
(setq List_Pline (list (list 0 0) (list 1 1) (list 0.5 1.5) (list 1 1) (list 2 2) (list 3 3) (list 3.5 2.5) (list 3 3) (list 4 4)))
nth 0 = (0 0)
nth 1 = (1 1) - T point
nth 2 = (0.5 1.5)
nth 3 = (1 1) - T return point
nth 4 = (2 2)
nth 5 = (3 3) - T point
nth 6 = (3.5 2.5)
nth 7 = (3 3) - T return point
nth 8 = (4 4)
I need to be able to pick 2 points along the line and find the shortest route.
Examples -
1st point at 1,1 and 2nd point at 3,3 - new line is nth's 3,4,5
1st point at 0,0 and 2nd point at 1,1 - new line is nth's 0,1
1st point at 2,2 and 2nd point at 3,3 - new line is nth's 4,5
1st point at 3,3 and 2nd point at 4,4 - new line is nth's 7,8
1st point at 0,0 and 2nd point at 3,3 - new line is nth's 0,1,2,3,4,5
1st point is 1,1 and 2nd point is 1,1 - new line is nth's 1,2,3
I've tried using vlax-curve-getParamAtPoint, but it returns 1st T point.
Synopsis of program -
Select Pline
Pick 1st point
check if on line
Pick 2nd point
check if on line
check if 2nd point is before 1st point, if so swap locations
find last nth of 1st point
find 1st nth of 2nd point
return list
View 6 Replies
View Related
Aug 23, 2013
I am trying to get the end points of an invisible line it would be the line that you offset I know all about polar I just don't know which angle to add or subtract and I will pick the point on the side I want it to be on I am going to pick 2 lines and I want them to offset invisible lines in the middle the lines are not parallel.
View 8 Replies
View Related
Oct 23, 2012
How can I pass the contents of a cell value (text string) to Acad? I want the user to click on a cell, then have lisp use the string as the name of a block to insert.
View 4 Replies
View Related