AutoCAD Visual LISP / AutoLISP :: Post HOSTNAME To Excel
Aug 26, 2013
Lisp routine that can write to an already existing XLS file? What i need is an Excel file that will be updated with a users 'hostname' when they start AutoCAD. I can get the hostname information with the below code, but I'm not sure how to get this value into an Excel file.
(getenv "computername")
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
I wasn't able to find out any information on what format the parameters are required to look like when passed along with the Method ExportAsFixedFormat.
I'm currently using the following code to change the active printer followed by the printout command
(vlax-put-property XL "ActivePrinter" "DocuCom PDF Driver on Ne03:")(vlax-invoke-method XLS "Printout")
where XL is my spreadsheet and XLS is the active worksheet. This works but the printer controls filename and location.
(vlax-invoke-method XLS "ExportAsFixedFormat"
I've found the ExportAsFixedFormat but can not find any documentation that shows how to format the parameters within LISP to send to Excel.
The object browser for VBA in Excel shows the following:
Sub ExportAsFixedFormat(Type As XlFixedFormatType, [Filename], [Quality], [IncludeDocProperties], [IgnorePrintAreas], [From], [To], [OpenAfterPublish], [FixedFormatExtClassPtr]) Member of Excel.Chart
I recording a macro and got the following that shows some additional information.
I need to draw a table with point number, easting, northing, elevation for a lot of points and need a lisp to read the xl spreadsheet and draw the table.
I'm trying to get an excel sheet to open and count cells based on the text inside a selected column then compare it to cad. The column says "red" or "green" and I want to compare it to a count of red and green hatches in cad.
I managed to get them to be counted in cad but I'm not sure how to get the excel part to work.
Note: I posted an earlier post thinking to count the actually color in the excel cells rather than the words but that ended up being quite complicated.
I have some coordinate in the excel file. How to import from excel to dwg. All coordinate i will make polyline. I know one method all coordinate copy and paste to command prompt. But i need script file or other method.
This probably isn't the correct discussion group but not sure where else to post this.
My sales department wants to be able to create drawings based on entries in selected in their Excel qouting tool. Basically, they want to configure a product in the field, and be able to show the customer the drawing with TrueView. (They don't have AutoCAD installed).
I would think the best I can do, is manipulate a .dxf file based on their selections but that may get very complicated.
I am trying to export what looks like a table of text to Excel. The problem I have is the table is not an actual TABLE within AutoCAD but rather just columns of text with lines drawn around it. How I can grab this text and then put it into an Excel Spreadsheet.
We have a custom LISP program (Written, upadated in 2003) that takes a keyed in item number, opens and searches a .txt file with four coulmns, for the keyed in item number (column 1) and returns a part number (column 2), description (column 3) and any information in column 4.
A quetsion was asked if the data in the .txt file could be put in an Excel file. I tried looking at other post, but I can't seem to find a clear cut way to open and extract the data. Or this old dog overlooked a boand. Is there a easy way to do this, similar to the above?
I am trying to import a list of customers from column A in an Excel file into a list for a popup_list for my Drawing Properties DCL. I am having trouble finding information on how to do this.
Basically: Load the file, (workbook through active sheet: vlax-get-property)
I'm dimensioning an old drawing with the real (measured) dimensions and with the drawing dimensions in brackets (using ' 1500 (<>)' to give '1500 (1505)' for example.
What I'd like is to also be able to put on the difference between the length I type in and the length in brackets - as this would let me see any really glaring errors that can't be attributed to user-error on the laser measure.So I could type in '1500 (<>) (X)' where X is the formula, and get ' 1500 (1505) (5)' back?
How to be able to run a script that could highlight any dimensions where the number is brackets and the typed number have a a difference of, say, 50.Or failing that, any way to extract all the dimension text at the end into excel so I can see the differences myself?
I would like to be able to retreive data from a sepcified cell, in a specified worksheet, from an excel file.
I don't have any clue how to connect to an excel file and read the data. Most seems to think you already had an understanding but I'm starting from the beginning.
How can I pass the contents of a cell value (text string) to Acad? I want the user to click on a cell, then have lisp use the string as the name of a block to insert.
Is this something that is possible? Basically I have an excel file with sample data that comes coded (red background for fail, Green for pass) Then we transfer that into halos on a DWG. got a routine to count the halos in a DWG. Now I was thinking it would be nice if it compared the number to the excel file to make sure no mistakes were made when placing the halos.
So as I mentioned I've seen rountines to read data in cells but none to count cells based on colour.
how to extract the attribute value of a particular block in multiple drawings to an excel file.
Eg... there are nearly 800 drawings where I need to list down the description and Drawing number which is mentioned in the title block name "Title". The Drawing Number and the description is done in same attribute block. extract the data into an excel file or txt file. All the drawings are saved in one location.
I got a new work and get it done in the next 2 days, but first I need to do this... from a text file (or excel file, I got both) I got 3 columns, 1 one for node number, and 2 other for X and Y coordinates for each node.
So from that file I need to insert into autocad the node numbers as text (using the current style and height) at the point specified by the other two columns, that are the X,Y coordinates which will be the insertion point of text..
I am trying to export each sheet in an Excel file to an separateTXT files.
I currently have code to read each cell in a sheet, but unfortunately some of the Excel sheets have in excess of 5000 cells and it is taking too long to read. So I am switching to another method.
The program will check dates of TXT files and XLS file to make sure TXT files are current (if not, open and recreate TXT files).Then read the TXT files (much faster).
Where I am getting stuck is 2 places -
Get the names of each sheet in the excel file (not always a known name)
Save each sheet as separate TXT file.
Here is condensed code so far without error checking, etc -
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t") (action_tile "key2" "(setq B t")
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.