I am trying, to make a data extraction with Link External data with linking to a excel sheet. Everything works fine, with the data extraction.
Then I try using upload to source/download to source update, but end up with this msg. every time:
1 object(s) found.
1 data link(s) do not allow their data to be written out.
0 data link(s) written out successfully.
I have tried when it said, successful all the way, but nothing have happen in the excel sheet at that time.
What I am trying to do, is make it automatic or manual update in the attributes in the drawing. If I change something in my excel sheet and ofc. the other way around to if possible.
I inserted a table from excel to autocad with copy-edit/paste special/paste link / Microsoft excel worksheet(code) and everything seems to work nice until I closed the excel. After that no automatic updates to cad files.
PS: I checked the properties of the excel table and it is linked.
Currently we have about 30 sheets where we xref the same construction note and legend. The client is asking us to remove notes that don't apply to each sheet. For example, sheet 1 will not need note 2, 6, 10, 11. Sheet 2 will not need 3, 5, 10, and 11, etc.
Same goes for the legend- they don't want to see something if it does not apply to the sheet.
Other than bringing in those notes and legend into each sheet and modifiying it, I can't think of another way to do this. Previously, if I needed to change the wording of note 4, I change it once and I'm done. If I need to change anything now, I will need to open up 20 sheets.
Also, they want to remove the note completely, and not just cover up the note with "Not used this sheet."
I have a set of drawings with a large number of sheets. I need to do a mass edit of the properties for each sheet (for example update the revision number, date, checked/design/approved/drafting initials, description). The updated properties are largely similiar.
Is it necessary to update each sheet's custom properties individually, or is there an easier method?
So I am Loving the use of Attout and Attin for updating block attributes from a spread sheet...Currently I am producing drawings with names on desks. I have created a block with the attributes of Name and desk.
I am currently updating the drawings blocks so that I can input an excel spreadsheet with over 1500 names into the drawing using Attin (changed the .xls to .txt and roberts your mothers brother)
Unfortunately the spreadsheets I have been given have the name as one field. i.e name: Joe Bloggs, Ideally I would have the information as First Name: Joe last name: Bloggs and create two associated attributes which would enable a nicely displayed block..
is there any way that I can format the block so that the attribute displays as a multi line..e.g.
Joe Bloggs
not
Joe Bloggs.
I know I can go into each attribute (although trying to remember that command "A something Edit" I think) and edit it like a piece of txt. I would rather not have to go and do that if there is another work around..
In fact, some of the things I've found online refer that you cannot automatically replace entire Titleblock Templates for existing Sheets in the Sheet Set Manager. So, here's my question:
Can you replace all existing Sheets in a Sheet Set with an entirely new Template file automatically, without opening each Sheet and re-inserting the Title block?
Example: Let's say I have a Sheet Set. Inside the Sheet Set, I already have 20 sheets created. I then realize that my Template file is missing our company logo. I then have to open the Template file and insert my company logo. Well, this works for all newly created sheets from that point forward, but how can I get this change to automatically populate in the existing 20 Sheets that are already in the Sheet Set?
I've to put some data as like table beside the figure. I've these data in a excel sheet. Can i import that sheet in CAD? or I need use table and re-type all data?
Currently i am trying to get an Excel sheet incorporated into my AutoCAD layout. I get it in and it seems way to small. I re-scale the excel insert and get it right then update the sheet to get the new info and it shrinks back down. Now i thought at first it was the excel insert that was the problem, but now looking my layout seems to be extremely large and that's why the excel sheet is off. How can i take my existing layout and change it to fit 11x17. I really don't want to have to redraw the whole layout to make it fit 11x17.
I've made a big calculation in a Pipe Stress Analysis program and the program has auto created 10 autocad drawings that is used to find points in the system.The problem is that the program has random numbered (with no intelligence) and now I have a big report which for example points at a number some where in the 10 drawings, which is hopeless to find.
Can I somehow:
1. Find all numbers in this drawing. 2. Put them into Excel. 3. Sort them after size. 4. Add an extra column which tells which drawing I can find the number. 5. Last put all the numbers from all the drawing into one Excel sheet and sort them after size, now I have a number index, so I can find which number is in which drawing.
Can Autocad find all numbers in a drawing and let me copy them to Excel for editing?
I want to link an excel sheet with a drawing, so changing the excel changes the drawing.
I used this awesome site to learn about going to Edit->Paste Special->Paste Link->AutoCAD Entities...but I don't have that choice. Just the one that makes the OLE image. While that will work, that is less than ideal. It appears in just normal paste, but not under paste link.
AutoCAD 2007, A.54; Excel 2003 SP3; Windows XP SP3.
I have a drawing with an embedded Excel sheet. I want to read the contents of the excel sheet. Maybe in combination with Microsoft.Office.Interop.Excel?
I am extracting attributes from an AutoCAD 2011 drawing into an Excel sheet using EATTEXT. I am then manually adding columns to the Excel sheet. How can I update the Excel sheet with new attributes values later on without overwriting the modified sheet and losing the added columns?
I am trying to create a new sheet in an existing excel file and can not figure out how to do it.
I am trying to export parts lists from multiple drawings to an exisitng excel spreadsheet and I'd like have each on their own sheet. I can do everything but create a sheet. How to do this in iLogic?
Inventor Pro 2013 (PDS Ultimate) Vault Pro 2013 Windows 7 64 Xeon 2.4 Ghz 12GB
I´m having a couple of problems with getting data correctly from an Excel Sheet. I´m using the Excel Sheet to get Data for the Stock Number based on geometry.
First time the Excel File get´s opened it always cannot find the first sheet. I´m using a german Version and Sheet1 is Tabelle1 in german.
It always searches for sheet1 the first time the script runs on a new derived assembly. The second time (on second part) it correctly finds Tabelle1 and reads the correct value.Here is the code I´m using:
And there is another issue which I have solved already but still gives me a bit of a headache. When the userdefined property IdentNr gets written into the part it always defaults to a numerical value, which means that I always get a comma at the end of the Stock Number.
Only when I define IdentNr like this:
Dim IdentNr As String
the format is correctly set to Text.I expected that when you read a value from an Excel Cell that the Format of the Cell gives the format of the user defined property. Is that not correct?
When i import points (csv) from my excel sheet into Civil 3D, i can't see the actual points on the display frame, but i can see that the points have been imported by looking at the prospector tab > Points.
I have made a data link to an excel file. Then I bring it in as a table. I then adjust the text height and remove all formatting from the table. Unfortunately, after closing and re-opening the file, the table changes. I lose formating/cell alignment/text height. It isn't even consistent across the table. The lost formatting is only on the 2nd split of the table, the first side retains the corrected formatting. I have selected the option to not update excel formatting. I don't even get a notification the table is updating. There haven't been any changes to the excel sheet either....
A local search of my HD and a search on the subject here returned with zero results...
Where does one find the Inventor Sheet Metal Rules excel table for 2012 on a Windows 7 system?
All the documentation says it's located in the Documents and Settings directory, but Windows Vista eliminated that folder and thus it is not in Win7 either.
I can find the SheetMetalRules.xml file, but I need the excel table for modification.
I would like to link a series of text lines in an autocad drawing to there corresponding fields in an excel sheet, I can not use tables in autocad because of the way other software uses the text in autocad. I have attached files of the text layout in acad and of the sheet in excel. One thing that keeps me from using tables in acad is that every line of text is on a different layer, with tables you can't control the layer of table its always on the current layer.
I'm trying to get an excel sheet to open and count cells based on the text inside a selected column then compare it to cad. The column says "red" or "green" and I want to compare it to a count of red and green hatches in cad.
I managed to get them to be counted in cad but I'm not sure how to get the excel part to work.
Note: I posted an earlier post thinking to count the actually color in the excel cells rather than the words but that ended up being quite complicated.
I've created a custom title block. I'd like to use VB to fill in this title block using info obtained from an Excel Spreadsheet; Company Name, Location, Drawing Title, etc.
If you review the attached screen shot of a PDF you will see that my Excel spreadsheet object prints very light. This is added to a Paper Space layer that is same layer as the Title Block, which is printing fine. The colorful solid objects are each in their own viewports.
I have set the OLE property "Plot Quality" to "Monochrome", also I have set the "Plot Style Table" to "monochrome.ctb".
To place the spreadsheet table I have Excel open, I select the columns/rows that I want and then Ctrl-C, I flip over to ACAD and Ctrl-V to place the object, I then resize it by dragging its handles. On screen, in ACAD, it looks fine.
I am creating the PDF using "Cute PDF Writer", which does an excellent job creating PDFs from many applications. I don't think it's related to my problem. I have tried ACAD's "DWG To PDF.pc3", but had a similar problem, but worse in other aspects.
I am making an assembly where I wanted to use an excel sheet to link common paramters between the parts. I know how to do it for just my single system, but I am wanting to have all the parts and the excel sheet stored in my vault server. Is there anyway to link the parameter list to the excel file stored in the vault or how can I go about having a common file that everybody can access.
What I am worried about is if the excel file is located on my computer and someone tries to open a part on another machine, it will not find the excel parameters and everything crash.
I have a excel sheet linked to my inventor file and I cant delete it. I really only need to change the starting cell, but I can't do that either. It works on some parts to right click on the folder in the parameters window and then select delete or change start cell, but on others it doesn't work.
I am using AutoCAD Mechanical 2013. (Full version).If there is SLD with different HP rating, tag names and different cable ferrule numbers, and if there is any small change in HP rating of motor or small change in tag name, then it is time consuming work for me to go to AutoCAD and change the text by referring Excel sheet.
Is there any way to link excel sheet to AutoCAD drawings? So i can take updated excel sheet and link it with AutoCAD and if there is any change in excel sheet then it will be updated in CAD file as well.If there is any setting or grid referencing to be made. I am ready to do the required changes to meet my requirement.
I tried to match the dimensions of the already existing product with new dimension through fx parameters(using link excel sheet), while conversion all the dimensions are changed except taper value (By default it comes with inch instead of degrees) It can be changed by adding user parameter but i want it to consider from excel sheet data itself. Is it possible? For reference i have attached the snap shots
How do you embed (not link) an excel spread sheet into my sheet metal template.
The excel file is simple, 2 rows listing the A1=gauge and B1= decimal equivalent.
What I want to do with this is to get the gauge to show up in the iProperties description along with length and width of part. The thing is I need column A to show up in the iProperties (12GA) but column B to be used for the sheet metal default thickness.
I keep getting this error when I run my code.
Error in rule: Gauge, in document: Part1
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
I have been using a lisp routine to strip formatting from a linked excel sheet. (stripmtextV5) .When I try and run it on a sheet today it says some cells are locked. I've changed the cell format in the excel file to unlocked. I have unlocked the cells in the linked table. Yet it still says that some cells are locked...I have even picked in each cell to verify each one is unlocked.
