I'd like to get rid of all AEC block names in my template. I've tried BLDSYSPURGE and that didn't work. We don't currently use ACAD MEP for it's intended purpose so I just want these out of the block name list in our template for now. Is there a way to do so?
View 6 RepliesI am having an issue purging a block from my drawing. Here are the steps I have taken:
-I first used the qselect command to select the block(s), there were 4 in the drawing.
-Then I erased all four of them
- I tried to purge the block but it was not showing up in the unreferenced block list.
- I went back into the qselect to find the block to see if there were any more, and the block did not even show up on the list
- I then tried to edit the block using bedit. After closing the block editor it told me that there were still 4 block references. This had me confused because I had already deleted the the four existing blockreferences from the drawing??
- I then tried to rename using the rename command and then attempt to delete it, and no luck.
I do not know what to do at this point.
How do I purge linetypes from a dynamic block? I have hundreds of blocks that make up our legend items and I want to remove unwanted items to reduce the sizes of them.
View 1 Replies View RelatedI would like to use a lisp routine to open all the files in a selected folder, search for a blocks by name, delete them, purge the drawing, save and close.
Is there a routing that can be used to do this?
how to get same block in a drawing with different names????.
i tried if i rename it all blocks are changing???
1) Is it possible to extract data from dwf file in autocad 2012?
2)I need to extract blockNames from dwg file but i dont know how to extract blackNames because text in dwg file may change but pattern will remain same.
I am using Visual studio 2010 and Autocad 2012
I have several architects who use VectorWorks that then export their electrical to me in a dwg format. I then use a program that makes intelligent devices from their blocks. The problem is that if there are 300 receptacles that are exactly the same, there is be 300 different block names for then such as group_205-1. In the past I just individually insert my intelligent block over each one of their blocks. But Now I am wondering if there is a way to select all the blocks and give them the same name and not have them all disappear because autocad sees them as duplicates.
I tried block replace, but it is one at a time and it gets rid of the old block. I then downloaded a trial of mblockreplace.vlx. However, it seems to also make all the blocks disappear. How to give the blocks the same name in a multi-select fashion without them all disappearing afterwards?
Is it possible to edit a block name? The alternate solution is to create a new block (door) to accurate describe sizing/ type and copy to and delete old blocks w/ innacurate names. Because of the high number of doors, the alternate solution would take much longer.
View 9 Replies View RelatedI am renaming a bunch of blocks that had non-descriptive code names with new descriptive names for our power substation division. Example: 2002 -> Strain Clamp U Bolt.
I am debating whether I should put spaces in the new names or use the under-bar '_' for spaces. If I use spaces the names will look nicer and may word wrap better when I put these blocks into a tool palette. But I'm paranoid about using spaces because of the nagging feeling it might be a problem down the road, say with parsing in lisp code or something.
I have 500 autocad files and I wish to pull the border block name from each file, is there a way of doing this automatically
View 6 Replies View Relatedmy job is to make an editor for blocks in C#. There should be a WPF-window were the user can see a list of blocks. He selects one and than he should see an overview about block attributes like insertionpoint, basepoint, rotation and scaling and he should be able to edit these attributes in this form.
I know how i can populate a list of block names, but I fail at finding an opportunity to edit these attributes.
I get the blocktablerecords, but then?
We are using a title block and it has an attribute field that links to the file name. Now one of our projects is adding the revision to the CAD file name, but it messes up our drawing sheets.
i.e. It was fine when the CAD file name was 111-A222-ZZ-X-123456.dwg and this would display the complete 111-A222-ZZ-X-123456 in the drawing title.
Now we need to do this, the CAD file name, 111-A222-ZZ-X-123456-001002-A1.dwg and we still need to just show 111-A222-ZZ-X-123456 in the title block, striping away the 001002-A1.
I'm in the process of creating 3D points (as an overlay) on some laser scanned data (using RiScan, it's just 3d dimensional data, with a northing, easting and RL) and unfortunately the only export option is to export to .dxf... Which is fine but when I export, the information has the point ID as the layer name.
I am aiming at getting this data into another program to analyse and it needs the point ID or name to be my annotation, as opposed to the layer.
So what I need is a way of converting the names of each individual points layer, to the point ID.
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
How can I purge linetypes? We get data from outside sources and my goal is to load our linetypes. I have a list of layers and store the previous layer linetypes. I reset them all to "Continuous". Now I have to purge the old linetype definitions but I can't make them go away. I need to purge DASHED and HIDDEN so far. If I open the file and click on the linetype in layer manager, I still see the old DASHED and HIDDEN definitions. I have tried db.purge(linetypeobjectid) but they don't go away.
Do I need to go through the symboltablerecord to find the correct linetypetablerecord and remove it? Will that remove the linetype from the list shown in layer manager? That is what I need to do - make sure DASHED and HIDDEN *have* to be re-loaded from our linetypes.
I can actually purge these hidden line types.
The line types in question are funky looking line types that do not exist within our office. They often contain "$$" and and/or file names and other odd characters as if they are remnants of binding a drawing. In any case, they are not visible anywhere in the drawing. We refer to these drawings as being "infected".
If any object, i.e. block, text or even a simple line, is copied from an infected drawing into an uninfected drawing, all of the mysterious line types follow. And when I say all, I mean 50+. Furthermore, copying from one infected to another infected will double the line types. So, as you can see, if undetected, you could easily have 100's of "line types" on a drawing which substantially increases the size of the .dwg file.
The process that I have created (from researching on the internet) is to save the .dwg into a .dxf. Close the .dxf and then PURGE. Purging the .dwg will not work. And, you MUST close and re-open the created .dxf in order to purge these files. The you can again save as a .dwg. To complicate things, occasionally a .dwg will not save as a .dxf unless I AUDIT it first.
Needless to say, this is a giant pain in that the files that are infected are at least 50 in number. I have created a macro or two to at least reduce some of the steps. Unfortunately, since the .dxf must be closed and re-opened (which cannot be done in a macro) an all encompassing macro cannot be written.
In our drawing files, we have several layers that our office is no longer using. The layers are empty but I can't purge them. We also have a block that seems to be related to the layers we cant purge. The block is made up of only 1 word. I've inserted the block, exploded it, and erased it but I still can't purge it. There seems to be some connection between these two things, but I haven't been able solve the problem.
View 8 Replies View RelatedSo i have all these linetypes (see image) that i think originated in Microstation and have appeared on my computer when i binded a few DWGs derived from DGNs. (I can explain all that more if you think its warrented).
This is basicly what keeps happening.
- I open a brand new template, all line types are there (usual: dashed, phantom etc).
- I can work away happily, untill i copy something (a line, text, circle....) from a drawing that has these linetypes and BAM they all appear in the new drawing.
In this way, the linetypes have 'spread' into quite a few dwg's, and i cannot get rid of them once they are in the drawing and its saved.
A few other things....
- Other people in the office can open the drawings on their computers = NO weird Linetypes appear. Some open it and they do appear. (so if you open the dwg attached to this and find no linetypes, i dont know why!)
- The linetypes wont purge due to being in use etc
I would say the problem has originated from when I binded the xrefs, which is fine, but how to i fix it now?
The two main xrefs that appear to be referenced in the linetypes description are being used by other people in the workplace so i cant just delete them and start again.
what is this purge command, i practice cad 2010. i don't understand the use of purge command.
View 7 Replies View RelatedI am trying to purge all the unreferenced blocks in AutoCAD using VBA. Knowing that VBA only has thisdrawing.purgeall, I had to use sendcommand to try to achieve this.
Whenever I try to run the following in AutoCAD using VBA, the program tries to Quit and ask me to if I want to save changes. Is there a way to have it not prompt me for that? I've tried setting the FileDia set variable to 0 and it didn't work.
ThisDrawing.SendCommand "-Purge" & vbCr & "B" & vbCr & "*" & vbCr & "N" & vbCr
I have a routine to purge a drawing. I'm able to purge layers, blocks, material, dimstyle, linetype, mleaderstyle, mlinestyle, textstyle and table style. But i'm not able to figure out how to purge shape (font). Here an extract of my routine:
Public Enum ItemType As Integer
Block = 0
Layer = 1
Material = 2
Dimstyle = 3
MLeaderstyle = 4
MLine = 5
[Code] .........
In the shape Section I don't know which table or dictionary to use???
ACA 2011 Win 7 - 64
How do I purge or delete the printers/plotters from the list in the plot set up dialog. I have several that go to the same machine but are not config'd correctly or just simply not used. Can I get rid of them so I don't have to sort through when plotting?
Also, what about the list of sheet set ups in the plot dialog?
I have a file with 403 blocks in it that can not be deleted, purged, or seen. I've attempted to WBLOCK the linework out, copy and paste the linework out, exploding every object in the file, changing everything to bylayer and layer 0, purging and -purgeing, but the blocks are still there along with a number of linestyles associated with the hidden blocks. Is there any way to get rid of these blocks? I have a file attached with nothing else in it except the blocks I cannot purge. They are also not associated with any styles.
View 9 Replies View RelatedJust wanted to check if there were any reasons I hadn't considered as to why Purge doesn't want to purge certain empty layers. I'm changing the architect's background to our standards, and some layers simply do not want to go away.
All the remaining layers are turned on and unlocked.
I have exploded everything repeatedly until I cannot explode more.
I'm purging nested items and getting rid of points/zero-length geometry.
I have run a QSELECT on all the offending layers, revealing 0 items on every one.
I have erased and purged everything that was on paper space.
I have QSELECTed for every "weird" item on the drawing (block reference/point/attribute/whatever) and got rid of it.
I have locked/turned off all layers I want to keep, did a CTRL+A and hit delete.
I even turned all splines to polylines just in case.
After doing all of this, I still have 9 more "live" layers that do not want to go away.
Now, I'm aware that I have the LAYDEL option (which is what I'll be using here shortly), but I was just curious as to what drawing elements I could have possibly missed so that AutoCAD refuses to purge these layers.
I am trying to purge a layer on a drawing that the company is going to use as a template, but even that the layer is not the current one and without objects I cannot purge-delete the layer.
View 1 Replies View RelatedI'm having a small problem with linetypes that are not being used nor will they purge from a drawing. I believe that all started with the binding of an xref but now the xref has been removed along with just about everything else other than simple geometry and some text. The linetypes will not purge. For instance, if I take a standard "new" dwt file that has no problems and copy anything from an "infected" drawing to the dwt, the infectious linetypes will now appear in the dwt. And when I say anything, I mean anything. i can draw a new circle/line/point on the "0" layer and copy that new item into the clean dwt and it will take along with it the unwanted linetypes.
I have seen a similar post about linetypes not purging. And have tried the wblock solution with now luck. I have tried recover along with anything else that I could think of. Again the drawing doesn't have any xrefs and even newly drawn items, when copied, will become infected by the unwanted line types.
Also, the linetypes that are being left behind do have the "$0$" within the name. But also to mention the only ones being left behind are "powerline" and "phantom",
how to purge PDF files from your Drawing? I tried using the Image command, but it doesn't list PDF underlay's anymore. I've tried just using the purge command but it doesn't show up there either. The way I know it's there after I delete it is, (1) The drawing file is STILL really slow and (2) it shows up as a required file when I do an etransmit. Which also makes the etransmit file huge as well.
how to purge them without wblocking the file to itself?
When I open a new template all the correct linetypes are there and the drawing works fine, I can purge and they are deleted if not in use.
When I copy ANYTHING from one of my existing drawings which contains all these odd linetypes then they all appear in the new drawings and they will not purge.
ANYTHING = Text, blocks, lines... etc.
From reading about similar problems I think it has risesn from Binding/Inserting (I cant remember which one I used) of a Xref orignially from Microstation into a drawing I did about 3 months ago. The linetypes have just stuck around.
I have a large xref from a client that is causing me some grief. When I open it, I get a message about it having over 5,000 annotative scales (seriously!). What do I need to do to get rid of them? I'm not a big fan of xref's & things like this make me like them even less!
View 9 Replies View RelatedIt seems in Vault 2012 - the "Purge" looks dumb- I mean I cannot function it.Another, when I apply "Delete", it asks me to delete all the versions.I want to delete some old versions instead of the whole versions. I just got stuck there now.
View 3 Replies View RelatedSee attached dwg with a basic layer, dim style and text style template. See that there are linetypes which I can't purge.
_TEMP.dwg
Linetypes are for example:
4382_F_08-10 GA Elevations$0$4382_F_1000-1 Lower Ground Floor Plan$0$ceiling details - Model$0$SW-CA-ZZZZ-ZZZ-2SC-AR-063001_Section4-4 - Default$0$AUSGEZOGEN
That's just one name and there is over a hundred similar ones! Maybe the name is too long for ACAD to handle?
Things I've tried.
wblock selected to new .dwg
audit, purge and audit, purge again.
Copy and pasting into blank template. Step 2.
10+ years in AutoCAD and haven't came accross this before.
Got a great LISP from Lee Mac to steal layers, dimensions and Text styles from the drawing. As long as I didn't take in the Linetypes I was fine. This LISP does a whole lot more than the things described above.
[URL]