AutoCad :: Purge Linetypes From Dynamic Block
May 4, 2011How do I purge linetypes from a dynamic block? I have hundreds of blocks that make up our legend items and I want to remove unwanted items to reduce the sizes of them.
View 1 Replies
ADVERTISEMENT
AutoCAD Dynamic Blocks :: Cannot Purge Block
Aug 8, 2013I am having an issue purging a block from my drawing. Here are the steps I have taken:
-I first used the qselect command to select the block(s), there were 4 in the drawing.
-Then I erased all four of them
- I tried to purge the block but it was not showing up in the unreferenced block list.
- I went back into the qselect to find the block to see if there were any more, and the block did not even show up on the list
- I then tried to edit the block using bedit. After closing the block editor it told me that there were still 4 block references. This had me confused because I had already deleted the the four existing blockreferences from the drawing??
- I then tried to rename using the rename command and then attempt to delete it, and no luck.
I do not know what to do at this point.
AutoCAD .NET :: Purge Linetypes
Jan 31, 2011How can I purge linetypes? We get data from outside sources and my goal is to load our linetypes. I have a list of layers and store the previous layer linetypes. I reset them all to "Continuous". Now I have to purge the old linetype definitions but I can't make them go away. I need to purge DASHED and HIDDEN so far. If I open the file and click on the linetype in layer manager, I still see the old DASHED and HIDDEN definitions. I have tried db.purge(linetypeobjectid) but they don't go away.
Do I need to go through the symboltablerecord to find the correct linetypetablerecord and remove it? Will that remove the linetype from the list shown in layer manager? That is what I need to do - make sure DASHED and HIDDEN *have* to be re-loaded from our linetypes.
AutoCad 2D :: Cannot Purge Linetypes
Mar 15, 2013I can actually purge these hidden line types.
The line types in question are funky looking line types that do not exist within our office. They often contain "$$" and and/or file names and other odd characters as if they are remnants of binding a drawing. In any case, they are not visible anywhere in the drawing. We refer to these drawings as being "infected".
If any object, i.e. block, text or even a simple line, is copied from an infected drawing into an uninfected drawing, all of the mysterious line types follow. And when I say all, I mean 50+. Furthermore, copying from one infected to another infected will double the line types. So, as you can see, if undetected, you could easily have 100's of "line types" on a drawing which substantially increases the size of the .dwg file.
The process that I have created (from researching on the internet) is to save the .dwg into a .dxf. Close the .dxf and then PURGE. Purging the .dwg will not work. And, you MUST close and re-open the created .dxf in order to purge these files. The you can again save as a .dwg. To complicate things, occasionally a .dwg will not save as a .dxf unless I AUDIT it first.
Needless to say, this is a giant pain in that the files that are infected are at least 50 in number. I have created a macro or two to at least reduce some of the steps. Unfortunately, since the .dxf must be closed and re-opened (which cannot be done in a macro) an all encompassing macro cannot be written.
AutoCAD LT :: Linetypes Will Not Purge
Nov 21, 2011So i have all these linetypes (see image) that i think originated in Microstation and have appeared on my computer when i binded a few DWGs derived from DGNs. (I can explain all that more if you think its warrented).
This is basicly what keeps happening.
- I open a brand new template, all line types are there (usual: dashed, phantom etc).
- I can work away happily, untill i copy something (a line, text, circle....) from a drawing that has these linetypes and BAM they all appear in the new drawing.
In this way, the linetypes have 'spread' into quite a few dwg's, and i cannot get rid of them once they are in the drawing and its saved.
A few other things....
- Other people in the office can open the drawings on their computers = NO weird Linetypes appear. Some open it and they do appear. (so if you open the dwg attached to this and find no linetypes, i dont know why!)
- The linetypes wont purge due to being in use etc
I would say the problem has originated from when I binded the xrefs, which is fine, but how to i fix it now?
The two main xrefs that appear to be referenced in the linetypes description are being used by other people in the workplace so i cant just delete them and start again.
AutoCAD 2013 :: Linetypes That Are Not Being Used Nor Will They Purge From A Drawing
Jan 4, 2013I'm having a small problem with linetypes that are not being used nor will they purge from a drawing. I believe that all started with the binding of an xref but now the xref has been removed along with just about everything else other than simple geometry and some text. The linetypes will not purge. For instance, if I take a standard "new" dwt file that has no problems and copy anything from an "infected" drawing to the dwt, the infectious linetypes will now appear in the dwt. And when I say anything, I mean anything. i can draw a new circle/line/point on the "0" layer and copy that new item into the clean dwt and it will take along with it the unwanted linetypes.
I have seen a similar post about linetypes not purging. And have tried the wblock solution with now luck. I have tried recover along with anything else that I could think of. Again the drawing doesn't have any xrefs and even newly drawn items, when copied, will become infected by the unwanted line types.
Also, the linetypes that are being left behind do have the "$0$" within the name. But also to mention the only ones being left behind are "powerline" and "phantom",
AutoCad 2D :: Cannot Purge Unwanted / Unused Linetypes
Oct 26, 2011When I open a new template all the correct linetypes are there and the drawing works fine, I can purge and they are deleted if not in use.
When I copy ANYTHING from one of my existing drawings which contains all these odd linetypes then they all appear in the new drawings and they will not purge.
ANYTHING = Text, blocks, lines... etc.
From reading about similar problems I think it has risesn from Binding/Inserting (I cant remember which one I used) of a Xref orignially from Microstation into a drawing I did about 3 months ago. The linetypes have just stuck around.
AutoCad :: Bogus Linetypes Unable To Purge?
Apr 25, 2013See attached dwg with a basic layer, dim style and text style template. See that there are linetypes which I can't purge.
_TEMP.dwg
Linetypes are for example:
4382_F_08-10 GA Elevations$0$4382_F_1000-1 Lower Ground Floor Plan$0$ceiling details - Model$0$SW-CA-ZZZZ-ZZZ-2SC-AR-063001_Section4-4 - Default$0$AUSGEZOGEN
That's just one name and there is over a hundred similar ones! Maybe the name is too long for ACAD to handle?
Things I've tried.
wblock selected to new .dwg
audit, purge and audit, purge again.
Copy and pasting into blank template. Step 2.
10+ years in AutoCAD and haven't came accross this before.
Got a great LISP from Lee Mac to steal layers, dimensions and Text styles from the drawing. As long as I didn't take in the Linetypes I was fine. This LISP does a whole lot more than the things described above.
[URL]
AutoCAD 2010 :: Unwanted Linetypes And Text Styles Unable To Purge?
Jul 17, 2013We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
AutoCad :: Purge AEC Block Names?
Jan 24, 2012I'd like to get rid of all AEC block names in my template. I've tried BLDSYSPURGE and that didn't work. We don't currently use ACAD MEP for it's intended purpose so I just want these out of the block name list in our template for now. Is there a way to do so?
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Delete And Purge Block By Name
Sep 30, 2013I would like to use a lisp routine to open all the files in a selected folder, search for a blocks by name, delete them, purge the drawing, save and close.
Is there a routing that can be used to do this?
AutoCAD Dynamic Blocks :: How To Save Dynamic Block Using Save Block Icon
Sep 20, 20131. What is the easiest way to find points that are not constrained? I get a notice that the block is not fully constrained and its a nightmare going through all the lines trying to find where I need to apply a constarinet.( I can't wait to get off ACAD and back to Inventor.)
2. When I try to save a dynamic block using the Save Block icon under Open/Save, if the dynamic block is not fully constrained, and I click save, when I reopen the block to edit all of my constraints are gone, this has happened twice. Now I just exit by Xing out and saving changes.
AutoCAD Dynamic Blocks :: Link Dynamic Block Custom Rotation Action
Mar 22, 2013So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
AutoCAD Dynamic Blocks :: Moving Properties Table Grip In Dynamic Block
Jun 13, 2013I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
AutoCAD Dynamic Blocks :: Flipping Dynamic Block With Multiple Items Not Visible
Jul 25, 2012new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Create A Dynamic Block For Glass Panel In Balustrade
Feb 28, 2012I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
AutoCAD Dynamic Blocks :: Insertion Point Of Attribute Changing Within Dynamic Block
Nov 21, 2011I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
AutoCAD Dynamic Blocks :: Pass Attribute Values To Dynamic Block Parameters?
Dec 4, 2013I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: How To Disable The Dialog Box Shown When Open A Dynamic Block
Nov 7, 2011I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
AutoCAD Dynamic Blocks :: Make Dynamic Block Of Column Radiator
Mar 26, 2012I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
AutoCad :: Insert Dynamic Block From File With Multiple Dynamic Blocks
Jul 16, 2010I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
AutoCAD Dynamic Blocks :: Join Two Dynamic Block To One Common Action?
Sep 18, 2013I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
AutoCAD Dynamic Blocks :: Stretch Dynamic Block Grip Points
Feb 4, 2011I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
AutoCAD Dynamic Blocks :: How To Create WAVE Dynamic Block
Mar 1, 2013I would like to create a "wave" dynamic block, see below...
It is made from wipeout.
Is it chance to make a similar?
If I make a list for the length (from 125 to 350), after can I make a table /list /summary where these size are shown?
AutoCAD Dynamic Blocks :: Scaling Objects In Dynamic Block
Jun 27, 2013Why the drawing title in my dynamic block will not scale up or down. The rest of the objects scale properly but just this the drawing title text attribute will not follow suit.
I tried adding position point and link, etc....I run out options and don't know how to fix this.
LT 2012 user
AutoCAD LT 2012
Windows 7 - 64 bit
AutoCAD Dynamic Blocks :: Grip Point Dynamic Block
Nov 15, 2012I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: How To Keep An Object Centered On A Dynamic Block
May 29, 2013I am creating a dynamic block of a conveyor belt it has a set number of widths and needs to be stretchable in length, which I have managed to do. The motor is placed half way down the length of the conveyor and needs to stay centered
I know I need to use the move command and put in a factor of 0.5 somewhere, but I can't remember how to do it.
AutoCAD Dynamic Blocks :: Create Dynamic Block With Dimension
Jan 4, 2014I have a drawing with dimensions. Now, I want create Dynamic Block Controlling Visibility with dimensions in drawing with name dimension.
LT-don-TD LT-Kdoc-TD LT-Kngang-TDLT-don-thay LT-Kdoc-thay LT-Kngang-thayLT-don-moi LT-Kdoc-moi LT-Kngang-moiH-don-TD H-Kdoc-TD H-Kngang-TDH-don-thay H-Kdoc-thay H-Kngang-thayH-don-moi H-Kdoc-moi H-Kngang-moi
Then, I use command DAL; I can select dimension want use.
AutoCAD Dynamic Blocks :: Stretch A Hatch In Dynamic Block?
Jul 4, 2013How do I stretch a hatch in dynamic block? It does not seem to work if I select the hatch along with other lines of a counter block.
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: Keep Item Centered In Dynamic Block?
Mar 5, 2012I have an X centered as my insertion point.
When I stretch the dynamic block for a larger area the X stretches but into the next single box but not centered within the double space.
how to get the X to be centered in the box when it is enlarged to a double or triple size?
AutoCAD Dynamic Blocks :: Mirrored Rotation Dynamic Block
Jun 14, 2012Is it possible to mirror a rotation within a dynamic block?
See the attached drawing. I am trying to have two rotations within a dynamic block, but only one grip. When the grip is rotated one half of the block rotates while the other half rotates in reverse. The resulting action would be much like the wings of a butterfly.
I have tried many different combinations of parameters, actions and constraints with no luck. The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?