AutoCad :: Pipeline Route Profile (graph)
May 15, 2012I am facing a problem in autocad. The attachment is a pipeline route profile(graph). I am facing the problem to plot the graph.
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Convert (scanned Plan And Profile) For Pipeline To Feature Line
Aug 13, 2013I have a 2D (dwg) plan and profile of pipeline ( Scanned) and I am going to find a way to have this pipe as 3d ( or featureline).
I can't do this manually because this is a long pipe.
Illustrator :: Can't Edit Graph Value Axis When There Are Multiple Graph Types In One Chart
May 30, 2013Illustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.
Illustrator :: Insert New Data On Existing Graph / Graph Deletes
Jun 25, 2013When I insert new data on an existing graph (for example, just adding a new year of data) and press insert, it just deletes the graph entirely. My only option is to recreate the entire graph which is frustrating because I lose its format and colors.
View 4 Replies View RelatedIllustrator :: Graph Tool - Display Values On Graph
Feb 4, 2014I have a column graph. I want the data values to display in the columns. How do I do that? Here's what I have now:
I want the values 270018, 283148, etc. to display in the graph. Is that possible?
Illustrator :: How To Use Line Graph Tool To Insert A Graph
Oct 9, 2012I'm totally new to Illustrator and want to use the line graph tool to insert a graph that passes through 0,0 and runs to 24,24. I want the x and y axes to meet at the origin. As it isn't working as you can see. I've used 0, 0 and 24, 24 as my data points. Is there any way I can change how this is presented so it's clear that it's at the origin?
I'm using CS6, if that matters.
AutoCad :: How To Do Pipeline Layouts For Coatings / Inspections
Oct 4, 2012how to do pipeline layouts for coatings, inspections etc. I've been involved with things such as Labview so I'm not exactly new to design sw.
View 6 Replies View RelatedAutoCad :: Drawing Pipeline Layout And Its Deformation?
Jan 20, 2013I have a 2D pipeline layout. Nodes on the pipe are known by their X and Z coordinates. A FORTRAN written code calculated the nodes displacement in 2 direction of x and z.
I have to draw the nodes, connect them to each other to obtain pipeline layout and then draw the x and z deformations separately to show the deformed shape.
Input format is like
PN x y z
1 0 0 0
2 0 0 10
10 0 0 100
20 10 0 100
40 40 0 100
I though ACAD might be an easy tool to do this. I am trying to use MacLee's or Geobuilder's LISP routine to import the x and z coordinates into CAD.
MAcLee's routine doesn't recognize node numbers at the beginning. So I shifted into Geobuilder's rotine. Still I am trying to use but with no lock till now.
Any easier method for drawing these simple stuff, coordinates and deformation? Is it possible easily in ACAD? My other limitation is that ACAD is the only software I have in my hands.
AutoCAD Civil 3D :: 2012 - Alignments To Designate Pipeline
Jun 18, 2012At our office We use alignments to designate the pipeline. At our pi.'s or points of intersection We have the autocrat _wipeout circle. It works fine in c3d 2011, but for some reason when We take them into c3d 2012 the wipeout circle goes under the red line instead of above. We have checked through the properties and can not find a display order. Otherwise We are currently inserting a wipeout circle and having to place on At every intersection.
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Get Corresponding Z Value For Say About 2000 Points On Pipeline
Dec 19, 2011What I have is a topo plan in 3D (All contour lines have x, y and z values). My pipeline is on x and y coordinate only. I need to get the corresponding z value for say about 2000 points on the pipeline.
View 9 Replies View RelatedAutoCad 2D :: How To Route Some Text On Panel
Jun 9, 2010I've got a customer that I'm working with where we need to route some text on panel goods. However, as we all know, when you explode text it don't look too pretty since you lose the fancy curves and such.
That said, a solution to smoothing out the curves that doesn't require hours of tracing each letter with a spline? Any way that I can get some vector linework.
Maya :: How To Use Xgen In Pipeline
Nov 22, 2013This is my first time trying to use Xgen in our pipeline so I am hoping this is just user error. I have a Xgen discription that populates a plane with rocks. I have gone through all of the suggested set-up steps in the user manual for batch rendering.
When the files render out all or some of my rocks will dissapear for 1 frame and then come back spuratically There doesn't seem to be a ryhm or reason to which packets or which machine it happens on. I have re-rendered the scene twice now and each time the anomolies occur on different frames.
Rendering using mental ray at 32 bit with render passes
AutoCAD Inventor :: Turn Off Auto Route Function?
Apr 23, 2013How to turn off the Auto route function?
View 1 Replies View RelatedAutoCAD Inventor :: Pipe And Tube Route Turns Red?
Oct 31, 2013I am having an issue with pipe and tube routing in inventor. I am new to it and every once in a while a route that i create turns red in the browser bar, I also noticed that a few of the routes have issues where the adaptivity gets turned off by itself. I assume this has something to do with the route turning red.
inventor 2014 professional
AutoCAD Inventor :: Save AS Copy To DXF - Route Does Not Function
Jun 24, 2013I am having a problem with Save AS Copy To DXF.
When I try the 'Save copy as' DXF route it does not function. If I click the save button nothing happens and if I click the option button nothing happens either. In 2012 when you click the options button you would have got the option to change the export settings i.e. all sheets etc...
I do have the option to change the file formats via the drop down box in the 'save copy as' dialogue box and dxf etc are listed!
When I right click on the flat pattern in 'Model' there is no button for 'Export' in the list that appears. Therefore I cannot get to the Flat pattern dxf export options prompt as shown in this thread.
Its obvious you should be able to save as a dxf from an inventor idw as the buttons are there they are just not working!
I am having this problem with Autodesk Design Suite Premium. Inventor 2014 will not give me options, and is having problem exporting to autocad dwg. tried a reinstall as it appears to wotk properly on other similar installed machines.
AutoCAD Inventor :: Piping Route Will Not Update When Change Dimension
Apr 12, 2013My piping route will not update when I change a dimension when editing the route itself. See below. I can change a dimension, the 3D sketch of the route will update, but the pipe will not move into the correct position. Doing multiple rebuilds and updates does not update the piping.
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
AutoCAD Inventor :: Get Route To Populate With 1/2" Tube Or Pipe?
Nov 8, 2012After creating the route, I can not get it to populate with the actual pipe. How do you get the route to populate with a 1/2" tube or pipe?
View 1 Replies View RelatedAutoCAD Inventor :: Tube And Pipe Run - Edit Route Failed
Nov 28, 2013I've authored custom tube and pipe components, published them to library and created a custom tube and pipe style. But when I want to create a route with my custom style I get this error message "Edit route failed". The style only consists of a pipe and 90 elbow. All the other styles seem to work.
I also tried to create a custom style for tubing with bends and it worked fine so I guess it has something to do with my elbow.
Lightroom :: Make 10 Bit Display Pipeline Capability
Feb 27, 2013Is Adobe going to make Lightroom 10 bit display pipeline capability?
View 8 Replies View RelatedAutoCAD Inventor :: Show Tube And Pipe Route Sketches In Drawing?
Oct 1, 2013I'm trying to show my tube and pipe route sketches in my drawing without populating my routes. In the past my tube and pipe assemblies have caused me and my company many problems. not populating the routes until final release can speed up our process a little bit.
View 3 Replies View RelatedAutoCAD Inventor :: Derived Route - Minimum Length Violation (Too Short To Continue)
Jan 25, 2012When I use Derived Route I get "Minimum Length Violation(Too short to continue)". How can I fix it. Is there any parameter that I can define minimum length.
View 7 Replies View RelatedAutoDesk Smoke :: Smac 2013 As Grading Tool Into Pipeline
Jul 24, 2013I've seen in action the Resolve and I don't really like it.. Using Smac as grading tool in a pipeline? I mean, any colorist using Smac for grading?
View 3 Replies View RelatedGIMP :: Animated Route Along A Map
Feb 12, 2010How to create an animated route along a map. Here's the final image...
While these steps will only show how to add a single route to a map, you can add as many routes as you would like and even instruct the script to start on any layer or have any number of frames.
I'm using GIMP 2.6.6 for the tutorial. You will need the following script installed to complete the tutorial ->Animated Path Stroking Script Suite. The script zip file was updated today (December 26, 2013) to include brushes from GIMP 2.6. GIMP 2.8 no longer uses them, but in order to run the script effectively without having to modify the script itself, please add the brushes to your GIMP brushes folder here: C:/Program Files/GIMP-2.0/share/gimp2.0/brushes There have been no changes to the script, so if you have the previous version, there is no need to install it.
It's probably a good idea to have the animation settings script installed on your computer so you can quickly adjust the timing of the layers. That script can be download here-> saulgoode's animation settings script
Let's begin.
Step 1
Open up your desired map in GIMP. I'm using one from Google that's near my house in Central Florida and I'll show you how to get to Disney World.
Step 2
Create a duplicate of the map so you have two layers. Here's a screenshot of the layer dialog window.
Step 3
Grab your path tool and start creating your path on the image. Here's what my path looks like. I started near the green dot and finished at the red dot. The path will be painted in the direction you draw it.
Step 4
With your path now drawn, make your top layer active by clicking on it in the layer dialog window...(It's highlighted in blue in my screenshot.) This is the layer we will start drawing on. The bottom layer will be left untouched.
Step 5
Choose the brush you want to paint with. I chose the Circle Fuzzy (07) and set the spacing to 1.0
Step 6
Click on the Paths Tab in GIMP and it will show the path dialog window and all of the paths you have for that image. Right now, we should only have one. Right-click on that path and choose Animated Path Stroking.
Here's the settings I picked...
Click OK and script will do the rest and your animation should look something like so:
Step 7
If you want to alter the speed of the layers, make sure you installed the Animation Settings script I recommended at the beginning of the tutorial and go to Filters > Animation > Settings... Under delay you set the timing. The larger the number the longer the delay. I picked 100 and set the mode to Replace. I then added a longer delay (1.5 seconds or 1500 ms) to my first and last frames. To do that, I double-clicked on the layer name changed the timing number to (1500ms), and then hit the <Enter> key. Make sure you hit the <Enter> key so that GIMP will know to make the changes.
That's it! Give it a shot and see what you come up with. Try adding more routes to the map, changing brush size, colors, and altering the number of frames they are drawn over. Don't be afraid to experiment with the settings. Undo is your friend!
Paint.NET :: How To Create Motorway Route Brush
Feb 17, 2011Consider road maps where motorway routes appear. Let's say the following images:
[URL]
(motorway is represented by a blue-white-blue line)
[URL]
(a bit more complex, motorway is represented by a black-orange-black-orange-black complex line)
Is it possible to create a brush in paint.net such that we can directly draw something like that?
Remember, the direction in which the pattern is drawn should always instantly change in synergy with the direction in which the brush tool is drawn.
3ds Max Animation :: How To Import Image Showing Route Between Two Houses
Dec 8, 2011I am fairly new to 3D Max animation. My intention is to first import a Google earth image which shows the route from House A to House B. Then by 3D Max animation I want to show the direction from House A to House B. The aim of the animation is to just show the direction from House A to House B.
As a first step I want to import the image to Max. Then by keeping that image as a background. I want animate a direction arrow which is comprised of spheres and an Arrow head. To understand it better please refer to the following;
S= sphere
X = ARROW HEAD
(House A) S1 S2 S3 S4 X (HOUSE B)
0th 5th 10th 15th 20th
frame frame frame frame frame
To do this I first create a sphere over the image close to House A then I set a key at 0th frame. After that I am moving the slider to the 5th frame and I am selecting the first sphere and I make a copy of it by holding shift. And then I am placing the 2nd sphere at a distance from 1st sphere after which I set a key at the 5th frame. I am following the same procedure till the 4th sphere.
After this I dont know how should I make the box appear on the 20th frame.
I have attached an image for reference.
VideoStudio :: Removing Route Line From Video And Only Keep Icon Moving?
May 9, 2012how to remove the route line from the video and only keep the icon moving?
View 1 Replies View RelatedAutoCAD Inventor :: Existing Pipe Route To Create A New Pipe Run And Place It Into New Run?
Mar 6, 2013Is there a way in inventor if you have an existing pipe route to create a new pipe run and place that existing route into the new run.
View 3 Replies View RelatedAutoCAD Civil 3D :: Data Panel Is Missing / Data Connect Route Doesn't Work
May 3, 2013I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
AutoCAD Inventor :: Create Pipe Route Using The Tube & Pipe Run
Jul 26, 2013I'm trying to create pipe route using the tube & pipe run. And its not constrained when I try to drag away. I tried grounding the components which is not working either. since the routing opens in 3dsketch its kinda tricky to make it fully constrained.
View 2 Replies View RelatedPhotoshop :: Set Clone Source Point Which Moves In Opposite Direction Of Cloning Route?
Oct 4, 2013Is it possible to set a clone source point which moves in the opposite direction of the cloning route?
View 4 Replies View RelatedAutoCAD Inventor :: Graph Hydraulic Cylinder Load
Aug 27, 2009I have a cantilevered arm that must rotate from 0 to 90 degrees. I would like to lift this arm with a hydraulic cylinder. How do I (using Dynamic Simulation in Inventor 2010) graph the actual load that the cylinder is under for each degree of rotation of the arm. I can use the spring/damper/jack joint (using negative values, reverse of a jack) and apply a load and graph this but the load is constantly increasing. In the scenario of lifting this arm the load will actually decrease at some point of rotation. I would like to see the true loads throughout its rotation.
View 6 Replies View Related