I have a drawing with polylines filled with hatching. When I pdf it the lineweight of the poly line is different to that of the hatching....eventhough they are on the same layer and the lineweights is set to 'by layer'.
I have a few rectangles on the drawing which aren't effected...its only the poly lines....
How to add and delete a “lineweight” from the lineweight list?
I’m wondering if there is a way to add and delete lineweight from the lineweight list?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedI would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedDue to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedIs there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedI am trying to embolden lineweights to stand out on the drawing, without them getting in the way when viewing in the drawing. I have set the lineweight in the layer dialogue box to the max size (2.xx mm), checked the "plot lineweights" in the printer dialogue and switched between none and grayscale (this is so the assigned colors will fade out in the background). Nothing I have tried thus far has changed the print output on any of my printers (virtual PDF, HP2100, HP2600n, HP2840 they are all very old). I have read through the lweight command and help sections, but I don't need it assigning the lw just getting it to properly print.
One possible problem: is the line weight relative to scale or is it absolute? I am printing at 1/8" scale, and that can't change.
I already change the lineweight on the properties but nothing happens to the line. What's the matter?
View 2 Replies View RelatedQuick question about plotting to a PDF. I'm using autocad 2013 and I'm plotting to a PDF printer called bullzip, a free PDF printer. My question is, will my line-weights be the same if I have kinko's print a PDF file with my drawings in them
View 2 Replies View RelatedMy AutoCAD LT lineweight settings keep resetting from drawing to drawing, is it suppose to do it or what?
I just want my lineweight settings always (for any drawing) to be as I set them!
I am currently converting my drawing to PDF. However, certain lines on the drawing are showing up bold and thick when converting. I understand that they are appearing and disappearing due to me turning on or off the hide/show lineweights feature. But I would like the lines to be default size. I don't need them thick.
View 7 Replies View RelatedI am running two networked computers and a networked Designjet 510 plotter. One computer runs LT2013 and the other LT2014.
I am having an issue with the LT2013 machine in that it plots much darker than it should (uses a heavier lineweight). I have checked the plotter set up and plot style and both appear the same.
Im trying to print a logo for my detachment using Autocad to PDF but for one the line dont show up in the PDF file and second the original color of the drawing is faded. Black goes to a smoke grey color, lines dont show up, and the red is blurry. I need this to be fixed but I just dont have the skill to do it. And stupid autocad doesnt have a contact number for step by step instructions with an actual human! Im trying to use the logo for a T-shirt but it seems like I cannot for the life of me print a suitable digital image for it. I am using AutoCad ARCH 12...
View 4 Replies View RelatedI have a few objects on a layer (Circles and Lines).
I am trying to make them "Thicker". I have tried adjusting the layers "Lineweight" as well as individually selecting them and adjusting the lineweight but neither is working for me.
Using AutoCAD 2011 we always use 0.00 as our default line weight but the default will change to 0.010 with no real pattern. It can be any drawing at any time. We have reset this dozens of times without being able to stop it from reoccurring.
We are also not able to get line weight to display (yes we check the Lineweight Settings, Display lineweight box) again on random drawings at random times.
I have a drawing with numerous copies of a particular block. I would like to change the Lineweight of the attribute so that it is reduced in all of the blocks in my drawing. How can I do this?
View 2 Replies View RelatedI've just installed ACad2013 & now my dwg - pdf plotter is showing unweighted coloured lines (prints) instead of 'weighted' black/white lines. These then print out incorrectly. How I can revert to my former pdf print settings
View 3 Replies View RelatedUsing acad2011, i have a flatshot image on a separate layer. The lineweight is set by layer, but when i change it in the layer properties manager nothing happens... There is no change to the blocks created by flatshot on the specific layer (other objects do change lineweight).
View 9 Replies View RelatedWhen I copy objects from a drawing to another drawing in .DWG, it appears that the lineweights becomes different between the two drawings.
For example, let's say there is a layer whose Lineweight is 0.3mm, Color is green and Linetype is continuous on the source drawing file. You notice the objects under that layer should be thicker. After copying to another drawing or destination drawing file, I noticed the layer got transferred across which is good and everything else associated with that layer. But then, I noticed on the other drawing, the objects on that layer are not as thick as that of the source drawing file. When i checked the layer on the layer properties manager, it shows the lineweight is 0.3mm. I wonder why the lineweight of the objects are different as if they are 0.00mm and what should I do to keep it consistent on the other drawing after the copy.
All my lines are the same lineweight when I plot, they do show differently on my computer screen, how can I fix this?
View 6 Replies View RelatedSomehow i can't draw lines with different lineweight. I can change the color and the linetype but the lineweight doesn't. In the properties toolbar over the workspace the last option (after lineweight) is not active and shows bycolor!I suppose that is the problem why i can't draw lines with different lineweight!
View 9 Replies View RelatedIn some drawing I checked the color and lineweight in the Properties but it says By Layer and By Block. How will i know the real color and lineweight?
View 4 Replies View RelatedHow do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedI have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedThere doesnt seem to be a way to control the lineweight of text in a table. I have changed the color of the text and I have applied a lineweight to the table but the text is way too light. I spent a bunch of time putting info into tables and it looks like total crap and I cant seem to change it. What is up with this?
View 4 Replies View RelatedI realize I am probably using ACA against the way it is meant to be used, but is there a way to get back the linetype and lineweight menus that are on the classic view toolbars but not the ribbon? I just upgraded to 2012 and decided to bite the bullet and just use the ribbon, but it's really just not working out. Unfortunately I only have ACA yet am doing non-architecture work so really need to be able to modify lines without creating a different layer for each type.
View 3 Replies View RelatedI have an interrogation: If the lineweight in my .pc3 file is set to "Use object lineweight" & that color is assigned to a layer with the lineweight set to "Default" How is the lineweight determined when plotting (assuming no lineweight overide on any objects)?
View 4 Replies View Related