How can I extract text from polyline area. Ideally scaled by some factor (drawing in millimeters convert to area in meters).
I need to write a lot of areas of some room etc. into them and i want to know if there is another possibility than select polygon note the area and make text.
I'm unsing AutoCAD 2005 CZ.
Imagine i have a polyline(2d or 3d doesn't really matter),and i want to extract the coordinates info of every vertex on the polyline from start to end.
How do i do that in AutoCAD?And if not is there a way to do it on any of the verticals?
I have some experience with Vb.net.
But I have a problem:
I have a polyline
I select it
The result to be a message box with the intersection points for all the lines, polylines that intersect this polyline.
is there a way to extract a 3D poly line where two surfaces intersect each other.
i have ground surface and i have dam surface. they would like to show the filler material in the cross section graph.. so i copied then raised the surface the required depth.
so now the surface and side slope of the dam intersect. and i would like to trim the filler material surface to be in line with the dam.
I have a inserted block with 4 tags for Length, Thickness, Elevation and Width.How can extract attributes tag values and draw a closed polyline + 2 internal lines, parallel to the block?
Block Name: ID_DATA
Tags: LEN, THI, ELE and WID.
Each internal line placed in a third width.
I created walls for a structure by drawing a simple polylines and extruding it by the Z axis, so that i get a vertical plane. I created a number of such planes in the layer. I want to extract total area of this layer which has these polyline extrusions (planes). I know the command of add area, but it is a tedious process and does not work for curved planes. How do I extract the area for the entire layer in one go ?
View 9 Replies View Relatedhow to get the area of this polyline .........
i used properties command >>>
i used li command >>>
i used area then o command >>>> it says that area = 362.5350 ok this is wrong ..
i calculate the area of the polyline by separating it to parts then subtract the area >>> 368.62 - 7.79 = 360.83 this is the correct area
actually this is to hard to separate polyline to parts, when i have alot of polyline.
i guess this problem causes, when you have self-intersecting polylines the file is attached ..
Is there a way to calculate a (closed) 3D polyline area ?
View 8 Replies View RelatedAutocad 2011 and 2011 LT both give the wrong area for sertain polylines. While Autocad 2005 gives the correct area.
Its terrifying how many official documents may be wrong because of this bug.
Presently the "AREA" of a closed polyline is in "sq-in" first, THEN "sq ft".
For everything I do, and likely others, I need sq ft - without having to waste time and roll my cursor over the results.
Is there ANY way to change this default to have sq ft FIRST!??
I was wondering if there is a settings for the displayed values in a polyline's properties. Such as area. Normally it will display square feet but I would like for it to also display acres. I know it a simple conversion, but over the course of a year or more it could save me alot of time.
View 2 Replies View RelatedI have linked my drawing to a database with text inside a closed polyline. Is there a way to have the area of the closed polyline stored in the database as a live area.
View 8 Replies View RelatedHow to list the area of a polyline or by points and have the output displayed in acres?
View 6 Replies View RelatedI would like to convert a spline to a polyline for the sole purpose of finding the area. Is there a way to do this or is there another way to find the area of a spline? Typing list does not give me the area.
View 9 Replies View RelatedI am using Photoshop CS5.
Right now I am trying to extract edited area and add some effects only on the area. I added some hand paintings on a picture and I need to extract hand painted area from the picture and add some effects on the extracted hand paintings and combine it with the original picture. I know I should hand paint on a different layer and add some effects on the layer and combine it with the picture, but I have to do what I am doing right now.
See pictures below.(those pictures are much simpler than my pictures I am editing right now)
There is a layer that has only 1 color, green.And 2nd picture has pinky letter A on 1st layer, so 2nd layer has green and pink color. I need to extract pinky A letter from 2nd layer and need to add some effects only on the letter A, and combine 1st layer and edited letter A to make 3rd layer.
I tried to use blend mode Difference to extract edited area but it changes the color of the area.And I don't want to use select tool & alpha mask, because my picture is much complicated.
What I want to do is something like Difference Matte effect in After Effects. Is it possible in Photoshop?
[URL]........
[URL]........
I have an irregular shaped polyline in civil 3d that needs to be 31.5 acres. It is currently 32.8 acres. Without manually rescaling this polyline over and over again in order to achieve a polyline that represents 31.5 acres, can Civil 3D automatically draw the polyline to represent 31.5 acres for me?
View 9 Replies View RelatedI have a closed polyline that i can add the area to via a field in mtext using the options under area. I would like the area to always be rounded down to the nearest square meter. Is the a way to do this via the acfields.fdc file?
View 8 Replies View RelatedI need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.
Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database
[Code] ......
I was just wondering why when I try and calculate an area using a polyine, I am getting a readout of 1.80401967E+07, when I have it set to give me the calculation in square feet? It is an area of approx. 246 Acres.....is this because the area is so large? I am not sure what the "E" stands for or the "+07" at the end....
View 6 Replies View RelatedI've read 2013 is going to include line labeling capabilities by selecting 2 points rather than selecting linework. Is there going to be a way to label an area without creating a closed polyline or parcel, where it works the way a hatch works. So if I selecting in the middle of multiple individual intersecting lines, it labels the area.
View 9 Replies View RelatedI am using 2012 autoCad. I have created an external MS access database in 2010. I want to map some fields like Polyline areas to DB field. DBConnect wasn't that much usrful to me for external databse.(Or I might be missing something).
Is there anyway that I can map AutoCAD-2012 Polylines to External database field so that updating polyline auto updates the database??
I have many floorplans and each room has a polyline around it.
What I'd like to do, is be able to select multiple (or single) polylines and have a dynamic field with the area attached to each polyline placed in the middle (or on a consistent edge, say top left). Preferably with custom units as we use mm for the drawings, but would want the area in m2. Also custom text heights.
I can find a lot of 'put the area in the middle' scripts, but they're either not dynamic or they require a click to place each one - and with over 700 floorplans and over a hundred or more rooms on some, it's not really possible to do each one individually!
I'd like to set up a blockwith different attributes like Roomname, Floor, Area,...
Therefore I'd like to link a polyline of the drawing with the block and it shows me its area. I know how it works with fields, but not how to connect it when the field is within a block.
Is there a LISP for that?
LSP file i downlaoded from web.it is to use for Area with (m2) and room name. by click polyline.
i want to modify it to use without adding Room Name, just insert area to the drawing.
(defun drtxt (/ rn tx ls vl lt ht lb hb nr pt)
(setq tx (strcat "Area: "
(rtos (/ (getvar "area") 1000000) 2 2)
" m2"
)
rn (getstring "
Room Name: ")
[code]....
I create a lot of fields that reference a polyline area and I'm constantly having to change the default formatting values. I would like it to default to an Architectural format, WITHOUT the appended "SQ. FT." (which often takes up too much space), with a precision of 0 and using a comma as the Thousands Separator.
Is there any way to set these default values?
I have a drawing which has hundreds of levels on and i'm trying to establish what the MEAN level is and the AVERAGE level. I thought the best way might be to extract the text to excel and perform it there but at the moment the only way i can do it is to copy and paste the text and its taking me forever. Is there a way to either a) extract text to excel or b) calculate a MEAN value based on texted selected?
View 2 Replies View RelatedIs there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?
View 1 Replies View RelatedI have multiple closed areas that i want to show the sq ft. Now i use the command multileader then click to insert a feild.
Select object then area. Now i have a leader with text. Can i extract the text to a table or spreadsheet. Or approach this differently. I use autocad lt 12
In IV 2011 can text be word wrapped in the defined text area.
View 2 Replies View RelatedI work for a translation company and I've installed a Trial Copy of Corel Draw X5.
I have a 6-page document with several text areas (the Obect Manager sees them as Artistic Areas [I think]).
I'm trying to extract all the text into a text (prefferably an XML), file translate the text using Trados, then import the translated text file back into the Corel Draw Document, with the appropriate text in place of the original text.
I've tried using Extract / Merge text, but this doesn't seem to work.
Gimp 2.6.8 on Linux openSUSE 11.3
I need to extract text and font from a text layer. No problem, I thought, with gimp-text-layer-get-text and gimp-text-layer-get-font.
But I find that the original text layer was cropped withplug-in-autocrop-layer. Nevertheless Gimp lets me edit the text with the text edit tool - after a confirmation dialog.
But I can't get the text with script-fu. Is there a way to manage it? There are many files involved.