I would like to convert a spline to a polyline for the sole purpose of finding the area. Is there a way to do this or is there another way to find the area of a spline? Typing list does not give me the area.
View 9 RepliesI have one drawing but this is Spline but i want to convert it into polyline. without tracing it. i attach my dwg file with this massage.
View 9 Replies View RelatedHow can I convert Spline to Polyline.
View 9 Replies View RelatedOur customer send us drawing with ellipse into.With Autocad 2008 I bought a plug-in call SplineConvert that did the job perfectly but not compatible with 2013.
Is there any plugin that could replace that tool ?
Is there any standard ACAD command that could easily do this Job ?
I need a way to make 2 or 3 times per week this converting on all ellipses of large and detail 2D drawings so no time to offset in and out all those .
I try also DXFOUT in R12 but all the spline are being converted into 3d polyline making a huge files that froze my PC.
I also try FLATTEN but did not see how it work , the ellipse stay an ellipse.
Our customer send us drawing with ellipse segments into.
With Autocad 2008 I bought a plug-in call SplineConvert that did the job perfectly but not compatible with 2013.
Is there any plugin that could replace that tool ?
Is there any standard ACAD command that could easily do this Job ?
I need a way to make 2 or 3 times per week this converting on all ellipses of large and detail 2D drawings so no time to offset in and out all those .
I try also DXFOUT in R12 but all the spline are being converted into 3d polyline making a huge files that froze my PC.
I also try FLATTEN but did not see how it work , the ellipse stay an ellipse.
Due to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
Im using autocad lt 2004. My plotter does not recognize splines, and I would like to convert them to a polyline. How to do this, been trying to do if for a few days now but to no good.
when I highlight the spline it will not give me a option to turn the spline into a pline.
I am a student and I am trying to transform a spline into a polyline with the AutoCAD 2009 that with have at Uni for the CNC machine but "pedit" doesn't work.
View 2 Replies View RelatedI have three contiguous splines. I'd like to make them one continuous entity, either spline or polyline. How do I do?
I've gone to Modify/Object/Spline and to Modify/Object/Polyline and neither seem to work.
I need to draw a polyline (or spline) in the XY-plane, followed by a vertical segment before continuing in the XY-plane again. The challenge is working out the vertical part while still in the top view. There's no way to change its elevation on the fly that I know of.
View 2 Replies View RelatedI want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedThe task should be similar to the _measure command but, I would like to divide the spline into lengths that I give in input. (Decided by user)
e.g. Length of spline: 10.000 meters
Place a block at length:
- 1238 m
- 2005 m
- 2018 m
- 2458 m
- 4098 m
and so on..
How I can do that? It would be perfect if it would be possible to give an excel file with the length values.
I want to find the cardinal points ( N, S, E, W) of each face of a closed polyline, how?
Windows 7 (x64)
AutoCAD 2012 (x64)
The surveyor's CAD file includes a boundary line that is mostly curves. It's drawn as a spline. I'm trying to create a PROPERTY LINE in Revit. I've converted the spline to a polyline in CAD. In Revit, PROPERTY LINE sketch mode, I can hghlight the polyline but can't select what I've highlights. Only one of the polylines gets selected. So I have to try to select them all one at a time. converting a spline to polyline in CAD for use in REVIT?
View 2 Replies View RelatedI have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedI went out with our GPS and shot each of our stock piles we have in our yard (recycle asphalt, 3/4" gravel, 1" gravel, etc.), and now I want to figure out how much of each pile we have
So what I did was create a seperate surface for each pile, then I created a volume surface for each as well and just set the base and compare surface as the existing, that wat was I can get the total sq ft of each pile, but now I want to figure out how much yards of material are in each pile
Would I need to set up a materials list for each on to calc how much are in each pile according to what type of material they are?
How can i convert a arc shaped spline to arc.? I need to get the radius of that spline. Is there any way to get the radius of arc shaped spline.?
View 5 Replies View Relatedhow to get the area of this polyline .........
i used properties command >>>
i used li command >>>
i used area then o command >>>> it says that area = 362.5350 ok this is wrong ..
i calculate the area of the polyline by separating it to parts then subtract the area >>> 368.62 - 7.79 = 360.83 this is the correct area
actually this is to hard to separate polyline to parts, when i have alot of polyline.
i guess this problem causes, when you have self-intersecting polylines the file is attached ..
Is there a way to calculate a (closed) 3D polyline area ?
View 8 Replies View RelatedCode to convert a spline or read its points so I can create a curved leader (with arrowhead) reasonably close ?
View 9 Replies View RelatedHow to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedThe attached profile is a section from a solid. I would like to create a closed profile in order to extrude the shape into a solid. The polyline command and splinedit don't seem to do the trick.
View 9 Replies View RelatedAutocad 2011 and 2011 LT both give the wrong area for sertain polylines. While Autocad 2005 gives the correct area.
Its terrifying how many official documents may be wrong because of this bug.
Presently the "AREA" of a closed polyline is in "sq-in" first, THEN "sq ft".
For everything I do, and likely others, I need sq ft - without having to waste time and roll my cursor over the results.
Is there ANY way to change this default to have sq ft FIRST!??
I was wondering if there is a settings for the displayed values in a polyline's properties. Such as area. Normally it will display square feet but I would like for it to also display acres. I know it a simple conversion, but over the course of a year or more it could save me alot of time.
View 2 Replies View RelatedHow can I extract text from polyline area. Ideally scaled by some factor (drawing in millimeters convert to area in meters).
I need to write a lot of areas of some room etc. into them and i want to know if there is another possibility than select polygon note the area and make text.
I'm unsing AutoCAD 2005 CZ.
I have linked my drawing to a database with text inside a closed polyline. Is there a way to have the area of the closed polyline stored in the database as a live area.
View 8 Replies View RelatedHow to list the area of a polyline or by points and have the output displayed in acres?
View 6 Replies View RelatedI'm using 3dsMax 2010.
I have created a big spline. When I tried to "Convert to poly", it doesn't work. Usually, as result, the spline appears with a filled. In my case, the spline disappears. I thought it might be because the spline is not closed, but it is correct.
I have an irregular shaped polyline in civil 3d that needs to be 31.5 acres. It is currently 32.8 acres. Without manually rescaling this polyline over and over again in order to achieve a polyline that represents 31.5 acres, can Civil 3D automatically draw the polyline to represent 31.5 acres for me?
View 9 Replies View RelatedI have a closed polyline that i can add the area to via a field in mtext using the options under area. I would like the area to always be rounded down to the nearest square meter. Is the a way to do this via the acfields.fdc file?
View 8 Replies View Related