Im using autocad lt 2004. My plotter does not recognize splines, and I would like to convert them to a polyline. How to do this, been trying to do if for a few days now but to no good.
when I highlight the spline it will not give me a option to turn the spline into a pline.
Due to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
I have one drawing but this is Spline but i want to convert it into polyline. without tracing it. i attach my dwg file with this massage.
View 9 Replies View RelatedHow can I convert Spline to Polyline.
View 9 Replies View RelatedI am a student and I am trying to transform a spline into a polyline with the AutoCAD 2009 that with have at Uni for the CNC machine but "pedit" doesn't work.
View 2 Replies View RelatedI have three contiguous splines. I'd like to make them one continuous entity, either spline or polyline. How do I do?
I've gone to Modify/Object/Spline and to Modify/Object/Polyline and neither seem to work.
I need to draw a polyline (or spline) in the XY-plane, followed by a vertical segment before continuing in the XY-plane again. The challenge is working out the vertical part while still in the top view. There's no way to change its elevation on the fly that I know of.
View 2 Replies View RelatedOur customer send us drawing with ellipse into.With Autocad 2008 I bought a plug-in call SplineConvert that did the job perfectly but not compatible with 2013.
Is there any plugin that could replace that tool ?
Is there any standard ACAD command that could easily do this Job ?
I need a way to make 2 or 3 times per week this converting on all ellipses of large and detail 2D drawings so no time to offset in and out all those .
I try also DXFOUT in R12 but all the spline are being converted into 3d polyline making a huge files that froze my PC.
I also try FLATTEN but did not see how it work , the ellipse stay an ellipse.
I would like to convert a spline to a polyline for the sole purpose of finding the area. Is there a way to do this or is there another way to find the area of a spline? Typing list does not give me the area.
View 9 Replies View RelatedThe task should be similar to the _measure command but, I would like to divide the spline into lengths that I give in input. (Decided by user)
e.g. Length of spline: 10.000 meters
Place a block at length:
- 1238 m
- 2005 m
- 2018 m
- 2458 m
- 4098 m
and so on..
How I can do that? It would be perfect if it would be possible to give an excel file with the length values.
Our customer send us drawing with ellipse segments into.
With Autocad 2008 I bought a plug-in call SplineConvert that did the job perfectly but not compatible with 2013.
Is there any plugin that could replace that tool ?
Is there any standard ACAD command that could easily do this Job ?
I need a way to make 2 or 3 times per week this converting on all ellipses of large and detail 2D drawings so no time to offset in and out all those .
I try also DXFOUT in R12 but all the spline are being converted into 3d polyline making a huge files that froze my PC.
I also try FLATTEN but did not see how it work , the ellipse stay an ellipse.
The surveyor's CAD file includes a boundary line that is mostly curves. It's drawn as a spline. I'm trying to create a PROPERTY LINE in Revit. I've converted the spline to a polyline in CAD. In Revit, PROPERTY LINE sketch mode, I can hghlight the polyline but can't select what I've highlights. Only one of the polylines gets selected. So I have to try to select them all one at a time. converting a spline to polyline in CAD for use in REVIT?
View 2 Replies View RelatedThe attached profile is a section from a solid. I would like to create a closed profile in order to extrude the shape into a solid. The polyline command and splinedit don't seem to do the trick.
View 9 Replies View RelatedI'm trying to make some 3d spline gears in autocad, I start by generating them in eMachineshop then importing into autocad, this works fine but the gear is imported as seperat lines so I can't extrude them, i also cant join the lines because after zooming in there are quite a few gaps. How I can join the lines together without manually connecting the dots? I'll include a copy of the gear, eMachineshop only outputs dxf files as far as i know.
View 3 Replies View RelatedI'm trying to create an external involute spline (ANSI B92.2M) Fillet Root Side Fit 26.9mm x 1 mm x 26 teeth x 38 mm long using the spline generator with Inventor 2012. I created a test shaft"M-182-AMA.ipt" that is Ø26.9 mm x 38 mm long with 1 mm radius on each end of shaft.
I use the following steps:
1. After creating component "M-182-AMA.ipt" I select Design tab>>Power Transmission>>Involute Spline.
2. A window appears that has the caption "Involute Splines Connection Generator".In the Dimensions section I choose "Splines Type: ANSI B92.2M - 37.5 deg, Fillet Root, Side Fit, 26 x 1.00 x 38 x 5H/5h" and change the Length to 38 mm.
3. In the Shaft Groove section I use Create new, and I push the Reference 1 button that turns blue, I then select the od feature from the model and I get an error(see attached pic "error1.jpg).
I changed the 26.9mm od to be 27mm and it still gave me the error.
Work Station : Dell Precision R5400
OS: Windows 7 Business 64 Version 6.1.7601 Service Pack 1 Build 7601
Processor Intel(R) Xeon(R) CPU E5405 @ 2.00GHz, 1995 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A10, 4/30/2012
Graphics Display Card: ATI FirePro V4800 (FireGL V) 1.00 GB Adapter RAM
Computer Memory: 8 GB ECC RAM
Im trying to subtract a 3D spline from a wall to make a archway. Both are editable polys. When I subtract the 3D spline from the wall using boolean operations It shows the wall as hollow, normally this doesn't happen when I subtract other objects from the wall so what I need to do. I tried looking at existing threads but the only suggestion is collapse the stacks, something that is already done.
Attached are two images showing the problem.
I've been trying to make gimp-curves-spline get variable (which is number)instead of number and I get error.
For example -when I do:
*(gimp-curves-spline drawable 0 6 #(0 0 0 15 255 255))*
everything works well as it should be.
but if I do:*(define spoint 15)*
*(gimp-curves-spline drawable 0 6 #(0 0 0 spoint 255 255))*
I get an error: *Error: Item 4 in vector is not a number (argument 4 forfunction gimp-curves-spline) #( 0 0 0 spoint 255 255 )*As you can see, all I did was replacing the number 15 with a variable(which is a number) I also check it is a number by the *number?* type predicate
I have some text that I put on a sine-wave path using the PathDeform modifier. Is there some way to make that shape permanent, independent of the sine-wave spline? The DeformPath mod won't collapse on the stack.
View 9 Replies View Relatedis it possible to make text as polyline, so you can extrude the letters ?
View 2 Replies View RelatedHow i turn a 3D Polyline into an Alignment so i can apply an assembly to it and create a RXL?
View 9 Replies View RelatedI am wanting to make a grip that slides along a polyline. Similar to the diamond shaped grips used in Civil3d to slide along alignments and pipe objects to pick stations and insert labels. How this can be done in .net.
View 5 Replies View RelatedSo the problem I am having is when I try join lines and/or make a polyline. I am trying to model an electron lens and have all the measurement and angles correct but Autocad does not want to allow me to join the lines so that I can make a 3D model for export. When it does allow me to join all the line or make a polyline, the lines are not straight. Granted I have to zoom in to see the deviation in the line but my connecting lines are not orthogonal like they should be. Here is a picture of what I am trying to make.
The main problem area is the gray part three electrode 1.2.pdf (Don't know if you can see my attachment)
three electrode 1.2.dwg
About 6 years ago some people in the Land Desktop group were complaining about not being able to move the text in a linetype so as not to obscure other entities.
how I went about it and a drawing showing an example. Drawing is 2012.
I don't say this is going to replace linetype. I'm also going to see if there's a better way of doing this with Civil Objects. But I've wanted to figure this out for a while and had some down time today. So this is for you to play with if you want. I was looking at my Undocumented Commands file and that reminded me of it since this done with un(or little)documented commands.
If you open the drawing. Select one of the magenta circles (nodes) in the center of the text to activate grips. Select a triangular grip and use it to slide the text along the polyline.
How are normal lines joined together to make one poly line? Learning on Auto CAD 2010.
View 4 Replies View RelatedIn our office cutlines are made up of polylines. When I use this in an annotative drawing I cannot get the polyline to change with the scale factor. Is there a way to make the polyline annotative?
View 4 Replies View Relatedis it possible to make a wipeout but with a polyline that has arcs?
View 8 Replies View RelatedHow do I solve this problem I cannot join basic lines to make a closed polyline as they will not join together. So i tried to use the flatten command which does not work and out puts error below:-
Command Prompt Input/ouput
Command: FLATTEN
Select objects to convert to 2d...8 found
Remove hidden lines? <No>:
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
A vertex was added to a 2D pline (0) which had only one vertex.
Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedI would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedI've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View Related