AutoCad :: Dynamic Block Scale And Mirror?
Apr 18, 2011
On some of my blocks i have started using quiet a few parameters, Although i have noticed on the blocks that have scale and flip, it goes wrong. is there a way i can get the flip parameter to follow the center of the block after scaling?
similar with a block of a door in plan, i have got the rotate working, and the scale to fit the door opening, but if i rotate first the scale parameter don't follow the rotation of the door making it difficult to then scale the block from the using the block parameters!
View 9 Replies
ADVERTISEMENT
Jul 27, 2011
I am looking to create a dynamic block that changes in scale, ex. If I have two (2) viewports in paper space, one 1/4"=1'-0" the other 1/8"=1'-0" I want my blocks to appear to be the same size in paper space.
Also, I would like my blocks to change attributes/features ex. If I have a "light switch block" I would like to have the option of switching the block from a 3-way switch, 4-way switch etc.
View 4 Replies
View Related
May 20, 2013
have an imperial graphic scale dynamic block that they wouldn't mind sharing?
View 4 Replies
View Related
Apr 17, 2013
I am attaching my dynamic block that I am having difficulty finalizing. My goal is to be able to stretch or resize the hvac block, based on the size that is provided to me (ala 24x24, 36x36, 48x72, etc) (Stretch Action), I have that figured out, and I have the symbol in the center that stays centered as the block size changes, (Move Action).
Here is my problem, I want the symbol in the center to stay centered and scale based on a ratio as the overall size gets larger. So for example: if my size is a 24"x24" I want the symbol in the center to be approx 12" dia, but if the size gets up to say 60"x60" I want it to scale accordingly (so it could be like 48" dia), specifically maintaining the size based on the x axis, so if the it gets to a 60x72", I'd like it to still be centered but size according to the 60 width, and not stretch and look awkward. I want the center symbol to scale and stay centered in the rectangle as I scale the size.
View 7 Replies
View Related
Sep 10, 2013
we have a rectangle 0,0 - 200,100 with a triangle inside 0,0 - 100,100 - 200,0
[/] <- for example
A dynamic stretch action is applied to the x of the rectangle, how do you scale/stretch the triangle with the rectangle and only on the x axis, so the triangle remains symmetrical from the middle of the rectangle on the y axis even when the rectangle is stretched?
Looking for a solution that doesn't involve inserting the block and scaling?
View 5 Replies
View Related
Apr 11, 2013
I have this simple dynamic block that is to change from 4" to 6" to 8" square. I have a linear parameter, 0 grips, and a Lookup function for 4, 6 or 8. It is supposed to scale about the midpoint (insertion point). I have tried both the Midpoint and Startpoint settings for Base Location but it always seems to scale from the far left of the Linear Parameter.
using 2012 LT
View 2 Replies
View Related
Apr 25, 2013
I am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
View 3 Replies
View Related
Jun 3, 2013
I have a block that I want to show on a vertical exaggeration of 10x. How do I make it so that a block has a Y scale of 10 without the attribute text inside the block being stretched in the Y direction 10x?
I would like to use a Y scale of 10 rather than a block with 10x the length because I have a field that returns a length parameter and I don't want that value to be 10x what it's supposed to be, and it would make things much easier to not have to multiply my values by 10x each time I use the block.
View 1 Replies
View Related
Dec 16, 2010
How to change the Scale Uniformly property in dynamic blocks accross hundreds of drawings using either/or scripts, lisp, vba or anything else that might do the job.
I just need to open the drawing and select the block (one block per drawing) then edit the scale uniformly property within the block, save then close the drawing and move onto the next drawing.
View 4 Replies
View Related
Sep 27, 2013
Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
View 6 Replies
View Related
Aug 9, 2012
I've spent a day and a half coming up with a way to make this dynamic damper block work. Now, I need to fig out how to get every other blade to rotate 90°. I have attached a file with my block and an example of what I need to make it do. I’m running AUTOCAD 2009 LT if you need to know.
View 2 Replies
View Related
Sep 20, 2013
1. What is the easiest way to find points that are not constrained? I get a notice that the block is not fully constrained and its a nightmare going through all the lines trying to find where I need to apply a constarinet.( I can't wait to get off ACAD and back to Inventor.)
2. When I try to save a dynamic block using the Save Block icon under Open/Save, if the dynamic block is not fully constrained, and I click save, when I reopen the block to edit all of my constraints are gone, this has happened twice. Now I just exit by Xing out and saving changes.
View 2 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Nov 7, 2011
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
View 4 Replies
View Related
Mar 26, 2012
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
View 4 Replies
View Related
Jul 16, 2010
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
View 9 Replies
View Related
Sep 18, 2013
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
View 1 Replies
View Related
Feb 4, 2011
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
View 9 Replies
View Related
May 16, 2012
If you can mirror a block without mirroring the text within? I tried the mirror text variable and it did not effect the way the block was mirrored.
View 4 Replies
View Related
Mar 1, 2013
I would like to create a "wave" dynamic block, see below...
It is made from wipeout.
Is it chance to make a similar?
If I make a list for the length (from 125 to 350), after can I make a table /list /summary where these size are shown?
View 9 Replies
View Related
Jun 27, 2013
Why the drawing title in my dynamic block will not scale up or down. The rest of the objects scale properly but just this the drawing title text attribute will not follow suit.
I tried adding position point and link, etc....I run out options and don't know how to fix this.
LT 2012 user
AutoCAD LT 2012
Windows 7 - 64 bit
View 3 Replies
View Related
Nov 15, 2012
I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).
View 9 Replies
View Related
May 29, 2013
I am creating a dynamic block of a conveyor belt it has a set number of widths and needs to be stretchable in length, which I have managed to do. The motor is placed half way down the length of the conveyor and needs to stay centered
I know I need to use the move command and put in a factor of 0.5 somewhere, but I can't remember how to do it.
View 6 Replies
View Related
Jan 4, 2014
I have a drawing with dimensions. Now, I want create Dynamic Block Controlling Visibility with dimensions in drawing with name dimension.
LT-don-TD LT-Kdoc-TD LT-Kngang-TDLT-don-thay LT-Kdoc-thay LT-Kngang-thayLT-don-moi LT-Kdoc-moi LT-Kngang-moiH-don-TD H-Kdoc-TD H-Kngang-TDH-don-thay H-Kdoc-thay H-Kngang-thayH-don-moi H-Kdoc-moi H-Kngang-moi
Then, I use command DAL; I can select dimension want use.
View 8 Replies
View Related
Jul 4, 2013
How do I stretch a hatch in dynamic block? It does not seem to work if I select the hatch along with other lines of a counter block.
View 2 Replies
View Related
Mar 5, 2012
I have an X centered as my insertion point.
When I stretch the dynamic block for a larger area the X stretches but into the next single box but not centered within the double space.
how to get the X to be centered in the box when it is enlarged to a double or triple size?
View 3 Replies
View Related
