When I try to draw a line at an angle I start by clicking shift and @ and when I take my finger off shift key I find it dissappears from the command ribbon and this comes up Point or option keyword required. I also get what appears to be a small envelope at the curser and then as I take my finger off the shift key it dissappears and thats when message comes up.
View 9 RepliesEach time an @ is entered at the command line, C3D is freezing for up to 15 seconds before allowing the comand to continue. It wasn't happening last week and no changes have been made to the instalation. What could be causing this glitch?
View 1 Replies View RelatedDoes relative coordinate entry work for multileaders? I would like to keep all of my leaders consistent and neat but other than using ost I cannot figure out a way to make them all line up. I would like to use coordinate entry if I could, maybe I am doing things in the wrong order?
View 8 Replies View Relatedhow create coordinate grid on layout in Civil 3D 2010-2011, such as this
View 9 Replies View Relatedi want change the grid coordinate to ground on civil 3d 2011,but i can.t find it
View 3 Replies View RelatedI'm running WinXP SP3. I just upgraded from CS2 to CS4 (and yes, I installed the update.
I'm currently running 11.0.1).
Whenever I load photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Adobe Photoshop CS4: Photoshop.exe - Entry Point Not Found" "The procedure entry point
Is ThreadDesktop Composited could not be located in the dynamic link library USER32.dll." After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly. No other errors, no missing functions, no lag.
I'm pretty sure getting an error during start up is a good indication that not everything is 100%.
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies View Relatedhow do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies View RelatedI want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
I'm trying to add to a right click menu for an Inventor addin using C#. I'm basing mine off of a VB sample. However, it appears VB allows the add command to be missing values, whereas C# will not allow any empty values.The 3 commas in a row are where the error occurs. C# error is simple "argument missing".
ControlDefinitions controlDefs = m_inventorApplication.CommandManager.ControlDefinitions; ButtonDefinition m_featureCountButtonDef = controlDefs.AddButtonDefinition("Add symbol", "symbolAddition", CommandTypesEnum.kQueryOnlyCmdType, "{DFJMQC00-938F-11E1-AFAA-.
[code]....
Using Acad release 12. Have there been any fixes to direct entry. Draw a 3d 6" cube. On the top surface draw a 2" line from a corner by moving your curser in the direction you wish to go, direct enter 2". It will be a 3" line. Move with direct entry also does not work when placing an object on an object.
View 7 Replies View RelatedNot sure why this has happened but all of a sudden, my AutoCAD 2013 install is reporting an issue with the "Entry Point Not Found"...
The procedure entry point ?bmpout@@YAXPEB_WH@Z could not be located in the dynamic link library accore.dll.
I'm hoping this isnt related to the Windows OS which is Windows 7, 64 Bit but i do recall some updates being rolled out recently which caused problems with ESRI products...
I am using Inventor 2012. I want to put a label with a prompted entry. So I did this,
SCALE: <scale>
However, when filling out the symbol it only puts in the scale without the label. The reason I am doing this is because my text is right justified and I need the label to move with the text.
I have a section of code (see below) which runs a program which highlights a part/subassembly red, then gives the user a list dialgue box in order to easily replace the compent. At present, I have this code repeated for each part/subassembly in my main assemby (i.e. FRAME, POWER_RISER, BUSBAR_CHAMBER, BUSBAR_ASSEMBLY...).
Having the code repeated multiple times, means it is very time consuming to modify. I want to be able to generate a list then have the code below, run for each of the entries in the list. So I need something along the lines of
dim mylist as something
mylist = FRAME, POWER_RISER, BUSBAR_CHAMBER, BUSBAR_ASSEMBLY...
FOR each entry in mylist
run all the code below (with the words 'BUSBAR_ASSEMBLY' replaced with 'mylist'
END
[Code] ........
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
I'd like the option of manually entering information in one column of my point table. I can see how to create a blank column with a title, but how do I edit those cells?
In my particular case I use a point label style in my drawing that contains "Full Description": "PK8", for example. This works great for displaying my point in the drawing - I DO want the number to appear - but when I want to see it in a table, I just want to see 'PK' in a Description column, next to the (obligatory) 'Point Number' column. Having the Description column read 'PK8' next to the point number is redundant. I don't see how I can get this in automatically
In block attribute manager i can see the number of instances of the selected block in the current drawing. Can I set this value in the field?
View 4 Replies View RelatedI am going to be saving a template with one of my custom frame profiles from the content center already placed in it. I'll place it say 100" long, just an arbitrary number. How can I create a dialogue that pops up when I open the template file, it asks me for the value of 3 variables, then changes the length of my content center frame rail to the sum of those 3 variables? I've seen pop-ups before and know how to set the rule, I'm just not sure how to change the parameters..
View 5 Replies View RelatedThe only thing that has changed since Friday is the install of SP1. I use the old dialog boxes instead of the mini-toolbars (don't get me wound up). I just noticed yesterday some strange behavior when I change the value in the dialog box.
In the example in the attached screenshots, I started the fillet command and selected edges. The default fillet was ".3" and I want to change to ".4375". As you can see in the image, at one point while typing, Inventor decided to highlight the entry again, and as you see overwrote the ".4" with "375".
I'm checking other dialog boxes now but so far all I know is the fillet dialog box. Also does it on the value of a variable fillet too.
Inventor 2012 Pro, Windows 7, 64bit
Intel® Xeon® Processor W3580 (8M Cache, 3.33 GHz)
12 GB DDR3, NVIDIA Quadro FX 3800
I am trying to add an entry point to a retention pond that was created by grading tools. I will to entry point to be shaped like a trapezoid. I also want to grade a entry point to the slope of pond to control water erosion.
I have been trying to add the entry point for days.
I use a CommandManager.Pick command to select my drawing view and i want to put information of this view to a prompted entry in my sketched symbols, i have many same symbols in my page and i want to put a different description for each symblos but with a same prompted entry name, ex.: <NAME>
View 7 Replies View RelatedI'd like to make it so that a user may add a button for my addin by only having to modify an xml entry.
None of the values (name, descrip, tooltip) are null, and reading from the xml is working properly. Each internal name is unique. Why this code would result in an error? The error message is attached.
If there's a known way to dynamically add buttons(in a loop), I'd be happy to use an established method as well.
Element[] QueryArray = query.ToArray();foreach (XElement item in QueryArray){string name = item.Attribute("Name").Value;string descrip = item.Attribute("Description").Value;string tooltip = item.Attribute("Tooltip").Value;tempButton = null;tempButton = oControlDefinitions.AddButtonDefinition(name, name, CommandTypesEnum.kEditMaskCmdType, m_AddinClientID, descrip, tooltip, Type.Missing, Type.Missing);oStandardsLinks.CommandControls.AddButton(tempButton);}
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
In our idw's we have a parameter that is passed from the part to the idw parts list. When we/I edit the length of a part, notice how the entry for "Cutlength" is jogged down a little. To get this back to the correct position, I have to grab the parts list and move it a little. The text jumps to where its supposed to be. Any futher edits to the length of the part does not cause this again. Have never seen anything like this before 2013.
View 6 Replies View Relatedhave default text for a Prompted Entry in a Border. I have not found a way to do this other than creating a custom iProperty, which is not an option, since it is not our title block / border.
View 9 Replies View RelatedHow can I determine what was selected in the pop-up box and then using that for 1 of 2 things, either 1) Turn off the Edit Box for Hole Spacing if the selected option is 1(which would be value = "0" of the popup list) or 2) Making the portion where it confirms that the Hole Spacing Edit Box is filled out so that if the Pop-up List displays 1, it doesn't check the Hole Spacing Box. Below is the DCL and LISP that I'm currently using.
Here is my current DCL:
questions :dialog {label = "Information for Program";: row {: column {: boxed_radio_row {key = "Galv";label = "Galv Slot Required?";: radio_button {key = "Y"; label = "Yes"; value = "1";}: radio_button {key = "N"; label = "No";}}: boxed_radio_row {key = "Bevel";label = "Is Leg to Face
[Code].....
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
I'm trying to set up some new title blocks, I have some "prompted entry" Properties that I want to incorporate, I've got them in the title blocks OK but I can't seem to get em to return a default value, the prompts are all coming in blank when the dialog box comes up. I have set the defaults to what I need on the original ANSI template with the new title block, but when I create a new drawing using that template, the title block comes in without any values set. Is there a way of setting them to return a default value initially that you would change if required, I'm sure I'm missing something very basic!!
Also, in the 'edit property' fields dialog box, there does not seem to be a way of inserting symbols into the value field, have I not turned on the right variable, or missed have I something else??
I have been attempting to automate some prompted entry (PE) values using iLogic and the SetPromptResultText command.
The command works on the customer-supplied template I have if I create a new PE called <DELETEME> - my code also works on this new PE even if I delete the "<" & ">" from either end of the string so it becomes "DELETEME".
The command doesn't work on the customer supplied fields of "PURPOSE OF ISSUE" & "PROJECT REF No" but if I add < & > to either end (so they become "<PROJECT REF No>" & "<PURPOSE OF ISSUE>" respectively) and modify my code to look for that instead, lo and behold it works.
why it works with the "<" & ">" on the ends of the string but not without?
My guess is that the "<" & ">" allow the PE to have spaces and without it Inventor 2013 throws the dummy in the dirt and refuses to play nice! - Just tested that theory and it's clearly cobblers.
Here's the sub-routine I wrote (with the working "<" & ">" still in place):
Sub UpdatePromptedEntries(oDoc As DrawingDocument)'assumes the oDoc is activatedDim oPromptEntryDim actSheet As Sheet = ThisApplication.ActiveDocument.ActiveSheet'For Each oSheet In ThisApplication.ActiveDocument.SheetsFor Each oSheet In
[code]........
When creating a title block I use iProperties and Prompted entry.
Now I want to place all entries and properties in a form so that I have everything together.
With the iProperties it works because you can select the iproperties when you create the form but I can not select the prompted entry to place in the form
Is there a way to select the prompted entry to place in the form?
Is it possible to write multiple prompted entry fields down in a single pass? As it is now, you can see the taskbar reporting as it writes down each line.
Essentially i've got 6 different fields i'm trying to write down using code like shown below:
If oTB.GetResultText(oTitleBox1) <> Me.Title1.Value Then Call ThisApplication.ActiveDocument.ActiveSheet.TitleBlock.SetPromptResultText(oTitleBox1, Title1.Value)End IfIf oTB.GetResultText(oTitleBox2) <> Me.Title2.Value Then Call oTB.SetPromptResultText(oTitleBox2, Title2.Value)End If
Just wondering if there's a way it can be written down in a single pass to save time or if it's a limitation of prompted entry text.
Product: AutoCAD 2014
OS: Windows 7 64bit
First I will state that everything within the program, to my knowledge, works just fine. Although..
I'm having a really strange issue when I try to type a command. It's an intermittent problem that occurs very often and can be extremely frustrating.
If I try to type a command, i.e.. M followed by enter to move an object, often times the command will repeat "MMMMMMMMMMMMMMMMM" and the command entry will fail. This happens for every button I press too. Letters, numbers, and even the Enter key will be repeatedly entered into the command prompt. Often times I've already pressed enter to execute the command. During this process the whole program seems to freeze, but not for too long. So I often have to enter the command multiple times, regardless of which button is repeating itself.
The repeating of a keystroke only lasts between 1-2 seconds but as I said has a very frequent occurrence.
I'm almost positive that this has nothing to do with my keyboard, as I've never experienced this kind of problem elsewhere. This is my machine at work and I've never encountered an issue as frustrating at this. Could it be something that my machine is doing?
i need any lisp that perform the Lengthen command from both side of Polyline by Digits Entry.
View 7 Replies View Related Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.