AutoCAD Visual LISP / AutoLISP :: Length From Both Side By Digit Entry?
Sep 5, 2012i need any lisp that perform the Lengthen command from both side of Polyline by Digits Entry.
View 7 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Change Length To Match Length
May 24, 2002Command to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Confirming Entry With Pop-up List In DCL?
Aug 15, 2011How can I determine what was selected in the pop-up box and then using that for 1 of 2 things, either 1) Turn off the Edit Box for Hole Spacing if the selected option is 1(which would be value = "0" of the popup list) or 2) Making the portion where it confirms that the Hole Spacing Edit Box is filled out so that if the Pop-up List displays 1, it doesn't check the Hole Spacing Box. Below is the DCL and LISP that I'm currently using.
Here is my current DCL:
questions :dialog {label = "Information for Program";: row {: column {: boxed_radio_row {key = "Galv";label = "Galv Slot Required?";: radio_button {key = "Y"; label = "Yes"; value = "1";}: radio_button {key = "N"; label = "No";}}: boxed_radio_row {key = "Bevel";label = "Is Leg to Face
[Code].....
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
AutoCAD Visual LISP / AutoLISP :: Retrieving Entry From Entity Association List
Nov 13, 2013presuming I have a selection set of different entities, that might have different linewight.
The code that is responsible for this property is 370
370Lineweight enum value. Stored and moved around as a 16-bit integer.not omitted from here
I need to make all of the entities have the same layer, and to make sure the each entity has the "ByLayer" lineweight.
The problem that I encountered, is the lineweight changement.
This is the colution that I came with, but it doesn't work for me:
(defun c:test () (setq en (car (entsel))) (setq el (entget en)) (setq el1 '()) (setq indx -1) (repeat (length el) (setq indx (1+ indx)) (if (/= (nth indx el) (assoc 370 el)) (setq el1 (cons (nth indx el) el1)) ) ) (setq el el1) (entmod el) (princ) )
Having tested it in different ways, it looks like at the end, el1 represents the association list that I want my object to have, but it doesn't want to update.
AutoCAD Visual LISP / AutoLISP :: Changing Layer Settings From A Sheet Set Entry
Sep 26, 2013for my latest little project I'm trying to change layer settings depending on a entry in a sheet set attribute.
Basically, if the sheet set custom attribute entry is 'white' I want the colour of a specific layer displayed as 255,255,255, and if it's blue I want it changed to 0,0,255. So I can control the colours from a sheet set custom properties level.
And for it to check if the layer existing in the drawing, so it'll skip the process if it's not there.
AutoCAD Visual LISP / AutoLISP :: Getstring / Getint Digits / Characters Entry Limit?
Aug 26, 2013I have been searching all over and have not found a method for limiting the number of digits/characters a user can enter for a getstring or getint prompt.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Line Length To Attribute Tag
Sep 30, 2013Is there any simple code for to sum length of lines which is i am choosing and copying result to chosen attribute tag ?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Line Length Report
May 30, 2013I am trying to create a report of line lengths based on linetype.
I have built a list that looks like this...
(("CUT4SS" . 859.566) ("CUT4SS" . 862.231) ("CUT4SS" . 927.651) ("CUT6SS" . 1158.48) ("CUT6SS" . 509.903) ("CUT6SS" . 2840.31) ("CUT4SS" . 967.76) ("CUT4SS" . 508.73) ("CUT4SS" . 111.065) ("CUT4SS" . 483.216))
I want to take this list and create a function to create a list of total lengths i.e. the CDR's.
(("CUT6SS" .total length)("CUT4SS" . total length))
AutoCAD Visual LISP / AutoLISP :: Retrieve Arc Length From Revision Cloud?
Oct 28, 2011Is there any way to retrieve the arc length from Revision cloud and how can we identify that object is a Revision Cloud.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: DCL Radio Button Label Length
Jun 28, 2013I am trying to revise an old dialog box so that I can add some new options but I'm finding it difficult to shorten the label for a radio button enough to get the box width to look reasonable. I read somewhere that Windows fonts cause the label lengths to hold extra space for each character. The webpage that I found this on said the solution was to make a new line for the label, which sounded great to me, but they did not tell how to do it. After much searching, I figured out how to add an additional line to the label, but my program now refuses to function correctly. I set the middle button before initiating the dialog in my lisp, but when I select a different option, the original button remains selected along with the user's choice. The program actually works, using the last button selected, but I really want the button to respect the pick by the user and deselect the default button.
This worked perfectly when I had only two selections, and it still worked perfectly when I added the third option, but it just doesn't like it when I try to add a new line for the long description in the middle of a radio column.
I'm barely functional with dialog boxes..
DCL in question:
:boxed_radio_column { label = "Location"; width = 20; height = 2; fixed_width = true; fixed_height = true; alignment = top; :radio_button{key = "sl-AD"; label = "Spring Lake Applications";} :text_part{label = " and Distributor Services";} :radio_button{key = "sl-BP"; label = "Spring Lake BP Systems";} :radio_button{key = "gr"; label = "Grand Rapids";} }
lisp has the following in this order:
load dialog - I have a loading function that works fine
(set_tile"sl-BP""1")
(action_tile"sl-AD" "(TGW-Setup_01 $key)")
(action_tile"sl-BP" "(TGW-Setup_01 $key)")
[Code] .....
Of course, these are just the pertinent sections of a much larger setup dialog, but I didn't think I needed to post all the functions that this program is doing, since you'd have a difficult time running this without my templates, printers and a number of support files.
Like I said, it seems to be choking on my adding :text_part { Label = " and Distributor Services";} instead of making this a single line of the label for the button above it.
Why does this cause the default radio button to stop releasing?
AutoCAD Visual LISP / AutoLISP :: Centerline Along Length Of 3D Solid Shape?
Dec 10, 2013Lisp to draw a line along the length of a 3d solid? I have some UB (I sections) columns and beams modeled and would like to select all solids and for it draw a centerline end to end
View 7 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: List Total Length Of Polylines
Jul 30, 2012where I can obtain a freeware lisp routine that lists the lengths of all the polylines on a specific layer or within a selection set? I want to avoid list if possible as there are rather a lot of polylines!
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Line Length To Dimension Override?
Sep 23, 2011My goal is to be able to select a line and a dimension and then have the line's length appear as the text override for the dimension. I have the code to substitute the variable "dist" for the dimension text:
(setq dimselected (entsel "
Select Dimension:"))
(setq newlength dist)
(command "dimedit" "n" newlength dimselected "")
but am having problems extracting the line's length to the variable and setting setting it equal to the variable. To make things more interesting, the value needs to be in inches with fractional inches accurate to 1/16".
AutoCAD Visual LISP / AutoLISP :: Put Circle To Line After Specific Length
Oct 3, 2013I need a lisp which is i can draw a line or pline with circle in every 30 meters ( circle diameter and total line or pline length will be optional )
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Delete Lines Shorter Than Specify Length
Nov 8, 2002Is there any utilities that can select the entire drawing with the 2d polyline and erase all the polyline less than specify length (eg:10m,20m etc) ?
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Length / Width Output Of Rectangle
Nov 26, 2013I found a lisp in the net to create a rectangle by marking objects in a draw.
But it would nice to get at the end of the lisp after creating the rectangle a output in the command line about the length and with of the created rectangle.
who can add the code for the length/width output?
(defun C:wer (/ AUSWAHL INDEX ELEM XYMIN XYMAX MINX MAXX MINY MAXY DATA A) (vl-load-com) (if(and(or (and (setq AUSWAHL (ssget "I")) (> (sslength AUSWAHL) 0)) (and (setq AUSWAHL (ssget)) (> (sslength AUSWAHL) 0)) ) (or(setq A (getreal "
Randabstand <0> : ")) (setq A 0.0) ) ) (progn (setq INDEX -1) (repeat
[code]........
AutoCAD Visual LISP / AutoLISP :: Pause For Certain Length Of Time 5 / 10 Seconds
Jun 9, 2012How do I pause for a certain length of time 5 seconds or 10 seconds.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Retrieve Length Value Of Single Entity
Feb 27, 2012When we launch the list command, the Area system variable holds the area value of the selected shape.
How to get the length value into an Autolisp program to use it?
AutoCAD Visual LISP / AutoLISP :: Code Sum Lines Length / Multiplied By Constant
Aug 6, 2013I have lisp code, which count total length, but I need that it count and multiply by constant which I choose manual (such as in example, total lines yellow length * y + total blue lines * x = ... , example 50*2 + 60 * 3=280),
remember the another code, such as I have d200 with total l=1000 and d250 with total l=1500, i need to count total cost such as 1000*y+1500*x
one think, diameters numbers is not only 1 or 2, it can be many different diameters.
dwg file here:
[URL]..........
lisp file here:
[URL]........
AutoCAD Visual LISP / AutoLISP :: Adjust Column Width To Length Of Text
Apr 27, 2012Several times, we generate a drawing, and the text widths in the columns vary greatly. Some have text that is ten characters long, and others have thirty-plus characters.
Is there a way to be able to select the table (or perform the command to all tables in the current layout) and have each of the columns expand to the appropriate width, that depends on the longest string of text in that column, for each column. The problem I see, is that some tables have two columns, some have six, and of course other with any number in between. The same is also true for the amount of rows.
AutoCAD Visual LISP / AutoLISP :: Existing Text To Keyboard Entry Text
Jun 21, 2012 I have two attributes "REVN" and "REVD" in a block "ATT" that I would like to change (globally preferably) to the following.
(1) Existing text to keyboard entry text.
(2) Colour from existing to 10
I am a bit lost in the (command "-attdef" .......)
(defun c:atc ()
(setq rev (getstring "Please enter review"))
(setq dat (getstring "please enter date"))
(command "-attdef" .."ATT".."REVN"....."c" "10")..)
(command "-attdef" .."ATT".."REVD"....."c" "10")..)
)
AutoCAD Visual LISP / AutoLISP :: Reactor - How To Change Xdata Length If Line Is Modified
May 18, 2010I need a Reactor to Modify Xdata - Length - contained in Line Object if this Line is modified (stretched, breaked, trimmed, etc).The routine need to verify if Line contain Xdata and modify it (and works with multiple selection).
I tried for long hours, but without success. I tried to create a list of entities while the reactor is applied, but doing so need another reactor to change these entities after the first Reactor works.The codes I used are below:
{code}
;If it just 1 string only you want to add
(defun add_xdata_str (e a v);;;EName APPID String_value
(and (not (tblsearch "APPID" a))
(regapp a))
(and (= (type e) 'ENAME)
[code]....
AutoCAD Visual LISP / AutoLISP :: Total Length Of Selected Object And Summarize Them A Table
Jan 4, 2014I need a lisp file that can read the total length of selected object (lignes, polylines) and summarize them by layers or by color in a table
e.g
command:tl (total length)
select objects
found total length.......
select object (Ent)
total length or [Add/Subtract/Table] :
total length = .......
if table
Enter an option by [ Layer/Color/line Type/line Weight] <layer> :
AutoCAD Visual LISP / AutoLISP :: Count Dynamic Block Including Total Length?
Apr 2, 2012lisp to count dynamic block including total length.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Continuous Dimension Lisp That Alternate Its Position
Jul 12, 2012Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
AutoCAD Visual LISP / AutoLISP :: Add String To Each Item In List Using Lisp
Nov 14, 2013I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Opening Drawings With Default Visual Style Set To 2D Wireframe
Oct 7, 2013Is there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
AutoCAD Visual LISP / AutoLISP :: Write A Lisp Routine That Invoke The Mleader Command
Oct 11, 2012I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
AutoCAD Visual LISP / AutoLISP :: Visual Effect Settings?
Jun 20, 2013Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Combinations In DCL?
Sep 7, 2012Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
AutoCAD Visual LISP / AutoLISP :: Get Attribute Value
Jun 3, 2013I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View Related