I'm trying to use grid and snap to draw some piping with a certain spacing. However, the grids' position isn't exactly where I want it. I can't reposition the xref to make it fit either since its position is agreed upon by all project contributors. Can the grid position be adjusted in any way?
View 1 Replies
I have a 5x5 grid (think: Bingo card) and 25 layers that I want to randomize within it.
I've found "randomize layer order" scripts, but how would you randomize the layer positions within the grid to easily create unique cards?
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
I want to create some modules for a platform deck. The modules are made of C5x6.7 channels in one direction, L2x2x3/16 angle stiffeners in the other direction, and 3/16" deck plate on top.
My "drivable" parameters will be length and width.
The modules will all be different sizes, so I need to be able to have every instance of the assembly be different.
The workflow I was attempting to do before I got stuck was this:
1. Create a skeleton part (just a sketch) with Length and Width parameters.
2. Insert in an assembly and use frame generator to build the structural shapes (channels and angles)
3. Insert another part (the 3/16" plate) that can reference the length and width and adjust to be the correct module size.
Is there a way to make parts in an assembly all follow the same parameters? More importantly, can each instance of this assembly show up differently and be adjustable when I place these modules in my main assembly?
I don't know much about iParts - but it looks like an iPart lets you choose from predefined dimensions - I want something that I can custom input any size I need.
I am looking for samples of drawings that can be copied and adjusted to fit in my drawing. In particular I need a cross section of a roof terrace for a London house. Idea is that we are building a Juliette balcony out of a dormer window and want to see precisely how the resulting flat roof should be constructed.
View 2 Replies View RelatedWhen a Basic Tolerance is used to dimension - can the size of the containing box be adjusted?
I understand this is set as a percentage of the text size - where is this value & can it be edited?
When I copy a dynamic block, and then adjust one of the copies or the original, the other copies often get messed up/destroyed--odd shifts in the handles, lines moving out of kilter, etc.
Perhaps the following is the cause of the problem: when I copy a dynamic block, Autocad does not give the copy an original Anonymous Name. So I am left with a bunch of blocks with the same Anonymous Name. Perhaps this confuses Autocad.
I have a user and when he's in sketch mode he trys to draw a line but it keeps on snapping to a grid. Both snap and grid setting are switched off. I can't find any settings he has different from my own set-up so I'm finding it hard to fox this problem. FYI, this user is a bit of a problem and tends to change settings without even realising he's doing it.
He's using Inventor 2012.
When i pick points from the drawing using the ID command i recieve a long and meaningless coordinate which is useless to me when setting out. How i can rotate my drawing so that firstly its aligned with my grid and secondly give it the same coordinates as my site based local coordinated grid?
View 9 Replies View RelatedUnderstanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
I was working on some isometric drawings for my CAD class and I can't seem to figure out how to get the grid back to the standard 2D grid view that I used to get when opening CAD. I now jusr get this dotted grid every time:
[URL]...
When adjusting the tracking in cs6 the tracking value changes to a smaller value once applied. I rely heavily on this to work properly, are there any workarounds to this problem ?
(This became an issue after I 'upgraded' to the latest version, are they trying to get me over on CC by introducing more and more bugs to cs6?
Why do adjusted photos lose all their adjustments when moved to a final composite looking like the original ,jpg or worse? What's the secret here?
View 15 Replies View RelatedI know this is gonna be hard to believe after 4+ versions of LR, but, I just tried slideshow on the 4.4 RC and the timing issue which has been the bain of the slideshow module seems to have been adjusted. I have just tried 6-7 different slide shows, added music of various lengths, changed the fade durations, changed the type of music, source of music, and greatly varied lengths of music and it has actually worked in a manner that would be acceptable to view with a client in a face to face presentation. This includes using an intro and exit screen. I am using a mac with SnowLeopard. I will try this on a PC with Windows 7 Professional later today. You still can only use one soundtrack and make sure the sound track does not start or stop too abruptly, but what a big difference! I could not get it to mess up regardless of changes I made.
View 35 Replies View RelatedI can't see adjusted Camera Raw files on my iPad after syncing with iTunes.
View 1 Replies View RelatedI am unable to open a jpg as a jpg once it has been opened——and NOT adjusted--- in raw. either can I open it as a jpg from within CS5 where it selects it from the Finder. Am I missing something or is this just the way CS5 has been designed?
View 4 Replies View RelatedI like using Bridge to import my photos but also like to use LR5. After I organize and edit in camera raw I want to import (ADD) the adjusted photos into LR5. Problem is the adjustments dont import into LR. The original raw DNG is imported without the fixing that I did.
View 1 Replies View RelatedIs there an easy way to ensure that the position of attributes on a block match the position on another block?
I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.
Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.
Is this even possible?
color value of spot colors cannot be adjusted via javascript?
View 5 Replies View RelatedWhen I import CR2 files (Canon RAW) that have XMP files alongside them into my Lightroom 4 catalog, Lightroom correctly reads image adjustments from XMP files and assigns them as Develop settings for the newly imported photos. This is how I expected it to be. Lightroom assigns older process version to these files, as it should be.
One quick question I have though: once I imported all these CR2 files into my collection, is it safe to delete all those XMP sidecar files immediately? I assume that Lightroom stores all Develop settings in the catalog file at the moment of the import and that XMP sidecars are no longer necessary. Is that correct? Or do I have to enter the Develop mode with each imported file first, before deleting the XMP in order to make old settings to "stick"?
I am trying to create a website for my company. I am trying to make it an auto height adjusting website. How do I do that in CorelDraw 12? Also, what is the optimum pixel size that I should set to the page? Right now I have it at 1140 pixels x 900 pixels.
View 12 Replies View RelatedHow can I make available "Refine edge" when advised in (Elements 11 - Guided - Depth of field - Custom - Blur - that the "Command refine edge is not currently available" ??????
View 1 Replies View RelatedI have been trying to mess with and target "tints" via javascript but either I am not understanding something or it cant be targeted as I had hoped, so I am looking for direction and guidance. I have a spot color assigned in the color swatches palette, and have drawn a few boxes on the page using this spot swatch. I then try to alter the tint using JS code.
sel[i].tint = // whatever number
alert(sel[i].tint) // This alerts fine
The alert shows a change taking place but it never gets applied to the item, the actual item never gets changed. I know things are properly targeted as I can change other attributes fine. When I look in the JS documentation it just shows for when creating a new spot, not for ones that already exist on items, I cant seem to find an example otherwise.
Can tint be adjusted for items on the page that have a spot color applied?
Revit has a propensity to locate a lay-in ceiling grid with a grid intersection in the center of the room. You can use the alignment tool to align the grid with a wall. But I see no way to center a tile in a room. This is often a necessity in a narrow room, to keep the lights centered. Also, installers, when not given specific instructions to the contrary, will often locate the ceiling grid to minimize narrow tiles at the wall. We need more control over the position of the grid.
View 1 Replies View RelatedWhen using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
I have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
View 14 Replies View RelatedI'm looking for an option to adjust the grid size and to snap-to-grid.
For some purposes, you can find a way around this, but it is a pain when working on a project that requires perfect precision.
The topic has been brought up before, but I'm hoping to hear of any news on the possibility of implementing it. I don't assume there has been made any plugins to cater this need since earlier posts on the matter, so I'm hoping to persuade developers to implement the feature in a new version of paint.net instead.
If you need to know more specifically what I'm looking for, then it's basically what you have in Adobe Illustrator or any decent 3D modelling software you will ever come across. It would work pretty much exactly like the grid already in place, except you would not be limited to working only with individual pixels, but rather groups of pixels as you zoom further out. The grid would preferably have thicker lines every 5, 10 or 15 lines, etc. for user to position the various elements.
I'm using Paint.NET 3.5.8 on Windows 7 SP1 64-bit.
While editing small (16 x 16) images, I noticed that Paint.NET used a grid with a width of 2 pixels. Selection rectangles snap to this grid, as do paste operations.
How can I specify the grid width or disable this snap to grid effect altogether?
want to translate my vector illustrations to charts for cross stitch kits. Using the grid tool, but the lines aren't equally spaced? I have a 100cm x 100cm document at the moment, with 1 cm making a 'stitch'. I want a grid that is 100cm x 100cm, made up of 1cm x 1cm squares for simplicity. Then be able to print the design out on the grid.
View 4 Replies View RelatedI'm new in InDesign. How do I remove the purple grid that was already there when I made my document, WITHOUT removing ALL my grids?
View 5 Replies View RelatedExactly what the topic title says. My goal is to draw a custom map with pinpoint accuracy compared to what I envision it as. So, I want to use a grid that I can fill in the individual sections of to create this image, and then remove the grid afterwards when I finish, or at least make it completely invisible.
Is there anyway to accomplish that?
