I have been using Autocad 2002 for a long time. Over the years I have a drawing in which I save my special lines, blocks, north arrow, etc.
I have tried everything to make this file smaller, nothing works.
I have even coppied just 1 item and created a new drawing, pasted it in , purged, audited, wblocked and the file size stays around 3 mgs in size.
I have a video that is 2:20-long, so it is a bit longer than a DVD/DL (8.5GB) at full HQ. But, when I let X6 "make it fit", it seems to reduce it by almost 50%, making the DVD folders only 5.1GB. This really ruins the quality.
Is there any way I can either control the reduction or tell it to leave the output alone when writing to hard-drive/DVD folders. I can then use a different DVD/video processing program that is smart enough to control the reduction just enough to comfortably fit/fill a DVD/DL (I have such a program) and not use a 100/50/25% approach to compressing/reducing.
to reduce the image size from a digital camera to something acceptable for posting on the web without destroying the image quality?
My camera gives me pics that are 1200 x 1600 pixels at 72 ppi. way to get it down to the 300 or 400 range?
what's the best way to reduce an image's size and still keep it crisp?
If resorted to creating images ten times the target size and then reducing them later on to the target size, as i can control the FX much MUCH easier.
but the only issue is when i reduce their size, they don't look as good? i know it is possible somehow to keep the quality, but i'm not sure how.
Trying to reduce an image of 6000x1200 to a tenth of it's size for a Signature.
I am a new member and a fairly new user of Photoshop. The company wehre I work had outsourced icons in 16 px x 16 px size bitmaps with magenta background. They got the results they were looking for. Please see blown up image below:
Notice that the image has a uniform background color that we require!!
I created a similar image of 160 px x 160 px size in Photoshop. When I reduce the image to the icon size of 16 px x 16 px and save as a bitmap file, the background is pixalated.
JUST GETTING INTO USING PHOTOSHOP AND WOULD LIKE SOME GUIDANCE IF POSSIBLE WITH THIS. I'VE UPLOADED SOME IMAGES FROM MY CAMERA AND ARE TOO LARGE TO EMAIL. THEY AVERAGE APPROX. 3.6 MB AND HAVE TO BE UNDER 500K.
HOW THRU PHOTOSHOP CAN I REDUCE THE FILE SIZE TO MAKE THEM MORE MANAGEABLE?
I'm editing digi photos about 6mb in size and dragging/copying them into another file (template) which is much smaller. When the photo appers in the new file it's huge. So I use the free transform tool to get the image down to the size and position I want and all is good.
I lose the focus of my subject (close up of Rolex-Omega watch's). Now the original shot is perfect and most of the time I dont have a problem in that the focus remains perfect after reducing the image down. Have I clicked on something that I shouldn't? I cannot work it out, the photo's are all in a batch, the first 4 were perfect and the 5th, just not having it, even after re-taking the picture.
I'm using Photoshop CS6 (64-bit) and ACR 7.1, all patched to the latest version today (13 June), and running Windows 7 64-bit. When I reduce the image size of an originally smart object using bicubic, the edges will be somewhat transparent, creating an ugly border around the image.
Step 1: Open a raw file. ACR 7.1 will pop up. The raw file is a CR2 file produced by Canon EOS 7D. Workflow option: sRGB, 16 bit, 3888x2592.
Step 2: Press shift+click the Open button to open it as smart object.
Step 3. Right click the layer and choose rasterize layer. When you zoom the image, there is nothing wrong in the edges.
Step 4: Resize the image (CTRL+ALT+I) for example to 300x200 using Bicubic resampling (bicubic auto, whatever).
The edges (outermost 1 pixel) will be transparent!
This doesn't happen:
* in photoshop cs5
* if I use bilinear or other resampling
* if I import the file from ACR to PS as a normal bitmap (not using shift+click)
My workflow involves opening files from Camera Raw as smart object,
I have many images of slides scanned at high res (4800 DPI, maximum pixels 5214x3592). Although I will be saving these as loss less TIFs, I also wish to make JPGs from them that I wish to be just less than 5 MB in file size. Aside from cropping, I know I can achieve such a reduction of JPG file size by a combination of saving to lower quality JPG compression or reducing image size. My question is, what is theoretically or practically better, achieving this mostly by reducing image total pixels or by reducing JPG compression quality.
View 16 Replies View RelatedUsing ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies View RelatedMy picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies View RelatedWhy is the image on the screen small the the actual file size. As an example I have an image thats 5.7x5.7 @72DPI. My canvas says 100% but the image on screen is about 3x3.
View 3 Replies View RelatedCan someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
 When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
What kinds of red eye reduction do you know but standart red eye tool?
View 1 Replies View RelatedI am trying to remove red eye in some photos but when I click the eye area the face gets this bluey green tinge. Please advise what I am doing wrong.
View 1 Replies View RelatedWhat Noise Reduction do you use/recommend for getting rid of heavy noise on
photos?
a good noise reduction plug in to Photoshop, or alternatively a comparable program?
View 5 Replies View RelatedI can't remember reading any tutorials on dealing with noise in Photoshop. Scott Kelby dedicates a whole paragraph in his CS3 book for digital photographers. I need to make a decision on what noise reduction plugin to buy, so if you can reply to thread I can get a consensus of what is being used most.
View 2 Replies View RelatedIf the circumstances force me to work on images with noise which have to be enlarged, and if I use noise reduction based on noise-pattern-recognition, is it better to carry out the noise reduction before or after the enlargement (and in case the answer is after, which resampling method would resample the image (and thus the noise) best for subsequent noise reduction?)
View 15 Replies View RelatedIs there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies View Relatedam having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View RelatedBackground info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
So, I'm trying to create a repeat pattern of a Balloon illustration I've done in Adobe Illustrator. I've got the singular file (balloon.ai), which weighs in at around 700MB.
Now I'm trying to create the repeat of this pattern on a separate Artboard which will repeat these balloons, 30 balloons per repeat square to be precise.
What would be the best way to import these separate balloons into the repeat square once (as they're the same file) without affecting the weight of the file and performance of Illustrator?
So, in essence, is there a way to import that balloon.ai file and only have it use up 700MB on the page rather than 30x700MB by the time I've placed 30 balloons?
I can't rasterize the files as the printer needs the raw file.
How can in retain my original jpg file sizes when processing multiple file in 11 using expert mode.
View 9 Replies View RelatedI designed artwork for a large banner (84" x 32") so my AI artboard is that large. As you can imagine, with all the text and graphics I used, this file size is 22.8 MB. I need to email this art to the printer, but the file size is too large to email. How do i go about reducing the file size in AI so it still maintains large format print resolution? Will saving to a PDF lose the print quality?
View 7 Replies View RelatedI just finished downloading the most recent PS CS6 updates from the cloud.
I currently have 13.1.2 x 64. I do not have Shake Reduction in Filter > Sharpen. How to get Shake Reduction to show.
Every time I try to use shake reduction, it works on the photo but then immediately crashes Photoshop CC and I have to reboot the computer to get it to open again. I suspect it has something to do with RAM. Mine is set for 1192MB. Is that enough? The images I tried were about 2000 x 3000 at 72ppi.
View 2 Replies View RelatedI have the latest version of Photoshop updated from the Creative Cloud. I have a full membership and pay monthly so updates come up accordingly using the Adobe Install/Update Manager.
I really want to use the Shake Reduction tool but it is not appearing in my filters list even though I have Photoshop CC all updated? What to do to gain this amazing filter.
I would like to know to reduce a photograph to a simple drawing using a minimal number of colors such as 3 or 4, or even black and white. Here are a couple of samples of what I would like to be able to do. Is there a PS filter or technique that will do this type of thing?
View 3 Replies View Related