AutoCad 2D :: Running Dimensions Is It Possible?
Jan 18, 2013
i want to dimension a steel beam and i want to use a "rd"(running dimension) i'm using asd and autocad 2011 and i can't find how to use this command or tool i'm tryng to duplicate a drawing(drawing made with tekla) but im pretty sure we can do it with cad tekla shows the runnig dimension and text on top of the arrow.it's a short arrow that measures from the base point(rd) it's not the whole dimension line like normally dimensioning
View 9 Replies
ADVERTISEMENT
Dec 4, 2012
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies
View Related
Mar 16, 2012
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
View 8 Replies
View Related
Sep 17, 2013
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies
View Related
Aug 22, 2012
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
View 9 Replies
View Related
Oct 9, 2013
Also be sure to pick the 'aligned dimension' method and not the 'linear dimension'. I hope that works in Revit as it does in AutoCAD.
View 9 Replies
View Related
May 21, 2012
I have two monitors hooked up to my system. One is the laptops screen and the other is an external monitor. All is working as it should with the two monitors.
My question is this: I've opened up widget B on monitor 1 and I've got some information that's on widget A that I want to look at while working on widget B. My idea is that I would open both widgets and have one open on one monitor and the other open on monitor 2.
Problem is: I cannot get it to do this. I can move all of ACLT to one monitor or the other but not both at the same time.
Now, I did figure out that if I opened the program twice that I could get it to work but my concern is using up processor speed to do this.
View 5 Replies
View Related
Sep 4, 2012
While working on assembly detail drawings my system pops up a message that " Running low on memory ".
View 3 Replies
View Related
May 10, 2013
I need to get all Autocad applications objects, not only active one.
I'm writing a program which is checking if XREFS attached to current drawing are not opened in another Autocad instance.
Normaly I can get document collection as follow:
Dim docCol As DocumentCollection = Application.DocumentManager
Is there a way to get an Application object from another Autocad process (acad.exe)?
I wonder if there is something like this:
Spoiler (Highlight to read)Spoiler (Highlight to read)Dim app As Application = GetApplicationFromProcess()
View 1 Replies
View Related
Jan 11, 2012
I haven't had enough of an application to justify trying to figure it out. At this point however, i've designed a small conversion form that can be called by our engineers and allow them to convert between various units. I'd like to have a button though that allows them to call up the Quick Calc application from within AutoCAD. What i'm wondering is how do i actually call a native autoCAD command? Is it possible and if so where could i find documentation on the syntax. For what it's worth i'm working in C# in VS 2010.
View 4 Replies
View Related
Jul 5, 2011
I installed the trial version of autocad 2012 yesterday and it worked fine when it stated after installation, but today i am unable to start it my old MEP 2008 starts up instead , i do not have the option to start 2012 there are no autocad 2012 short cuts on desk top ( I'm sure there was after instalation ? ) and it isnt in the start menu or the open with menu, i can see autocad 2012 in the program files but no exe files, how to recover the desktop short cuts ?
Is it a conflict with MEP 2008 ?
View 7 Replies
View Related
Dec 27, 2011
We have about 25 workstations on our partner company, with the exact hardware and software configuration. We have 2 workstations with problem, but the other 23 are fine. The problem is those 2 is taking to long when loading.
I tried to load the program without loading template (startup to 0) it loads fine. The problem starts after it loads template or existing file. I can tell it's not the file problem, because after we open a file successfully, any other file after that opens normally. So there must be another process after loading the first file.
I suspected there is an addon program that cause this. Is there a way we can see what processes are running on command line (like in Windows command console), so we can find what cause this?
I think this might also because they are using ACAD MAP3D 2010, which are not certified for Windows 7 64bit on their machine.
View 3 Replies
View Related
Jan 26, 2012
I have a new laptop (Intel i7) and having issues running Map 3D. There is a delay after every command.
View 1 Replies
View Related
Nov 7, 2013
At work, I notice that some of the newer draftsman (Me and about 3 other who have been there for 1-4 years) tend to prefer AutoSnaps on in some capacity and those who have been there for 7+ years tend to leave it off.
This has got me thinking about whether people prefer having AutoSnaps on in some capacity or another at all times.I tend to leave on End Point, Mid Point and Intersection on at all times, and just use CTRL + Right click to adjust as necessary.
View 9 Replies
View Related
Oct 31, 2013
I try to add the dwg to pdf.pc3 file to my AutoCAD LT 2014 (german) When I click on manage plotter a File Explorer Windows pops up instead of the plotter manager.
View 6 Replies
View Related
May 16, 2013
when my pointer is in the drawing window, it disappears. when i move away to the ribbon or quick access tollbar, it reappears.
View 7 Replies
View Related
Sep 5, 2012
I have an ilogic rule with multiple Subs. How could I run one specific sub contained in that rule from an iLogic form or another rule?
View 2 Replies
View Related
Apr 15, 2011
System Information:
Win 7 Pro 64-bit
AutoCAD Map 3D 2011 x64
Hardware:
Core i5- 650
8GB Ram
NVIDEA FX 580
Our company purchased two brand new computers and upgraded to Map 3d 2011 and it has resulted in major time lag and running slow issues. We use a 15mb city map as are main drawing file and in AutoCad Map 2004 it runs smoothly. After the upgrade thing are running very poorly. Selecting and deleting files that could be done in seconds in 2004 now can takes a 1/2 hour. The program also seems to get stuck periodical on a selected item , requiring restart. We have upgraded all the drivers and I have tried several different display drivers. I have saved the map as a 2011 file and I have repaired it. I have tried upgrading to Map 2012 but the problems persist.
View 1 Replies
View Related
Sep 27, 2012
I am having an issue with my contours running through my breaklines (feature lines). I have tried re-ordering the breakline, edits, etc and have also set my settings to allow crossings.
View 9 Replies
View Related
Jun 21, 2012
I have created a ribbon bar in autocad 2012 using API and c#. On ribbon button i am executing a Command method which display a wizard for copying some files.
Now i want to run a macro before executing the ribbon button command method. Which display a message box with yes and no . if user click yes command method will executes itself and display wizard for copy files.
If user click no command method will not execute and return. This will allow user to use macro for customizing the file copy process.
View 4 Replies
View Related
May 29, 2012
What is the reason for the error " Autocad is running out of system memory ".
when i open a drawing more than 5 mb, my autocad is getting very slow and this error is coming.
My system specifications are
intel(r) Core (TM)2Duo CPU
E7300 @ 2.66Ghz
3 Gb Ram
View 6 Replies
View Related
Nov 18, 2013
I am trying to work out a plan in Autocad and it goes so slowly. The slowest of all actions I do is always drawing a simple line. No other program is running on my laptop.
View 9 Replies
View Related
Apr 3, 2012
setting up Industry Model using Oracle 10g and 11g XE edition. I cant make it working, trouble starts when trying to create MAP 3d System User "MAPSYS" in Industry Model Setup, during user creation(about 68%) error popups" Could not create user MAPSYS"XE: Unable to deploy java package. Does XE version is suitable for Industry Models. Direct connection to Oracle 10g or 11G XE with MAP 3d working for me perfectly.
System I have is: WIN 7 Enterprise( 64 bit), database is Oracle 10g and 11g XE(32bit), client is Oracle 11g R2(administrator),all autodesk software is 2013 versions(64 bit). I tried it also with 2012 software but same result.
View 4 Replies
View Related
Nov 4, 2011
I'm running ACAD Map 3D 2009. I have to run ONE custom macro on a number of drawings that are stored in a particular folder.
Basically all I need is to:
open
run custom macro
close
go on to next drawing.
I just don't know how to write LISP.
View 3 Replies
View Related
Jan 3, 2012
Is it possible to refresh drawing content when modal form is running?
I placed sample project in attachment.
There is simple form with only one button.
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click Class1.DrawLineOnScreen() End Sub
After button is pressed, application prompting user for picking 2 points, and draw a line (based on picked points).
Public Shared Sub DrawLineOnScreen() Dim editor As Editor = Application.DocumentManager.MdiActiveDocument.Editor Dim pFirst As PromptPointOptions = New PromptPointOptions("First point: ") Dim rFirst As PromptPointResult = editor.GetPoint(pFirst) Dim pSecond As PromptPointOptions = New PromptPointOptions("Second point: ") Dim rSecond As PromptPointResult = editor.GetPoint(pSecond) If rFirst.Status = PromptStatus.OK AndAlso rSecond.Status = PromptStatus.OK Then Dim line As Line = New Line(rFirst.Value, rSecond.Value) Dim tr As Transaction = Application.DocumentManager.MdiActiveDocument.TransactionManager.StartTransaction Using tr Dim modelSpace As BlockTableRecord = tr.GetObject(Application.DocumentManager.MdiActiveDocument.Database.CurrentSpaceId, OpenMode.ForWrite) modelSpace.AppendEntity(line) tr.AddNewlyCreatedDBObject(line, True) tr.Commit() End Using End If End Sub
Problem is that line had been added to transaction (to Model Space block table record) but nothing change on a drawing. Line will appear on a drawing after closing the form.
In opposite situation, without using modal form (only console) everyting works fine.
<CommandMethod("DrawLine", CommandFlags.Modal)> _ Public Sub DrawLine() Class1.DrawLineOnScreen() End Sub
View 2 Replies
View Related
Apr 8, 2013
If there's a conflict between the UI for teh AutoCAD drawing window and Parallels? There seems to be a consistent change in mouse behavior when the mouse moves to the AutoCAD drawing window when running AutoCAD ('11, '12, '13, '14) under Parallels (5, 6, & 7).
Since Parallels is now officially supported.
View 6 Replies
View Related
Jul 5, 2012
We have some Problems with the running order of iLogic Rules.
I try to describe it in an Example, you can find attached. (The description (PDF) and the ipt-file)
We're using iLogic via Addin in Inventor 2010. But I also tried it, with the 2012 version (the same problem).
The attached IPT File is running in the correct order.
View 2 Replies
View Related
Oct 1, 2012
I just installed the student version of Inventor 2011 on my machine. Everything went well but when I double click the inventor icon nothing happens. Autocad mechanical and TruView work fine.
View 1 Replies
View Related
Feb 14, 2012
I have several AutoLISP routines that shell out to the DOS environment, collect file data, and write script files to perform tasks in batches withing a folder.
When the run, AutoCAD trashes my menu. It moves tool bars off the page--even though they're all locked--, displays the tool pallette, which I keep turned off, and generally behaves unprofessionally altogether.
How do I get this version to behave like and old reliable previous version?
View 3 Replies
View Related
Feb 6, 2013
how to Run Commands Using the API. And he also shows API can provide one sets of input to the command.
In my case, the Inventor command "analyze interference" need two sets of inputs. I tried to feed the commands with two selectset input throght API (see attached code). But the command looks like only take one set of them.So the behavior is not what I want.
So if it is possible, how to provide 2 set of pre-defined input to inventor commands throught API?
View 9 Replies
View Related
Jan 17, 2013
I want to run a batch file that will launch AutoCAD, run a program that will create some graphics, save and then exit AutoCAD. I'm sure this can be done, but I want to do it in Silent mode. The server it will run on has no monitor.
View 3 Replies
View Related
