AutoCad 2D :: Dimensioning Without Dimension?
May 26, 2011
When I am doing the details for a drawing I need to show the point at which a dimension on the elevations precisely starts but instead of the actual dimension I need a description such as "Frame Height", "Rough Opening", "Offset From Columnline", etc. I have always entered "T" after I set my two points for a dimension to replace the dimension with text. On my detail sheets there are a lot more of these than actual dimensions.
View 8 Replies
ADVERTISEMENT
Jun 2, 2011
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies
View Related
May 28, 2013
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies
View Related
Feb 10, 2012
Is it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
View 9 Replies
View Related
Dec 4, 2013
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies
View Related
Feb 23, 2013
how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies
View Related
Jun 27, 2011
Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies
View Related
Jun 23, 2011
I want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies
View Related
Feb 21, 2013
Can i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies
View Related
Jan 27, 2012
Is there a way to make the linear dimension a diameter dimension?
View 9 Replies
View Related
Dec 29, 2010
every one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies
View Related
Jul 29, 2011
When doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies
View Related
May 24, 2012
I need to know how to dimension to a theoretical sharp on bent flanges. In an .idw it wont snap to the sharp and when a schetch is created for one it does not dimension between them only one or the other.
View 2 Replies
View Related
May 20, 2012
Is autocad 2012 capable of dimensioning a solid object in model space horizontally vertically and diagonally say across the opposite corners of a cube, or along the hip of a roof? What am I missing here, I am using the full version of autocad for exactly this feature but am still unable.
View 4 Replies
View Related
Feb 11, 2013
Which category in the Dimension drop down menu do I use to obtain the linear dimension for the length of an arc, a 1/2 circle, for example.
View 4 Replies
View Related
May 15, 2011
When I am typing out text and get to a fraction is allows me to stack it diagonally so the 1/4" looks nicer. When i dimension, however, it does not seem to stack the fractions the same way. I took a look at the Format - Dimension setting and did not see the option in there to change it. I would like to have the fractions stack diagonally like they do regular text.
View 1 Replies
View Related
Feb 13, 2012
Is there a way to have AutoCAD use the "right angle symbol" instead of showing 90 degrees when it measures right angles?
View 8 Replies
View Related
Aug 5, 2012
I have a small job in Europe and need to dimension in metric units.
Can I do this and how?
I am using AutoCadLT 2009.
View 1 Replies
View Related
Jul 11, 2013
Is there a way to change the way the dimensions text shows up at arbitrary angles and make them all uniform?
View 4 Replies
View Related
Jun 6, 2013
Whilst dimensioning in paperspace I dont seem to be able to get the dimesions to sit above the drawing in model space. for example if I place a leader across the drawing to a specific point the leader sits under the drawing and is lost/hidden. how I set the dimensions to sit above the drawing.
View 1 Replies
View Related
May 14, 2013
I have a fairly complex solid model built in Autocad 2013. I would like to dimension it now. I have various individual parts plus sub assemblies and weldments etc. What are best practices for doing this in an organized way? Should I copy various parts over to other drawings and dimension them separately? It seems odd to pile everything onto the one model. I know that Autocad is not Inventor (which I am somewhat familiar with), but does it have some similar tools for doing individual part drawings to keep things manageable?
View 4 Replies
View Related
Sep 10, 2013
Dimensioning in Isometric gave me a genuine PITA. Download my solution here .
View 0 Replies
View Related
May 8, 2013
While working on a drawing today I realized that when I modified dimension styles ... arrow size, text size, spacing, etc. , upon closing the modify style window the changes I'd made automatically took effect on the screen. In other words I did not have to use the dimension update command to make the changes appear in dimensions already in the drawing. All the dimensions changed to show the changes automatically. I'm pretty sure I haven't seen this before.
I went to another drawing and the updates did not automatically occur. I inserted part of the old drawing into the current drawing and made dimension style changes again. The changes updated automatically in the new content but not on the content inserted from the old drawing.
View 0 Replies
View Related
Feb 9, 2012
I want to create a block which will be able to automatically display dimensions as pulled from gridlines in two directions. The dimensions would be displayed over lines perpendicular to each other which would have arrows indicating the direction the dimension was pulled from. I am hoping to create a faster way to generate plans for field installation use. Currently we paste a block and manually type in the dimensions and rotate the arrows.
I have not figured out how to attach a graphic of the block and could use a tip for that also.
View 1 Replies
View Related
Apr 18, 2011
I am using Autocad 2000. I know, I am like an old dog who gets comfortable by the fireplace, and is happy with what I have. where the toggle is to set the dimensioning for metric dimensions. I have seen it in a couple of places and after I set it for millimeters, for some reason it still dimensions in English measurements.
View 3 Replies
View Related
Mar 4, 2013
I work in plumbing design and am constantly burdened by the tedious task of setting out hundreds upon thousands of penetrations every month for the guys on site to locate their plumbing points through the slab.
They use a GPS system to expedite the plotting, but first I provide a CAD file with just 3 layers; GRids ( a line ), Wastepoint ( a donut poly line ) and Fixture Name ( multi text) which the survey program can interpret and set out from ( actually, the surveyor only needs one point, which he grabs from the site grids that I provide ).
So that's all good, but on top of this I must dimension off the grids every point so that measurements can be done on site as back-up/cross checking.
Of course I can't have dims overlapping each other.
Is there any way to automate this part of the process? Taking a dim from the nearest grid (x and y axis) to the centre of the object I use for the penetration.
View 3 Replies
View Related
Jan 20, 2012
I am attempting -- without much success -- to put my dimensions in paperspace. The problem is that sometimes (almost always) the dimension value is in paperspace. That is, when I do a Linear Dimension of two points of an object in paperspace the resulting value will be a few inches instead of many feet.
My model is drawn at full size; my viewport is set to 1/4" = 1'-0"; I am using ACA 2012.
I am not sure if it instructive, but I have found:
- The only time it comes out correct is if my first point is at 0,0. But if the second point is 0,0 it will be wrong (paperspace value). Bizarre
- most of the "wrong" dimensions have the "Associative" property is set to "No". The box is grayed out so I am not sure how to change it.
- If I MEASUREGEOM, the value is the correct model space length but if I do a linear dimension using the same two points the value is in paperspace.
View 9 Replies
View Related
Jul 23, 2013
I'm using AutoCAD 2012, and trying to move my UCS within a viewport to a corner of my detail, but when I start to dimension using ordinate dimensioning, my point of origin (0.000) it gives me (1009.2003). In AutoCAD 2002, I could move my UCS within a viewport and start ordinate dimensioning and my (0.000) would be where I moved my UCS to.
View 0 Replies
View Related
Feb 9, 2012
Im having an issue with my dimensions when set on the architectural units settings. The dimensions are coming up as inches even though I have the setting set to feet. When I change over to decimal feet the dimensions show as feet.
View 4 Replies
View Related
Jan 2, 2014
The company I now work for does everything in 3D with vanilla AutoCAN'T, 2012-2014. There are only a few 2D objects in any file. The problem I'm running into is when dimensioning the 3D geometry in paperspace, the dimensions will not always stay anchored to the points that I've snapped to. If I have to go into the block editor the dimensions will fly all over the place when I exit it.
VIEWBASE really useful to alleviate this problem, but not everyone is on the same version and we're saving back to a 2010 format which creates proxy objects when opened on another machine. I'm not sure if I have the freedom to start using it.
View 9 Replies
View Related
Apr 25, 2008
my normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
View 7 Replies
View Related
