Is it possible to set a viewport's visual style without opening the drawing in the editor? I would like to set a visual style on all viewports for a batch of drawings.
As a followup, could the viewport then be part of a publish event and have the new visual style hold without opening and reneging the drawing?
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedI have code that has the user select a viewport. I then need to set the selected viewport to an existing view, but I cannot find any exampes of this.
I have the viewport, but how do I get the ViewPortTable/ViewPortTableRecord from it?
Do I need to set the view in the ViewPortTableRecord od the ViewTableRecord?
No problems to this point...
'Code snipIf acPrmpt_res.Status = PromptStatus.OK Then
Dim acVPort As Viewport = Nothing
Dim acViewTbl As ViewTable
Dim acViewTblrec As ViewTableRecord
[Code] ........
I am working on a drawing I have been sent by a consultant and having difficulties setting up the vport extents I need when using two vports. If I marquee zoom to what I want in one viewport it reverts to full extents as soon as I click on the other vport. I never had this before. Is there an obvious solution?
View 1 Replies View RelatedAfter setting a layout for printing current,
LayoutManager.Current.CurrentLayout = LayoutName
btblRec = CType(tr.GetObject(db.CurrentSpaceId, OpenMode.ForWrite), BlockTableRecord)
db.CurrentSpaceId returned the ObjectID of the ModelSpace and not of the Layout set current.
Is there something that could prevent this from happening?
I'm trying to create a new layout and then adding text and a view port. The add text works but the add view port method, written in AutoCad's Developer Guide, doesn't!
Sub MyLayouts(ByVal LayerVal As String) '*********************' '* Create Layout *' '*********************' 'Declaration' acDocs = Application.DocumentManager acDoc = acDocs.MdiActiveDocument acCurDb = acDoc.Database Dim acLayoutMgr As LayoutManager = LayoutManager.Current 'Notification' acDoc.Editor.WriteMessage(vbLf & [Default].MyApplication & " -> Création d'une présentation. ") 'Transaction database' Using acTrans =
[Code].......
I have some not displayed viewports in my drawing. I can select only the viewport while using filter command in autocad dwg. Also i couldn't able to see those viewport normally while command inactive. Actually i want to delete those viewport which is only one per layout. that one drawing having 100 layout.
View 7 Replies View RelatedI have a dialog box that has 2 list boxes. One box has the available layers in it, while the other will contain the selected layers. I want to use those selected layers as a list of layers that will be visible in a particular view port. I have searched all over to find information on what kind of list I would need and how could I use the list with a view port, but all I've found is info for one layer becoming visible.
I'm also looking into "FreezeLayersInViewport" but info sure seems limited.
I am using version B.219.3 (UNICODE) of Autocad Civil3d 2008 with service pack 2 loaded.
I am putting together some plan and profile sheets for a civil roadway job.
The annotation scale setting of the text in the profile xref and alignment xref is being ignored in the sheet file viewports. This text should be appearing at 1:40 scale, automatically, same as the viewport scale, but they are appearing very small instead. According to the way annotation scale is supposed to work in Autocad2008, this annotation should be appearing at the correct scale, automatically.
If I try to adjust the annotation scale to a ratio I think will work, it automatically adjusts the viewport scale to match whatever I enter for an annotation scale. What to try next.
Can files become corrupted in AutoCAD? If so, are there utilities to repair corrupt AutoCAD files?
How do you edit the scale property in a polyline layout viewport? I have a polyline layout viewport in Autocad LT 2002 that was created in full version of autocad 2000. Normally in 2002 Lt you can edit the scale properties in a layout viewport, but this is not available when I view the properties of the inserted polyline layout viewport. is there a way of changing the scale in either AutoCAD 2002LT or AutoCAD 2000 (full version)of this polyling layout viewport?
View 5 Replies View RelatedWhy in layout in viewport scale in these two file different ??? with same scale 1:60???!!! i cant find answer in file f-metric scale 1:60 while in e metric 1:300 to be same file F-metric ??if you make it 1:60 in file E-metric view will not same ?? what the reason ?
View 2 Replies View Related AutoCad 2011 for Mac..I am having trouble in understanding how to use the layout space or maybe it is more correct to say the paperspace...
The thing I´d like to know is how to be able to zoom and pan my drawing inside a layout. And not to zoom or pan the whole layout. Or let me say it like this: I have different layouts in one when I zoom or pan the paperspace is zoomed or paned. In another it is the drawing in the paperspace that is changing.
s I found things about values like VIEWMODE. When I type in this command I get the value but I found no way how to change it.
I'm trying to simply edit the default viewport in a layout that I've created. I can't seem to find any threads that were successful or answered about this. I need to set the scale, size and linetype of the viewport. When I've tried, the viewport has simply not changed. I'm afraid im not getting the current viewport. Im using ed.activeviewportid hoping that its associated with the current layout as specified by layoutmanager???
View 2 Replies View RelatedSeems this question comes up often so I put this together. If there are any errors or omissions
Options for setting Viewport scale.doc
I would like to modify the Quality setting shown in the "Shaded viewport options" section of the plot dialog box (see attachment). The default appears to be Normal, and the options are Draft, Preview, Normal, Presentation, Maximum, and Custom. I want to use Maximum for 11x17 PDF files but I have 1000's. I can't open each file and change the setting, and then Apply to Layout. I'd also like to know what "Custom" means, but I will settle for maximum for now.
Is this option available under PlotSettings somewhere?
I am in the process of creating a .dwt to be used to generate plan & profile sheets. I have attempted to set the viewport type to either plan or profile (depending on the viewport) but it keeps resetting itself to "undefined".
View 1 Replies View RelatedWhen i insert a xref in a drawing i always use the command "send to back" in the model space. However when you switch to the layout the xref sometimes is on top of the symbols in the drawing. This problem is easy to fix with send to back but when you want to do this you have to set the viewport to modelspace selct your xref and then send to back. This is easy to do when you only have a few layouts but when you have a couple of layouts with several viewports in each layout it's a very time absorbing job. Is there any variable to make sure that the xref is always send to back in the layout space.
p.s i'm using Autocad LT 2010
There is a default viewport in Layout1. How can I reposition and resize it on the paper? It would also be sufficient if I could delete it--how do I do that? (then I could create one that fit my needs)
Briefly, what are disadvantages of not using Model view?
I can't seem to change a viewport in layout view to show my drawing properly. No matter what I do the page only shows a very zoomed in view or a very zoomed out view. I have tried all menu options witht he word scale in, including the scale list. I have looked in the properties inspector.
View 5 Replies View Relatedhow to make a 3D model visible in viewport layout?
View 4 Replies View RelatedMy layers in layout viewport are displayed in wrong order even after I use REGEN or REGENALL command.
I am working with drawing file with quite big amount of layers (about 100+ including layers of 7 xrefs) and because I want to use different layer settings for each printed drawing I work directly in the layout viewports instead of model space so I don't have to switch on/off countless layers all the time.
The problem is that quite often layers just turn into wrong draw order and don't come back even if I hit REGEN or REGENALL command. To solve this I have to zoom out, jump out of the viewport by doubleklick outside, use REGENALL command and then jump back to viewport so I can keep on working. This is extremely time consuming especially if it happens every 3 minutes, over and over again.
What is the ideal dimension style setting for metric say 1:100 scale. See my setting on the attachment.
View 8 Replies View RelatedIn the Band Style_A pdf you can see the location of my elevation labels, they are below the bottom line of my profile view grid. In the Band Style_B pdf the labels are showing up in the proper location (above the bottom line of the profile view grid). To move the labels to the proper location I changed the "Gap" setting from 12.5 to -24. Is there a way to change this setting in my "style" rather than have to go make this change to the style every time I use it in a profile?
View 3 Replies View RelatedWe have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done. This happens with any drawing she opens. She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit. The viewports are not locked.
We have had several people look at it and cannot find what command or setting she changed. She does not have admin rights so I do not think she could have run a script. She is not familiar with AutoCAD Architecture, her experience has been limited to Revit.
I am having some difficulties when printing via dwg to pdf a rendered shade plot viewport in a layout. However, there is no problem using realistic shade plot. I am using the following materials: Metal | Alumininum (Anodized Blue, Anodized Blue-Gray), Plastic and Glass and the result is not good as all. I am also looking on a tutorial on strategic place to place light for even more realistic rendering.
Examples.dwg
Example Rendered.pdf
Example Realistic.pdf
calculation a viewport scale of 1"=30'.
I've looked around and only find nearly what I looking for. For 1"=20' I have a value of 0.004167 Paper Units = 1 Drawing Units, but what is the formula to calculate 1/30"=1'-0"?
I have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies View RelatedIs there a surface setting / style option where contour labels (elevations) will display at some specified interval as part of the surface rather than going through and adding them as labels afterwards? Seems like a rudimentary operation, where the labeling can be so scattered and random.
View 2 Replies View RelatedWe are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template
I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.
After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.
i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?
I have got troubles with textures in the new Inventor 2013. When I try to programmatically change a texture in a render style of a part (no matter, whether I use an existing render style or create a new one), when I set the texture file name, Inventor throws an exception "Bad argument". In Inventor 2012, it worked. How textures should be set in the new Inventor?
Sample
PartDocument partDoc = ... some initialization
RenderStyle newRenderStyle = partDoc.RenderStyles.Add("newRenderStyle");
newRenderStyle.TextureFilename = newTexFilename; //this throws an exception bad format, even if the texture is in the Inventor textures directory
partDoc.ActiveRenderStyle = newRenderStyle;
I have set my text style and the height but what i am suppose to write in the Widht Factor case ?? The default setting is 1.0000?
View 2 Replies View Related