AutoCAD .NET :: Load Toolbar Images From Resource File
Oct 28, 2012
Is it possible to load toolbar images from resource file instad file from disk?Now I did:
           AcadToolbar tb = mainGroup.Toolbars.Add("MyToolbar");
           tb.Visible = true;
           tb.Dock(AcToolbarDockStatus.acToolbarDockTop);
           AcadToolbarItem i1 = tb.AddToolbarButton(1, "Test", "TestButton", "x1bx1bTESTCMD ");
           i1.SetBitmaps(@"D:IconsBMP est.bmp", @"D:IconsBMP est.bmp");
I can't say that it's very useful. Is it possoble to load images from my plug-in DLL (resource file)?
View 1 Replies
ADVERTISEMENT
Jul 8, 2005
I've been running ADT 2005 successfully on windows XP Pro for a year, but suddenly after running the backup program in windows XP, I effectively cannot startup and run AutoCAD for all the "Resource Manager Errors".
Checking the Autodesk knowledge base, the problem is recognized, but the solution does not appear to be available to me. Here is what Autodesk has to say:
Startup error: Cannot load resource only dll
Published date: 2004-10-21
ID: TS100289
Applies to:
Autodesk Architectural Desktop 2005
Issue
When you attempt to launch a session of Autodesk Architectural Desktop 2005, the following error message is displayed:
Cannot load resource only dll
Solution: This error message typically occurs on systems running a backup software, such as Backup Software Verita 9.1. This software runs a remote agent that causes a conflict with the loading of ARX and DLL files associated with Autodesk Architectural Desktop 2005. In these instances, disabling the remote agent will restore the ability to launch and utilize Autodesk Architectural Desktop 2005.
*[back to me] - I've searched for the aformentioned "remote agent" on my system, but to no avail. Meanwhile, I cannot run ADT as it asks for missing files at startup and at every command.
View 4 Replies
View Related
Dec 19, 2013
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
View 6 Replies
View Related
Aug 25, 2011
I'm trying to get the autoloader working. [URL] .....
Looks like it's a 'fairly' new addition and dead simple but..
All I need to do is add a single resource folder in the bundle and to the xml file to be able to access the files in the dll.
How to modify the xml file and refer to this folder in the dll?
Â
<?xml version="1.0" encoding="utf-8" ?><ApplicationPackage SchemaVersion="1.0" > <Components> <ComponentEntry AppName="DOTNETTEST2" ModuleName="./Contents/AutoloaderDotNetSample2.dll" LoadOnCommandInvocation="True" > <Commands GroupName="DevDays2010"> <Command Global="DOTNETTEST2" Local="DOTNETTEST2" /> </Commands> </ComponentEntry> </Components></ApplicationPackage>
 I can't remember where I got the resource files from.
Here is the DevCast for creating the installer. [URL] ....
Also is there a way to change the path depending on whether or not you are debugging?
In VB6 I used a function
Public Function IsIDE() As Boolean 'Returns boolean value of True if not compiled IsIDE = (App.LogMode = 0)End Function
View 6 Replies
View Related
Apr 13, 2012
When I try to open a folder or collection of images (in Library, grid view), some of the images load right away, others take several seconds, and some never load. Instead I see gray boxes, albeit with the proper DSC number in the upper right corner of each. I'm using LR 3.6 on Windows 7.
View 4 Replies
View Related
Aug 28, 2013
I have a custom toolbar that I've used for years in an olderversion of CAD. Now I'm in 2012 and loaded my custom toolbar in from my previous CUI. Naturally it dropped in all question marks even though I have all paths in the support file added. I even copied all my bitmaps to autodesk's default bitmap location. Neither work.Â
So after that I went into the CUI and manually selected the bitmap image for "small image" and "large image". It shows in the CUI now, but no luck on the main board. (also, not that this matters, must be a glitch but it won't even show in the CUI until i manually select another bitmap and reselect my origional desired image)
So then I tried taking the whole path and copying it into the CUI manually but it goes right back to defaulting to (MYIMAGENAME.BMP) without keeping the extension. My other custom toolbars loaded with all the pictures but this one just refuses to cooperate.
View 2 Replies
View Related
Apr 4, 2012
How to set civil 3d 2012 to automatically load your templete file at start-up instead of a misc. drawing file with no styles or anything.
View 2 Replies
View Related
Jul 17, 2013
I'm trying to import a .tif image into autocad 2013 this image I clipped in ArcMap 10.1 and reprojected. The size of the image that I can't import is 36.6 mb, but I can import a MrSIDs image size is 611 mb into AutoCAD this is the error message that I get when I try an import the smaller image. "this file is an unknown format or invalid for images"
View 5 Replies
View Related
Aug 7, 2013
when we are trying to load images (orthophoto), the process stucks in C3D 2014 as well as in ACAD 2014. In the previous releases it worked fine.
C3D 2014: I.18.0.0, HF1
ACAD 2014: I.18.0.0
Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013
View 2 Replies
View Related
Oct 17, 2012
I've been very dissapointed with the 'new file' dialog box in inventor 2013 as it takes far too long to open and navigate. I was wondering if there is a way to add a link to a few drawing template files either to the ribbon or the quick access tool bar so i can avoid using the 'new file' dialog box.
View 1 Replies
View Related
Feb 26, 2013
Every time I start AutoCAD MEP 2013 I get a Resource Manager Error and then AutoCAD usually crashes. Specifically I get the message
Cannot find the resource string number 21517 in resource AecXBase70.
It lists about a dozen different string numbers.
View 1 Replies
View Related
Apr 18, 2013
I'm getting lots of error messages when I bring up drawings in my 2009LT. Resource Manager Error. Cannot load resource only DLL. File not found, then many similar messages with AecResMgrenu.dLL.
Over and over, keep hitting OK till drawing loads. Not one specific file either.
Also: Unable to locate resource string. Resource Manager is not correctly installed.
Is there a way to fix without reloading 2009LT and having to reset all settings. Can that file AecResMgrenu be replaced. I have backup Program Files on CD.
View 6 Replies
View Related
Mar 22, 2012
When I try to open the Drawing Resource Transfer wizard, sometimes it does not open,instead I get the message
how to prevent this from happening?
View 2 Replies
View Related
Jun 13, 2013
I've been using the drawing resource transfer wizard for years now, and all of a sudden it is very slow.
Usually it goes through the process of updating a drw in seconds, but now it takes second per item it copies to a drw.
Is there something that could be causing this?
View 3 Replies
View Related
Nov 21, 2013
I recently had an issue with the Drawing Resource Transfer Wizard. I went to go update a drawing and my custom title block was no longer an option to choose. I believe I used it Monday and it worked fine. I am using Inventor 2013.Â
View 4 Replies
View Related
May 10, 2013
When working in the "Layout" when I want to work with the "viewport" always a window "Resource Manager Error" that says "Unable to find a row with the number 25900 in the resource AecXDisplayPropsData60" and one key "OK" Click the window again propodaet but when I try to work with the viewport poevlyaetsya again.
View 3 Replies
View Related
Sep 5, 2013
I get a multiple error message dialogue "Cannot find resource string number XXXX in AeccPublishSVC 100 when exporting a DWFX file of drainage in Civil3d R2014 (I have R2013 open as well).
View 4 Replies
View Related
Sep 2, 2011
Whenever I hover over my guardrail Subassembly I created with SAC I get this error. It's tied to the Tooltip info because it only happens when they are turned on. I have written a lot of subassemblies with SAC and this is the first one with this issue. See video: [URL] .......
I saw other posts about similar errors recommending a repair, which I did try, to no avail.
AutoCAD Expert Elite
AutoCAD Civil 3D 2014 Certified Professional
C3D 2014 (SP1)
Win 7 Pro, 64-bit
View 6 Replies
View Related
Aug 5, 2013
adding an unused template drawing title block resource.Â
Â
'UPDATE TITLE BLOCK SHEET 1ThisDrawing.ResourceFileName="X:TemplatesStart Drawing.idw"
ThisDrawing.KeepExtraResources=False
DimoDrawingDocAsDocument=ThisApplication.ActiveDocument
'If iProperties.Value("Custom", "V1Scale") = NullString
oDrawingDoc.ActiveSheet.TitleBlock.Delete
[code]....
View 7 Replies
View Related
May 23, 2012
How to automatically run dvb file when acad starts, I have been trying in autocad but its not working.I am using ACAD 2007
View 7 Replies
View Related
Jul 14, 2009
I have just recently run into a problem with my CS3 Photoshop. When I try to go through File> Open and choose a .jpg .gif and even .psd file I get an error message saying: ' could not complete your request because it is not the right kind of document.' When I open in Illustrator there is no issue. Or when I go directly to the file and use Open with, then direct it to Photoshop it opens fine. However, if I need to open another image file I get the error message again.
View 1 Replies
View Related
May 21, 2008
I'm unable to load PNG images using Photoshop CS3. Whenever I attempt to do so, I get a message saying, "Could not complete your request because it is not the right kind of document."
View 1 Replies
View Related
Feb 20, 2008
I try to load my menu at application start. But I can't see this menu in the menu bar after start. I see menu only after I "reload" current workspace in user interface customization dialog.
const String myCuiFile = @"D:Visual Studio 2005ProjectsAutoCAD 2008Cuisits.cui";
public void Initialize()
{
String currentWorkSpace = (String)Application.GetSystemVariable("WSCURRENT");
CustomizationSection acadCustomSection = new CustomizationSection((String)Application.GetSystemVariable("MENUNAME") + ".cui");
if (acadCustomSection.PartialCuiFiles.Contains(myCuiFile) == false)
[code]....
View 5 Replies
View Related
May 11, 2012
Can I load an Inventor File with C#?Can I load an Inventor File with C# without Inventor Installled in my computer?
I have an Inventor File with a mechanical piece that move in his 3 axes, can I make a C# application where I insert some values and the application modify the inventor file and then view this "modified" mechanical piece on C#?( All this without Inventor installed on my computer)
View 1 Replies
View Related
Aug 13, 2012
I have a .lin file, that keeps giving me several "Bad Definition" dings. I acquired this ".lin" file at a previous job, and am not sure why I can not get it to load correctly now.
I am not the best, at writing computer language, so I know my issue is operator error, and me being the operator; I don't know how to solve it. I changed the ending of the file to ".txt" so it would upload, I couldn't get it too attach in the ".lin" format.
On another note, I'm extremely distracted right now from work, after Yahoo flashed there was a shooting incident at Texas A&M Univ. It makes a person wonder, "What is going on, with all the gun violence lately?"
View 4 Replies
View Related
Jun 11, 2012
I am using photoshop cs5 extended on windows 7, Unable to load camera raw images into photoshop directly or via adobe bridge.
View 19 Replies
View Related
May 15, 2013
If I want to load images into the bridge, if I put a stick to the pc it always connects me to Lightroom. What can I set that the windows appears that I can choose if I want to open it with bridge. I use a PC
View 2 Replies
View Related
Mar 2, 2012
sometimes when I try and load an image it won't actually appear int he workspace. I can see it in the Navigator thumbnail and it's got a check next to the filename in the Window dropdown, but I cannot see it anywhere nor can I seem to be able to make it appear. Am I missing something or is there a shortcut key to force the image to the center of the screen/workspace? I have the latest Nvidia drivers installed and I've even downgraded to PS running in 32-bit mode, with no better luck. I finally disabled OpenGL which seems to fix the issue.
Â
I'm on a MacBook Pro, 2.66 Ghz Core i7, 10.7.3, 8 GB of RAM
View 11 Replies
View Related
Jun 20, 2013
I am using AutoCAD LT 2014. Â I have started to have trouble loading the page setup from the Publish manager. Â I used to be able to click, "import" and select the dwt file I required. Â I could then use the imported page setup to publish the sheets I wanted to PDF. Â Now, when I try to import, it is not populating the pulldown list with the imported page setup.
View 7 Replies
View Related
Apr 19, 2011
I use VB.net in VS2010 design some drawings in AutoCad2011, in .NET 3.5.I write a Class Library in VS2010 to draw some blocks in Autocad, and it runs OK.
Then I design a Windows Forms Application in VS2010 for some inputs, and call my program above. However, everytime I got error as below in my Class Library code.File not found exception was unhandled,
Could not load file or assembly 'acdbmgd, Version=18.1.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
View 5 Replies
View Related
May 6, 2013
how to load .NET project dll file in AutoCAD LT for customization ? Because in plain AutoCAD command is there named NETLOAD to load DLL file but this command is not working in AutoCAD LT.
View 1 Replies
View Related
