I display Preview, then modal form with some options.
One option needs select window but I receive *Cancel* in command line.
If I try to select a window again, everything works OK.
If I disable displaying Preview, it works fine, but function is useless for my purposes
[URL]
I tried Regen, UpdateScreen, etc. after displaying Preview but with no effect.
While loading any dwg file in autocad 2013, the preview is wrongly showing after select some shortcut file in same dwg folder. and its not back to the dwg preview. its only happen in window 7 machines only.
View 6 Replies View Relatedi have a drawing file which is corrupted with unknown reason , windows explorer is displaying file preview but anyway autocad is crashing when i try to open this file .recover and open file in another version solutions are not working..how can ı open my corrupted file?
View 5 Replies View RelatedI'm using Application.ShowModalDialog to display a modal form to the user launched from a button on a tab in a PaletteSet. The modal dialog lets the user click a button to select a point. Is there any way that I can let the user run transparent commands and still return to the modal dialog?
The ideal would be for the user to be able to zoom and pan transparently from the GetPoint prompt. I could also provide a button to allow the user to reposition the drawing.
Using edUsrInt As EditorUserInteraction = ed.StartUserInteraction(Me.Handle) ' Get the insertion point from the userDim prPtOpts As New Prompt Point Options(vbLf & "Select center point: ") prPtRes = ed.GetPoint(prPtOpts)transientGraphic = DrawTransientGraphic(prPtRes.Value, BlockScale) edUsrInt. End()Me.Focus() End Using
How to loop until user quits picking points (escapes) this works but don't know if there's a better way
Dim bGotPoint As Boolean
bGotPoint = True
Do While bGotPoint = True
[Code] .......
I am using Paint Shop Pro X5 Ultimate.The Preview Window of the Manage Tab seemed to be displaying photos oddly - the photo wasn't filling the preview window (it was leaving an area around the bottom and right-hand side of the photo). At first I thought it was just the zoom setting, so I zoomed in. However, I have now used several features of the software that seem to show that the Preview Window (only on the Manage Tab) is incorrectly displaying the preview.
The problem became further evident when I used the Find People feature of Paint Shop Pro to locate the faces and tag several people, however the position of the tags are as if the Preview Window is filled by the photo. I have attached a screenshot that shows that the tag for the person in the bottom right-hand corner of the photo has her tag positioned off the photo (outside of the border of the photo) to the bottom and right of the photo even though it was automatically placed by the software. The position of the tags for the people in the photo are all offset slightly to the right and down and would be correct only if the photo was displaying correctly in the Preview Window.
I have tested uploading the photos to Facebook and the tags appear correctly once on Facebook. If I manually tag the faces as they appear on the Preview Window, the tags are incorrectly placed once the photo has been uploaded to Facebook (they appear up and to the left of where the face is positioned in the photo.
I have tried resetting the preferences and turning off some display features of Microsoft Windows, but I have seen to changes in the Preview Window.
Properties of your source files (format, file size, where did you get it?) The example photo was taken in .jpg format using a Nikon D3100 and 18-200mm Nikon DX lens, though this affects my entire photo collection taken on several different cameras and in several different formats (including RAW).
What devices are involved and their mode of connection? The files were transferred directly from the camera to the computer using a USB cable. Project Properties:I was using the Manage tab to sort photos and tag people using the Find People feature and also tried manually tagging faces.
Suddenly, each time that I attempt to plot or print a drawing I get the message "Errors or Warnings Found". I open it up and it shows that the plot has been cancelled. I have run all of the "traps" that I know but to no avail.
View 5 Replies View RelatedI am trying to limit the input that can be processed when using the getpoint lisp function. So the code below prevents the user from entering null input (i.e just hitting a carraige return) as specified by the initget bit code of 1, or a non-numeric entry (i.e. for instance, typing S and hitting a carriage return) as the getpoint function does not allow for a non-numeric entry.
(initget 1)
(setq PT1 (getpoint "
Pick Location of First Point: "))
However, the issue is that the code does NOT prevent the user from entering a number and hitting return. For instance, if I enter the number 100 and hit return, getpoint accepts this as a valid entry and returns a point value that is projected, in some form or fashion, from I believe the last entered point or (0,0,0) if a point was not previously entered. I only want the user to be able to select a point with a mouse click and not type in a number or point coordinate.
So is there some way with AutoLISP or Visual Lisp that you can prevent the user from typing in a numeric value and hitting a carraige return in conjuction with the getpoint function? Or is there some other function that will provide the getpoint functionality while providing the entry limitations described?
I am unable to plot PDF files from my AutoCad 2011. Plots OK in Word etc so Windows 7 printer seems ok. Get error message : Job: - Canceled
Job ID: 8
Sheet set name:
Date and time started: 4/07/2011 11:48:32 AM
Date and time completed: 4/07/2011 11:48:33 AM
UserID: user
Profile ID: AutoCAD 2011 Prosteel Ribbon
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: - Canceled
File: D:ProjectsP079 - PDG Engineering for Standard Stacking ConveyorC DrawingsdwgsP079-BMSPR01-0000-SS-DR-0059 to 0066.dwg
Category name:
Page setup:
Device name: Adobe PDF_A3.pc3
Plot file path:
Paper size: A3
MESSAGE: Error : A StartDocPrinter call was not issued.
ERROR: The device has reported an unknown error.
Job: - Canceled
In the early days of Lightroom there was a problem where if you cancelled a edit on a raw file in Photoshop without changing the file (maybe you opened in error) you still ended up with a tiff or PSD file that then needed manual deletion.
This was corrected in later versions. Now however the problem seems to have returned! Am I missing something or is it a screw up by Adobe?
1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.
2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.
4. Printing - EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem.
Problems encountered even after resetting through pressing F8 at startup.
At some point in my code I used to call AutoCAD 2012 this way:
AcadApp = GetObject(, "AutoCAD.Application.18")
This procedure does for some reason not work in AutpCAD 2013
AcadApp = GetObject(, "AutoCAD.Application.19") produces an error
If if dim AcadApp as object I get a <COM Type> object (which I cannot use or convert to AcadApplication)If I dim AcadApp A AcadApplication i get this exception:
{"Unable to cast COM object of type 'System.__ComObject' to interface type 'Autodesk.AutoCAD.Interop.AcadApplication'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{2959C1CC-8577-4EDB-ADDC-6EBBAB147926}' failed due to the following error: En sådan grænseflade understøttes ikke (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))."} System.Exception
What changed from 2012 to 2013?
i have a problem in Inventor 10 with the add method, which i didn't have in inventor 8, it's very puzzling. I open an assembly, add some parts (this goes without problems) then i open another assembly, change some stuff,close it again, so i'm back in the first assy and then the next add method fails.
Public Sub AddOccurrence()
' open assy
Set oAssy = ThisApplication.Documents.Open("C:TempAssy.iam", True)
' Set a reference to the assembly component definition.
Dim oAsmCompDef As AssemblyComponentDefinition
Set oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
[code]....
SSA rational method. I have to compare results of rational method between SSA and another product. Plain rational method, steady flow, Darcy-Weisbach. Times of concentration (TOC) are manually defined.
I played a bit with the units, formulas, IDF curve is defined as pair of values time/intensity. Seems that I achieved something. Results are more or less similar, but there are some differences. After playing with both programs, comparing in Excel, think that I found what is different.
So, I have very simple example, of one channel with catchment areas. All areas have the same runoff coefficient – 0.8. Pipe diameters are constant (500). The whole analysis is restricted between 5 and 10 minutes of rain duration (5 min-397.22 l/s/ha and 10 min – 321.53 l/s/ha). I converted IDF to mm/hr. So I have the next example:
[picture in attachment]
In theory, what I learned about rational method, there is next definition:
Intensity from IDF curve is defined by TOC. TOC is defined by sum of „entrance time“ (which is defined by shape and size of catchment area) and sum of upstream flow times. In my example I defined 5 min for every area.
So, for example for pipe nr. 3, TOC is calculated:
TOC_3 = Entrance time for area 3 + Tflow_1 + Tflow_2 + Tflow_3
For example:
TOC_3 = 5 min + 0.67 + 0.45 + 0.51 = 6.63 min
That TOC_3 (6.63 min) is base for reading appropriate value of intensity (I_3) from IDF curve. The flow in pipe 3 is then calculated:
Q_3 = I_3 * (A1 * k1 + A2 * k2 + A3 * k3)
This is the way how I learned rational method. But results between SSA and another product (which works in a way explained above) are different. Differences increase downstream.
After playing with results in Excel, I found out that SSA does not summarize in TOC all flow times upstream. So TOC in SSA is calculated simply by initial entrance time and flow time in specific pipe:
TOC_3 = Entrance time for section 3 + T_flow_3
So, there is no time added from T_flow of pipes 1 and 2. Seems that it is major difference which leads to final results differences. I tried to understand all options of SSA to find possibility to add upstream flow times, but without success.
I need functions:
acdbEntGet
acdbEntMod
acdbEntUpd
of course, usingP/Invoke.
I am trying to display the Tags and Values of an inserted AutoCAD block in an Inventor 2013 dwg. I am using .Net studio10.I can list the properties of the block object but cannot get the "GetPromptTextValues" method to work. Problem is at the bottom of the code listed below.
' Connect to a running instance of Inventor.Dim invApp As Inventor.Application' Check to see if a drawing is active invApp = System. Runtime. InteropServices.Marshal.GetActiveObject("Inventor.Application") If invApp.ActiveDocument.DocumentType <> Inventor. DocumentTypeEnum. kDrawingDocumentObject Then MsgBox("Need to have a drawing document active")Return End If ' Create ref to active drawing document Dim oDrawingDoc As Inventor.DrawingDocumentoDrawingDoc = invApp.ActiveDocument.
[code]....
dynamic input.jpg
A while ago my dynamic input method went from aligned to some sort of midpoint angled method. Not even really sure. What this is / how to change the input method?
While looking at the different tolerance methods, I see a couple called MIN and MAX, which just tack these words to the end of the dimension. Is there a way to customize the tolerance methods to add suffixes or prefixes to dimensions, such as TYP or 2 PLCS or something like that, so that I can minimize my detailing time.
View 5 Replies View RelatedI recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
I'm trying to edit a set of titles made in Premiere in After Effects, and after I import the file (as a Premiere file) then load the sequence into the timeline; the preview is just a black screen throughout the entire preview. The titles never show up.
View 2 Replies View RelatedUser received this error after trying to open a 2nd drawing after receiving a fatal error unhandled excpection e0434352h 7c812afbh.
New error messag is: Method not found: "Int64 Autodesk.AutoCAD.DatabaseServices.ObjectId.get_OldId()'
I am getting Fatal error at the explode method in the following highlighed (red) code.
public class ExplodeDynamicBlocks
{
[CommandMethod("EDB")]
[Code].....
Also, if possible, how to combine two objectidcollection into one?
performance differences between:
1) Using a selction filter to get the objectIDs of a particular type, then iterating them, or
2) Iterating all modelspace objects, checking ObjectID.ObjectClass.Name for the desired type.
C3D 2012. I am trying to get the distance from the start of a featrue line to a selected point. My object is "FLobj" and my Point is PT1. I am using the method Get2dDistanceAtPoint. This is the line of code.
(vlax-invoke-method FLObj 'Get2DDistanceAtPoint pt1 'pDistance)
I keep getting "too many actual parameters".
Basically a project could contain one idw file, or it could contain 20 idw files or 100 or more.
Our titleblock has about 12 entries of project information that will be consistent on all sheets whether that's one sheet or a 1000 sheets.
Is there a way to link an excel file to each idw? (I'm pretty sure not : ) ) or some way to have a central repositor for those properties so that if something changes, we don't have to go back and change each idw?
I have seen the drawing transfer management wizard, but it seems like overkill to a situation that has to have existed a long time - that being needing customer info on a titleblock. Seems like it'd be the perfect think for linking an excell file or having actual properties in the project file.
I'm new in civil 3d road design so my question may be basic.when i prepare a corridor and proceed to get cut and fill it appears as zero.i think i made some mistake at a stage when in section line we decide surfaces..step wise from section line selection to cut/fill calculation also give me the general concept regarding selecting surfaces during cut/fill volume calculation?
View 5 Replies View RelatedI used it to clear out the old vertex information, and then add new vertex points.All works on the screen until you use the undo command then all the vertex points are lost. Just created new polylines and deleted the old to fix it. Not ideal as I was storing the ObjectId’s in Xrecords, which now have to be updated with the new id’s
View 3 Replies View RelatedI would like to introduce a macro to handle the skeletal method.
[URL].........
For AutoCAD 2006, I have an entity that I am changing properties of, but I cannot figure out how to set the colormethod to "By Layer." I am sure that I am missing something, but I am at my wit's end.
View 1 Replies View RelatedI need to get familiar with the Inventor API for my thesis.Currently, I need to extend the face of a part.I started with selecting the face edge by
Dim ActiveDocument As Inventor.Document
Dim spline As Object
Set spline = ThisApplication.CommandManager.Pick(kPartEdgeFilter, "please choose the face edge!")
This is working fine.I know that the next step would be to use the ExtendFeature method of PartFeature, but I do not know exactly how to do this. Do I need to get the face as parent of the edge? How can I invoke the extesion then?
1. start a new drawing from a template
2. start a new drawing from scratch and insert a titleblock
3. the hardest way to do it start from scratch and draw everything including the titleblock