For AutoCAD 2006, I have an entity that I am changing properties of, but I cannot figure out how to set the colormethod to "By Layer." I am sure that I am missing something, but I am at my wit's end.
View 1 RepliesI am using ACADE 2008 and VB.NET. I have a multitude of drawings that I am doing the same three and four operations on and would like to write VB.NET program to do it. I can get my selections set just fine, but my first problem is figuring out how to change all drawing entities color and linetype to "ByLayer". So far I have not gotten past changing just the color value. I have tried multiple variations on the following line without success:
myAcadEnt.Color = Colors.Color.FromDictionaryName("ByLayer")
I have a Lisp that I have been working on with some folks in the office, and i feel like i am close, but i am not getting the cigar. The idea would be to have the lisp allow the user to select a nested x-ref entity, and change the color and linetype of the selected layer, similar to the old "LAP" command (I know it is a dinosaur, but I still miss it). I seem to be doing swimmingly, code I have quasi-plagiarized. It seems to crap out where i try to pass the selected linetype back to the layer. I get the nastygram "Command: ; error: no function definition: GETLINETYPE" right after selecting the linetype from the dialog.
Code below...
x(defun c:CX (/ Sel EntList DataList cnt Num ClrNum EntData)
(if (setq Sel (nentsel "
Select object to change layers color and linetype: "))
(progn
[Code]...
HP Elitebook Workstation
Windows 7
I would like to add additional entities to the selection if any of the selected entities contains a an xdata value.
If I put the condition into the ImpliedSelectionChanged reactor I imagine will probably loop back on itself.
dynamic input.jpg
A while ago my dynamic input method went from aligned to some sort of midpoint angled method. Not even really sure. What this is / how to change the input method?
I would like to detect view change (especially when orbiting the view around) to automatically reposition table-like(block) entity such that the user can always see the face of the entity.
I figured out that there is viewChanged event in AcEditorReactor, but it doesn't seem like it is visible in .NET.
How could I use this callback function?
I want to change the selection method to feature priority.
Where is the button?
Not in the right click
For some reason I now have to enter a path name at a command prompt in order to open another drawing. I also have the same situation when trying to attach a pdf or jpeg file to my drawing. how to revert back to the standard window of opening or attaching options?
View 1 Replies View Relatedwant to upated attributes in proxy entity is this possible?
View 1 Replies View RelatedI have attached two images of a young girl. One image (the original) is the one with the busy background. The second image is the one that I have cut out. Now with the pattern I have inserted behind her, the image seems quite acceptable, but if it as a plain white background, there is still some areas around the hair strands that contain the bluish background. Also to get to the stage of my image, I had to delete some of the whispy hair strands to make it look acceptable.
My question is, do you think it is possible to cut this out any better. This was done using the Color mapping method, but I have tried a number of other methods, but cannot seem to keep the hair strands visible and still end up with some color contamination around them. Do you think you could try this image and see if it could be done better.
I currently use Mep 2012 although my question I believe is general in nature. As a sheet metal contractor I do drawings that have many different entities at various elevations. Many times I use change propeties to match the propeties of on entity like a linetype to change another. What I really need to do is have the ability to use a similiar button and match or change the "Z" elevation of a specific entity just like I do for linetype, color etc.
View 2 Replies View RelatedI didn't notice when and why it happened, but now when i draw white line, it appears brown. I didnt change any settings, just did my usual work, when it appears. Other colors are normal. What could it be?
View 6 Replies View Relatedi am looking for a lisp routine which can change all lines in color yellow ( in different layers) to color 8.
View 9 Replies View RelatedHow can i easy change the layer colors of all elements in a block and also the blocks in that block witout exploding everything ten times. I wish Autodesk create a button so if you select a block and use the button i had a choice to
select a layer or color. Looks so simple.
* setbylayer is not what i mean
* also don't want to use xrefs
how to change the color of many blocks to one color(such as red). The lines of object do not set to by layer in the blocks. It is annoyed to change the color in blockeditor.
View 3 Replies View RelatedIs there a way to change the color of the Vignette to match the page background color. It appears to that only Black is available at this time.
Is there a transparent vignette available anywhere .
I have a question regarding illustrator. Let's say I have a circle with blue fill and red stroke. And I place an image in the illustrator file. Now I want to change the red stroke of my circle to let's say a purple color by sampling the color from the image.
How can I achieve that with a eye dropper tool? Every time when I try to sample a color from the image, the whole circle will change to purple instead of just the stroke? I have tried multiple key combination, shift, alt, ctrl but they all don't work.
I need to change the default text color to a pantone spot color.
View 5 Replies View RelatedWhen I have any kind of layer, and I want to change the foreign or background color (with the color picker) I just cant. When I click on the foreign or background color it automatically selects the eyedropper tool, and I don't want this to happen.
View 1 Replies View RelatedA while back I saw a video about using the video editing capabilities. In particular the video showed a car with a colored sheet over it and the in the video the sheet was either pulled off the car or the car moved out from under the sheet (I cant remember which). Then the video showed how to use the color replace tool to change the color of the sheet throughout the entire video.
View 2 Replies View RelatedI have a star that I would like in a specific color, but am having issues changing it with the replace color and/or color replacement tool. The image is small, but I am trying to have all the pixels. The color I want to use is Pantone solid uncoated 655 U. This is the image I am trying to change.
View 4 Replies View RelatedQuestion #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
I have try Coreldraw X6 64bit in Windows 7, After use Color Harmony, I have a question about it, How to change color for selected object only, because color harmony change all color in object even it in different page ?
View 1 Replies View RelatedHow I choose a color for any new objects I want to create. I've opened the toolbox with ctrl-b, which appears on the left side of the window. If I want to , for example, draw a red rectangle, I use the rectangular selection tool, then the bucket fill, and I don't see how to change the foreground color to red.
I've read elsewhere in the forum that there should be two rectangles somewhere on the screen that show foreground and background color, but I don't see them anywhere.
How do I outline an image so I can change the background color without changing the image color ?
View 1 Replies View RelatedWhy won't the color picker change my font color? It has worked for months and today it won't.
View 1 Replies View RelatedSomehow I've turned off the color selection so that I don't have a color when I select a part of a drawing on a layer. The drawing area stays black whether I have selected it or not and I don't know how to turn back on the color.
how I can turn on the color again so that when I select a line it changes from black to red or magenta or whatever?
In photoshop elements 11, in a photo collage, in graphic tab, how do i change the background to a color in the color wheel?
Same thing for the graphics, i only have 6 choices, i want to add a graphic stored on my pc or other ones in the program.
In photoshop elements 11, in a photo book, page 2 and 3 are stored as one image, and have to have the same background color, and layout, how do i change that?
I am doing a routine to break a polyline in different points.
I do this by prompt with SendCommand.
string strHandle1 = id.Handle.ToString(); string strEntName1 = "(handent "" + strHandle1 + "")"; string strCommand = "_BREAK" + "
" + strEntName1 + "
" + String_point + "
" + String_point + "
"; Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.SendStringToExecute(strCommand, true, false, true);
However, I need the new Id of polyline to continue break in other point.
I have tried this:
ObjectId idNewEntity = Autodesk.AutoCAD.Internal.Utils.EntLast();
to get the last entity created, but with "break" doesn´t consider new entity created. Then, How can I get the new Id after "break"?
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I have a solid red image and I want to change that red to an exact red hex code I have. Is there a way to change this color without affecting the quality of the image? I thought this would be really easy, but everything I've found online doesn't give me the color I want, or It doesn't allow me to be 100% accurate.
View 7 Replies View RelatedI want to change it to either a color or transparent. I am placing detailed symbols (like this).
View 13 Replies View Related