Am into Customization of AutoCAD and the project which I am doing is almost completed. There is a small problem. When i double click on Line Dimension i should get a form to change together Line and Dimension, like we have in Inventor.
Am using C#.net 2010.
I have a form used to select from pre-defined settings (case statements in the rule) and custom entry.
I have a drop down that provides the selections from the pre-defined stuff or custom with fields that show the results.
If custom is selected the user is prompted to enter data in popup dialog boxes which all works fine but I would rather select custom and enter the data in the fields on the form than in the popup. can that be done?
See the png files
I want to just enter the data in without the popup box
I have a customize form to use in AutoCAD. If I minimize the form, I can not see it anymore in the AutoCAD application tray. I want to minimize my form and later restore it after editing in .dwg file.
How can I do that?
I would like to use a multi-list parameter in a form, that isn't a problem. However I want the selection to be copied to a custom parameter when the form closes. Is there anyway to fire a rule when the form closes or to add a multi-select list to a parameter, in a form?
View 2 Replies View RelatedI want to custom dimensions about text of the coordinate in DWG. It should be like this:
I select a point then there displays a string of X,Y,Z coordinate of the point.
I select the second point to place a horizontal line(fixed lenth base the string font size) and then the string.
the whole process is like radialDimension,but what I need is to describe the point x,y,z.
and the drawing should consist of start point(actually is the target point too) and end point and the line connects the two points and a horizontal line and a string.
I think this should be completed using Dimension Class(should be CoordinateDimension based Dimension).
give me some codes. Codes is better in C# of VS2010 for autoCAD2010.
Actually there is a simple solution for this. Using c# to draw two lines and a string. But this is really bad experience when I want to move the string.
How do you make custom dimension styles global? How do you apply them to existing drawings with recreating each time.
Autocad Lt 2012
I am still stuck with dimension size in LR4. If I would like to crop a picture to a certain dimension.
I need to have my pictures cropped to 4600 x 3000 - so what I am doing is I enter the dimension in custom ratio, then in export I choose image file and enter 4600 x 3000 in dimension size. and then - my picture turns out with 4600 x 2990?
I have managed to get the right size before but for the love of god I can just not remember what I did different then..
One of the features I was really looking forward to in CS6 was creating fillable forms with ONE application. I created a form following the step by step instructions in classroom in a book for CS6. When I opened the exported form in Reader X, I get a "This operation is not permitted" error. I opened the completed "end" document in the lesson to make sure I didn't commit an error, and I got the same message when exporting. I have looked for places in menus to modify security restrictions and I can't find any. I installed the updates and that didn't solve the issue.
I saw one solution posted which is to open the document in Acrobat, then do a "save as" option. Is there anything we can do that doesn't involve buying additional software? If this is not the case, then Adobe seriously needs to change its training and advertising about this functionality.
I am working on a form (global) and have added a picture with a parameter and a picture folder underneath. So that the picture displayed on my form will change depending on the parameter value.Here comes the trick. Only text parameters can be used!On the form editor only 'Text parameter' can be selected to drive the picture selection. I actually need an integer, so that i can use my User/Excel parameters from Inventor.
I can work this around with an iLogic rule to equal the value of my string Picture Parameter with the relevant integer Inventor parameter, but the rules need to be run before the pic and the form updates (by pressing the 'Apply' button at the bottom of the form and then the assy updates too. So this takes a couple of minutes)... whereas if it was an option on the form editor then the update would be instant without waiting for everything to update...
Is there a particular reason why the Picture Parameter only can be a text parameter?
In this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
I'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedIs it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View Relatedhow to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedI want to insert dimension lines on this project. But instead of having an actual dimension I'd like it just to be a letter that refers back to a chart of possible dimensions for that element. How do I do this? I'm using AutoCad Architecture 2012.
View 1 Replies View RelatedCan i change the length of the dimension line 'extension' when my dimension text placement is beside the dimension line (see attached image)?dim line length.jpg
View 6 Replies View RelatedIs there a way to make the linear dimension a diameter dimension?
View 9 Replies View Relatedevery one now a day i am making isometric drawings so i m little bit confuse in that i am using dimension and change the oblige angle text of dimension so is it right way or not ????
View 9 Replies View RelatedWhen doing an angle dimension and trying to put text under the dimension line, the text types out straight which if long enough will extend over the dimension line. Other then creating text with arctext, is there no other way to get it curved? I am using AutoCAD 2010.
View 3 Replies View Relatedmy normal dimension style has text above dmension line & I want to add 'typical' to it below dimension line.
I have done this lot of time in my previous job an year back. but I can't seem to remember what to type between dimension text & the word I want to add in edit text box, so that it appers below dimension line.
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies View RelatedWhen inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
I have been using AutoCAD 2006. Our company is switching to AutoCAD 2012 LT. I want to be able to add my custom toolbar buttons from the 2006 to the 2012 LT custom Ribbon Tabs & Panels. I have figured out how to make the custom ribbon, tab and panel. I just haven’t figured out what I need to do to get the old stuff to where I can add them to the panels.
I have custom 2006 buttons with and without flyouts.
When I drag a previous custom command into an existing custom tool bar and edit the custom command (then rename the command in the Name and Command Name) it also changes the previous custom command that I originally drug into the toolbar. What am I doing wrong?
View 2 Replies View RelatedI am trying to create custom Materials in Inventor 2013. I have been able to create the custom appearances I want use on the materials and store them in the Inventor Materials Library.
After creating the custom appearance, Ive created new materials. When I try to change to new material appearance from default to my custom appearance, upon hitting the 'apply' button I get an error message which reads, 'failed to updated style'.
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies View Relatedhow to place a 2 line text under a custom button.I tried to mimic some of the std button but it didn't work.
Attachment 1 is the std Tool Palette and User Interface buttons in the Manage Panels.
You can notice that the name is User Interface on the left and UserInterface on the right.
Attachment 2 is my button, on the left I CANNOT edit the name and on the right any changes automatically edit the left name.
At the end I would like my button the appears with one line: Extract and under Maint.
is it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View Related
