AutoCAD Map 3D :: Editing SDF Schema / Properties In 2012?
Apr 10, 2012
how to edit the schema/properties of an SDF in Map 3D? I need to edit existing properties. I have followed the instructions in 'Help', but even after clicking on 'Edit Schema' in the schema editor, I have no luck. I have been able to add/delete properties but have not been able to edit other things (such as existing property titles, display order, Type etc).
I have about 30 SDF files that were converted from SHP using FME. I know I can manipulate them in FME but each file has different properties and it will take me quilte a bit of time as I am not super familiar with it.
View 2 Replies
ADVERTISEMENT
Nov 16, 2011
when opening a .iam file i get the Error:
FATAL ERROR: Schema Migration occurring without Schema Version change. Migration: RSeRevisionHistory Schema
Inventor 2012 Professional SP1 64-Bit
Windows 7 64-Bit
View 1 Replies
View Related
Apr 27, 2013
For some unknown reason I am not able to change the properties of my tool palettes - see attached image. Haven't changed anything for a while but was working a few months ago.Unsure if I have accidentally changed any settings but the issue is on my Autocad LT 2013 and LT 2014.
View 2 Replies
View Related
Aug 29, 2006
Is it possible to edit harness properties, for instance, RefDes, of electrical components via API? We need it for integration of Inventor Professional with local ECAD software.
View 4 Replies
View Related
Apr 20, 2012
I like to have all my palettes docked, however, the Properties Palette won't stay docked after closing and reopening AutoCAD. Every time I open AutoCAD, the Properties Palette reverts to its undocked status (all other docked palettes stay put). Is there any way to remedy this? It's a pain to have to redock it every time I open the program.
View 3 Replies
View Related
Aug 5, 2011
I created a pipe network using Civil 3D 2011 and we upgraded to 2012 in the middle of the process.
I've always been able to edit the MATERIAL of the pipe for (I like to add class and type in this column)
It worked fine in 2011 as you can see in the first image.
But in 2012, the material changes that I added in 2011 chow up, but I can't edit them or revise them.
it causes me to have to label my pipes in the label editor instead of assigning the material property in the pipe properties with-in my pipe network.
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
View 9 Replies
View Related
Jul 18, 2007
can you reset the total editing time for a drawing back to 0?
View 9 Replies
View Related
Sep 24, 2013
In the DWG of my AutoCAD Civil 3D 2013 project, I just created a parcel manually - see the first attched file. It had "Property : 1" on the original DWG, when I created.
I selected this parcel => Properties tab =>Information =>Style:Create/Edit=>Parcel Styleroperty=>Design=>Parcel name template=> Name Template/ Name: <[Parcel Style Name (CP)]>:<[Parcel Number]> was changed to SHC Lot: <[Parcel Number]> to get the new parcel name "SHC Lot : 1" on the DWG successfully - see the second attached file.
I tried to add some chemical results (23.5 mg/kg Arsenic; 66.7 mg/kg Lead; 88.9 mg/kg Mercury) into the parcel. So I selected this parcel => Properties tab => Information => Parcel Area Label Style: Create/Edit =>Parcel Name: => Layout / Label Style Composer/Component name: Parcel Name =>Text: Contents <[Name(CP)]>
I clicked on the "Arrow" sign to bring the <[Description]> into the right-hand-side of Text Component Editor - Contents. I don't know how to finish this step and how to close the "Properties of Parcel" tab on the left-hand-side of the DWG (The selection of Parcel is still on). How to finish the last step and how to close the "Properties of Parcel" tab.
View 5 Replies
View Related
Jun 19, 2013
I am a standard AutoCAD 2012 user. I am trying to edit drawings created in Civil 3D 2012. Is it possible to edit attribute information? I installed Civil Object Enabler so now I can view the information but can't seem to edit it.
View 6 Replies
View Related
Apr 21, 2011
Because ~gasp~ it doesn't work the same as 2011!
What I would like to happen is have the full property menu open when I select more than one line of text and then double click. As it is, the quick properties opens (in 2011 and previous, full properties opened) . I still want the Edit Text window to open if I double click only one line. I have gone into the user interface and customized some of the items I want for double clicking, I know how to do that, but I'm not sure what change to make for the multiple item double clicking. I actually would like the full properties anytime I pick and dbl-click anything, you know, like the old days.
View 6 Replies
View Related
Jan 2, 2012
I been working through Ellen Finklesteins AutoCad bible (using AutoCad Architecture 2012) and in the first exercise (quick start, drawing a window) I was going ok until I had to edit the title block and no matter what I tried in AutoCad Architecture 2012 I could not find a way to edit the title block. Maybe I should have bought a book that was specific to AutoCad Architecture 2012.
View 8 Replies
View Related
Jul 11, 2012
In the latest version AutoCAD 2013, how does one get the XML wiring schema?
View 1 Replies
View Related
Sep 27, 2013
i have been provided a library for a plugin i have recently purchased. The library was kindly given to me but it isnt actually part of the addin so it comes with no support. It appears that it has been created in 2014 whereas i have 2013.
Can it be downgraded without downloading & installing 2014?
Can a library be downgraded to 2013 from 2014 without opening & saving each file separately? there are approx 1500 parts
parts are not interoperable within the software. There cant be that much difference between a 2013 & 2014 file surely.....
View 6 Replies
View Related
Sep 23, 2011
Running inventor 2010, Installed 2012 to get myself acquainted with the program before totally making the switch, In an assembly everytime I constrain something, or move it it gives me this error. Also I cannot bring this assembly into a drawing because of unresolved issues, yet i have fixed all resolved issues. I would like to get the ribbon platform down before I uninstall inventor 2010...any possibilities
View 1 Replies
View Related
Jan 30, 2013
There is import button which is import column schema (xml file) from file on Bill of Material window... Is it possible to make this within API, VB Express 2010.
View 2 Replies
View Related
Jul 14, 2012
I was working on a file earlier today when it failed while processing after I edited a particularly extensive mass. It asked if I wanted to save a recovery file, I said yes, but I am not sure it worked properly (it might have said 'could not be saved' but i clicked 'OK' quickly so i could re-open revit and get on with work)
Anyways, when I went back to start again it said I had to manually recover the file and that I should ask Autodesk support. I looked on forums and they said i should go to the 'open' dialogue box, check the 'audit' box and reopen the file, but after doing this I got a second error message that said something along the lines of "your file has an incorrect schema'.
This project is not part of any collaboration, it's standalone and on my home PC.I couldn't find any email to write to, or number to call, or FAQ, so here I am.
This is the third damned problem I've had with this file, might have something to do with a trojan on my computer chewing into my RAM but whatever the case it's time this crap stopped!
View 3 Replies
View Related
Feb 17, 2012
We have Coreldraw graphics suite 12. Our technical department asks if it is possible to draw electrical schema's with the program. Where can I find the necessary electrical symbols ?
View 3 Replies
View Related
Nov 4, 2011
We use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
View 2 Replies
View Related
May 22, 2013
the properties palette started only showing the current properites for the drawing and not the properties of the entity selected. what causes this i am using autocad civil 3d 2013.
View 9 Replies
View Related
Jul 10, 2012
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
View 3 Replies
View Related
Feb 13, 2013
Somehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies
View Related
Aug 13, 2013
It's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies
View Related
Jan 16, 2012
A user showed me today that she cannot see any properties for a wall, door, or other AEC object in the Properties palette.
Some options like height, width, etc. are shown, but not layer, style, etc. from the General portion of the Basic tab.
Is this going to be a reinstall scenario or is there a fix for this?
View 9 Replies
View Related
Jun 6, 2013
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
View 2 Replies
View Related
Mar 8, 2013
I recently had to reinstall my AutoCAD LT 2008 and now when I open the properties palette to make adjustments to dimensions and fine tune, many peramiters that used to be visible are no longer there and accessible. I used to be able to adjust the dimscale as needed in the properties window, but can't now. How do I get it back?
View 7 Replies
View Related
Oct 25, 2010
I want to set up my drawings so that the title block displays properties from the model. I want to set this up so there will be drawing properties to extract into Vault. So I want to know what other Inventor and Vault users are doing to get model properties into Inventor drawings: Using model properties in the title block and nothing to extract in Vault or Copy model properties so Vault has data to extract.
I want to know what the best in class practice is? What are others doing? I do not want to use iLogic I was out of the box Inventor functionality.
View 4 Replies
View Related
Sep 10, 2013
For the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
View 2 Replies
View Related
Jun 11, 2013
I finally got some Lisp scripts working. They generate a block library from a CSV file. The script reads the file, and generates a simple rectangular block based on dimensions on the line. I have another script that can read a csv of block names and values, and add these as attributes to the block.
The attributes added are simple, like "weight" and "max stack qty". I would like to be able to see these values in the properties tab or in quick properties. In my CUI I have "Display Custom Attributes" checked under "block reference".
However, when I select a block, no attributes show up. I can get it to show me things like "name" and all of the scaling values, just no attributes.
View 0 Replies
View Related
Mar 29, 2012
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies
View Related
Sep 25, 2012
After archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
View 4 Replies
View Related
Nov 12, 2013
Properties box is really long (horizontally). (see attachment)
When I select an object, then right mouse and pick "Properties" the box containing the different things to change is so long it runs off my screen and goes into my 2nd monitor.
View 6 Replies
View Related
