When I open any acad drawing acad immediately goes into regenerating model with a flashing screen. It will not allow any commands and I need to kill the application using the task manager.
View 1 RepliesI just starting working with AutoCad 2014 Lt....and its great. I have a problem with the interface when I have two drawings open at the same time that are xref'd...the screen starts flashing, mouse dragging and the operations are very slow. Example,. if I have the plan open and the elevations open in two separate model space drawings but the plan is xref'd into the elev for reference. Is this an issue for others? What is the fix? This didn't happen in our older ACAD 2005. It is distressing, and I thought it was a server issue, but if I work off my station only, it still happens.
View 1 Replies View RelatedWhy does my screen keep flashing black in Photoshop CS6 when I am working on an image?
View 3 Replies View RelatedI have windows 8 and just downloaded photoshop CS6. Why is my screen flashing when using tool and keyboarding?
View 1 Replies View RelatedApparently the issue has been happening since as far back as CS2. The flashing text cursor is only visible in the upper left hand portion of the screen. If the text your are attempting to edit is on the far right or bottom of the screen, the cursor vanishes. Some people have suggested zooming in and out, but this only appears to solve the problem because the art board may get nudged into the "good" portion of the screen. I did a screen shot and found that the cursor is only visible in about a 930p x 600p area of the window (not including toolbars). Incindentally, the is the same size that the window defaults to when initially opened. On a HD monitor, this amounts to a very small space.
View 9 Replies View RelatedWhat do I do? Everytime I am working in Photoshop my screen flashes black, and the entire image goes black.
View 2 Replies View RelatedI'm drawing polylines within a chart of elevation contour lines of a mountainous region in my country.
This is for the design of the drainage hydraulics of highways.
The Contour Chart which is in jpg format, I have saved it in photoshop in medium size to make my autocad drawing the less heavier in size.
In fact, my AutoCAD dwg file is only 69 KB big. I have however georeferenced my Chart by UTM coordinates, so it is a little bit big in the drawing.
My drawing is in milimetres and the chart size is: 3861 x 2848.
Here is the layout view of my drawing: Regen problem.jpg
What is making my AutoCAD crash all the time when I regenerate the model?
Is there anything I can do to stop this from happening?
I try to save my drawing all the time though, and whenever my AutoCAD crashes I have to close it up, then I have to open AutoCAD and the drawing again; but this is a bit tedious.
I just purchased AutoCAD 2012. I am having issues with the layer controls. for example, I make a new layer in the layer properties box. I then assigned it a color, line type and make sure it is on. When I go back to the drawing in the model space the color is not changed, same with the line type and the layer is frozen.
I don't know what is going on. I have tried to regenerate the drawing, switch to the layout tabs and back. Nothing seems to work but one thing. I go up into my ribbon where the layer properties are and nothing is changed as I have defined it in the layers properties box. Once I change it in the ribbon it applies to the drawing.
Is there a variable that I am missing with the new version or what is going on?
i used to open file off like 6.5 mb size easly and i have a save as version of it and it open very fast and normal , yet nowi'm stuck for like 15 mins on "Regenerating Layout" in command line...
and it only happen with this file also my RAM usage went beyound normal ?! So what to do ?
I have some Symbolic Lines in a Revit Family, any time I go to "delete" any of them the file goes into "Regenerating" mode and will not come out out of it without hitting "Cancel". If go to move or copy a "Void" I have created in the files it does the same thing.
View 1 Replies View RelatedI'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
Out of the blue my screen started flashing menu icons after every command except Save. I had two small files open, went from paper space to model space on one of them and BAM! flashing icons and prolonged lag time while the file went from model to paper space. Then after that every command (except Save) evoked some serious lag time and flashing icons.
View 3 Replies View RelatedI have an issue that one of my palettes when I turn it on it flashes and then disappears.
View 5 Replies View RelatedI finally managed to capture this phenomenon.... It happens every day, several times a day, but I was never able to capture it until now. Seems to occur when you open and close various palettes, but it's not reproducible on demand.
Civil 3D 2013, latest updates, Quadro 2000 (driver ver 9.18.13.1125)
I finally gave in and applied the LT14 registry "fix" to correct the flashing icons, monster lags, etc...might of fixed those issues (not sure yet) but now when I tap the F8 key to toggle Ortho on/off it also toggles on the Grid (which I do not want). If I keep tapping the F8 key it cycles through turning Grid on/off and turning Ortho on/off.
F7 still works like it should, toggling the Grid on/off.
I am encountering some frustrating issues with AutoCad 2114 and Windows 8, some examples are as follows.
-Flashing, glitchy, slow selection tool.
-With all snaps on, it seems as though it is harder than usual to get it to respond.
-Rotation of 3D items very slow.
-Items disappear when zoom is used.
-Redefining blocks, the parent block either increases or decreases in size.
-When opening a dwg created on 2007 one dimension moved from original location.
- Drawing extents changes and now longer can be zoomed as before, I have tried the F1 help to define the drawing limits and this has not worked.
One of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies View Relatedi like the way some images posted flash between the tweaks that have been done , it gives you a good look at before and after
how is this done?
I have just rendered an animation with moving people trains cars etc. My people were done with populate. They are theonly objects that flash. All other animated objects are fine.
View 3 Replies View RelatedI have a scene with a lot of objects and textures and my mouse is constantly flashing to a circle like if max is calculating or loading something. This is very annoying cause when the mouse becomes a circle I can no longer click and it is a circle like every half a second...
View 3 Replies View RelatedRecently i have been having a problem with Illustrator CC where while im working the top bar, tools etc will flash once for around a second then go back to normal while im doing this sometimes certain objects will be hard to move because of the flickering this keeps happening while working. Its kind of hard to explain really i have tried reinstalling Illustrator that didn't do anything and also resetting my preference which also didn't do anything. Ive tested other adobe products such as Photoshop which work fine no flickering.
I thought perhaps it could be a graphics card problems but tested a few video games and they run perfectly fine.
As in title, in Photoshop CS6 I seem to be getting an awful lot of flashing of the image area. By "flashing" I mean that the area turns completely black for split second fairly often. It seems to be somewhat influenced by my actions, as when i alt-tab out of photoshop with the window still visible, the image area stops flashing.
My PC's specs:
Intel Core 2 Quad Q6600
AMD Radeon HD5770
6 GB RAM
Windows 8
I seem to have found the thing causing the flashing, it seems to only occur when an area of the image is selected.
Everytime i try to use the text tool on photoshop CC it turn my picture black and keep flashing on and off.
View 1 Replies View RelatedUsing CS6 on windows 8, when I use the selection tool, my entire project flashes. Whats wrong and how do i stop it?
View 2 Replies View RelatedWhen I use adobe photoshop, when I perform an action, for example, magic wand, the whole adobe screen goes black, then goes back on. I have a new, fast computer with lots of memory, Window 8.
View 1 Replies View Relatedhow to make the Pictures flash? You know when you have a layers of different pictures and then to make them flash? i know you can do it with gimp but i dont want to install it as my computer is slow enough already... is it possible to do it in PS3?
View 6 Replies View RelatedIn Lightroom and other programs I own I can click a button to show blown highlights or clipped shadows. I can't find this in PS3 unless I apply a curve or levels adjustment.
View 12 Replies View RelatedI'm trying to make a small heart (like 30x30 pixels) that sparkles/blinks. Now, can I do this in Photoshop or Image Ready? I've tried everything in PS.
View 3 Replies View Relatedhow to make a simple animation of 4 images just flashing from one to another. it may seem simple to all of you but im still new to photoshop..
View 1 Replies View Relatedis there a easier way to make flashing animated gif? like the photoshop way? one that I don't have to add the white lines one by one, next to each other?
View 2 Replies View RelatedI want to animate it... say 3 to 4 lines that flash alternatley.... or one line that looks like the neon is fizzing out...
View 8 Replies View Related