AutoCAD LT :: Export Layout Command Not Giving Desired Results?
Feb 8, 2012
I need to have users plot to DWF from paper space so they cancustomize all the layers colors etc, on that specific paper space tab. I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
View 5 Replies
ADVERTISEMENT
May 7, 2012
I use menu's based upon the following snippet:
(if (or (equal choose "1"))(MYFUNCTIONSDEFINITION))
works a treat, its easy for me to understand even if maybe not totally orthadox in method.
So I can populate my code to have multiple selections such as follows.
(if (or (equal choose "1"))(MYfunctionDEFINITION1))(if (or (equal choose "2"))(MYfunctionDEFINITION2))(if (or (equal choose "3"))(MYfunctionDEFINITION3))
and so on, but the example above caters for situations the users enter the values of 1, 2, or 3. If the user enters anything else I get a nil response from AutoCAD. So I devised the following
(if nil (alert "Wrong selection"))
but no response from AutoCAD qua an alert
also tried to be more in uniform with the rest of the lisp and wrote
(if nil (MYalertRESPONSE))(defun MYalertRESPONSE ()(alert "Wrong selection"))
also fails to yield the desired response.
View 5 Replies
View Related
Feb 23, 2012
I use adobe photoshop lightroom 3.6, earlier i was able to export photos to my desired folders in desired format but i am not at all able to export any photos at all!
View 1 Replies
View Related
Oct 22, 2011
Run TIME command and then take the resulting text and save it to a file.
Ideally, the text file should be named based on the drawing name. I know there's ways to write text to a file but I haven't had any luck taking the output of a command and exporting it.
View 9 Replies
View Related
Jun 26, 2013
We are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
View 3 Replies
View Related
Oct 8, 2013
why the drawing plots results using the viewport scale in the layout is not accurate?
View 1 Replies
View Related
Jul 4, 2013
[URL] Basically, when I accidentally input a typo into the command line there is a massive lag before AutoCad comes back to life. Nearly three seconds.
This happens on our AutoCad 2014 LT installations too.
I have all the predictive/corrective command line features turned off.
I have also uninstalled 360 and online content services, prior to the problem, to no avail.
Our office internet is proxied, and there are no ports opened for any Autodesk products.
It's losing us valuable seconds / minutes / days / weeks / months, depending on how you look at it.
System information: Win7 x64 / 3DSMax Design 2014 SP3 / AutoCad 2014 SP1 Lenovo E30 ThinkStation Xeon E31225 Quadcore @3.10Ghz PNY GTX760 XLR8 2GB (332.21 Driver) 24Gb Ram Corsair 650w PSU
View 9 Replies
View Related
Apr 17, 2006
I recently built a new computer. In getting all my old favorite programs reinstalled I have found that when I am trying to export using the PNG format with alpha well the alpha is quite strange. If I view it in Irfanview it gives this weird effect like there is a background in certain areas, more directly in back of the main image.
Maybe it's Irfanview but no I just checked it out in XNView as well and the same thing.
what's causing this strange exprort bug?? Is there an specific update I need.
The image in jpg is a direct save to that format in Irfanview so you can see what I'm talking about.
View 4 Replies
View Related
Feb 16, 2013
How I can clear the results in this dialogue box?
View 2 Replies
View Related
Mar 5, 2014
I typeset long documents which often include several hundred labeled photos and illustrations. Much of our art is created off-site, but we label the figures in-house. In the past, this has been done in Illustrator, but I prefer to do it in InDesign.
Exporting an InDesign document as an .eps results in fractured type. Opening the .eps in Illustrator, a single word is now comprised of random groups of letters, and some of the characters are outlines. In the Export EPS dialog box, I've tried every combination of options under "Embed Fonts" and "Data Format." Is this a bug, or are .eps files created from InDesign not intended to be fully functional in Illustrator?
As an aside, InDesign files placed within InDesign documents often cause the program to crash when exporting to PDF. Perhaps that is a subject for another post, but it's basically the only reason I export InDesign files as .eps (so I can re-link the offending .indd file to the .eps and export to PDF). I don't really want to open InDesign-created .eps files in Illustrator -- I'd rather simply place the .indd as a link -- but sometimes it's expedient, and I'm curious as to why the type becomes fragmented.
InDesign CC
Mac Pro, OS X Mavericks
View 3 Replies
View Related
Jul 12, 2013
export search results as text or tab delimited file is this possible.
View 1 Replies
View Related
Nov 22, 2011
Does viewers command works only for the layout in which it was applied like pagesetup manager does? How it is related to the regen and redraw?
View 4 Replies
View Related
Sep 1, 2011
Is it at all possible to switch between layout tabs by a command? I'm messing around with a .bat file that creates a script for printing that only prints layout1.
The CAD file I'm trying to print has multiple tabs and all tabs have a different name, Lot 02, Lot 03, Lot 04 (not the standard layout1, layout2, etc).
View 8 Replies
View Related
Jul 31, 2013
Im using A.cad Mech 13 I'm having a problem with the base view command on the layout tab,I have a 3D object in model space I then click the base view command,select my object and select display in layout 1, I then select my views top,side and Isometric when I hit enter to confirm all views disappear leaving my template empty.
View 2 Replies
View Related
Nov 26, 2012
I am creating my files in 5x. The final product will be a printed 8.5 x 11 calendar. The company requires 300dpi resolution, and a bleed size of 1/16".
Product 8.5" x 11" Calendar
Final Size 8.5" x 11"
Bleed Size 1/16"
Resolution to Submit 8.627" x 11.127", 2588 x 3338 px, 300dpi
My page is letter size.The image is a bitmap composed of numerous photographs and vector graphics.
I have saved them to a CMYK BITMAP 300DPI.In Corel the image reads as 11.125" x 8.625"
When I export to a pdf or jpg the image size changes to 11.293" x 8.796" which will not work for the printer. It sets the design elements outside the 'safe zone'.
View 6 Replies
View Related
May 9, 2012
The key input that triggers the command that lets you select layout (.dwt?) files at the beginning before AutoCAD fully boots up?
View 2 Replies
View Related
Nov 30, 2013
Is there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies
View Related
Jun 11, 2013
AutoCAD command to turnoff the Model/Layout tab in autocad 2014 or which function i need to call from code.it will trunoff the modellayout.
View 7 Replies
View Related
Apr 24, 2013
I have been exporting my layout to a pdf and when I open on one computer it is fine, but when I open the pdf on another computer features are missing and I get an error message from adobe "An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct this problem"
I have restarted the computers, renamed the file. What to do now.
View 2 Replies
View Related
Apr 12, 2011
drawing created, set image in perspective, hide, used 3dOrbit to position and so forth to what wanted. Then create new layout which shows just fine.BUT can't "select" anything to export from layout. If try to export directly from drawing sheet it exports hidden lines and is white on black (which don't need or want in an advertising image).I KNOW this can be done since I did it 10 years ago, got nice clean images (for a number of products I sell) as *.wmf files that I have been using since then. But, have lost some of images and having a problem updating my company catalog (but need to recall how to do this as may need different drawings in the future-I did it before). Have read mentions here of JPGOUT command but that doesn't work on my AutoCAD 2000.
View 9 Replies
View Related
Nov 21, 2006
in Autocad i have set up my workspace layout (how all my toolbars are arranged), How i can export this and use it on somebody else autocad (transport via flashdrive).
View 5 Replies
View Related
Apr 4, 2008
i downloaded the trial version of 2k9, on a win xp machine, with the main interest in trying out this new feature...unfortunately i have yet been successfull in using it as autocad either locks-up durring the export or end up with an "unhandled exeption...eDegenerateGeometry"...
i'm also attaching the details of such an exception (and i probably should report this to autodesk for their investigations)...
View 9 Replies
View Related
Nov 3, 2012
I need moving my drawing from model mode to paper layout.
View 1 Replies
View Related
Oct 11, 2013
I have a Civil 3D project with piping networks, grading etc. The servicing and grading plans are on layout tabs (5 of each 10 in total). When I would go export layout Civil 3D would go into not responding mode and crash. This caused quit a bit of stress as we had to get the drawings out to meet a deadline.
After investigating this issue, we identified that we had save our layer states in the layer manager. Delete the viewport on the layout tabs, draw a new viewport and then reinstate the layer states for each layout. This resolved, the crashing issue.
Civil 3D 2013
Windows 8
Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
32. GB
64-bit Oepration System, x64-based processor
View 9 Replies
View Related
Apr 15, 2013
I want to use "export Layout" using API.
Also tried via send command, but no use.
View 1 Replies
View Related
Nov 7, 2013
VB code to do the EXPORTLAYOUT command? I need to create a batch program to do a large number of files from the layout to the model space. The program can either copy the layout to the modelspace and save or copy the layout to a new file. Either way is fine. These are old MDT files that we are moving into the Vault, but Vault doesn't like them and the drafters are using AutoCAD in modelspace to revise them.
View 4 Replies
View Related
Nov 30, 2011
I am using File>Export Layout to Model... command.
The drawing exported in half scale means a circle with 10mm diameter dimension on it exported as a circle with 5mm diameter But the dimension on the circle remains as 10mm!!!
How does this happen and how can I fix it?
View 1 Replies
View Related
Jan 18, 2013
I have a file dwg with a drawing (drawing of the customer) in space model and space paper I have several layuot (5). How I can save or export that file only contained in model space (customer drawing) and one layout of the 5? For example space + layout model No. 3 ...
View 1 Replies
View Related
Sep 29, 2013
I need to export a layout to a new model -as a new drawing-. I did ths after bind all the X-ref files and explode them all then with "Export layout to new model" command from the right click menu on Layout tab. But the file is slightly big, the file has more than about 105 layout , the AutoCAD gets hang and after about 10-15 mins it shows a dialogue box contents"Unhandelled exception has occurred in a component in your application. If you click continue the application will ignore this and attempt to continue" I clicked on "Continue" and a file has been created with 0 bites.And that file cannot be opened.
View 8 Replies
View Related
Jun 5, 2013
In Inventor, when I export my idw to PDF, then open the pdf, the PDF opens with the "layers" browser open. Its easy enough to click the little arrow and close it, but I had rather not do that everytime.
I can change the defualt for this one file (via acrobat>File > properties, initial view tab). But that does not work when I create another new pdf.
Nothing in the Inventor options when I export it makes a difference.
View 9 Replies
View Related
Nov 23, 2012
I have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
View 9 Replies
View Related
