AutoCAD LT :: 2013 Ungroup Accept Button
Jul 24, 2013
I am running LT 2013. I have the Group Ribbon turned on and use it constantly. Until recently, whenever I would select the "Ungroup" button on the ribbon, a box would appear below the ribbon with a couple of button choices, "Accept" or something else.
I was looking at the shortcut list a couple of weeks ago, and went to turn off the command line (ctrl+9), and apparently entered the wrong command. In trying to undo my error, I probably entered some other commands, of which I have no idea what was entered. As a result, My "Ungroup" "Accept" button no longer shows up.
I know I just turned off a setting. But, I have been through the "Shortcut Key" list and I can't find it. I've been through the listings with AutoCAD LT 2013, and I have looked through the forums to no avail. And turthfully,, there are other text readouts that I used to get when doing a command that seem to be missing too. However, for now, I'd like getting the "Ungroup" "Accept" button turnd back on. I'll worry about the other ones later.
View 2 Replies
ADVERTISEMENT
Sep 12, 2012
I need to work with latitude and longitude, I believe there is a way to do this in autocad 3D Basics, but I can not remember how. How I could change the units to accept lattitude and longitude?
View 3 Replies
View Related
Nov 22, 2012
I am currently working on a school group project that requires me to submit all inventor files as "LASTNAME_FIRSTNAME_PART,ASSY,DRAWING,etc..NAME". My original parts were all done in mm instead of cm, so for our project, I opened all new files and derived the same parts at a different scale to fix this scale issue between the members. For the new derived parts I temporarily allowed the file name to remain as part1, part2, part3.... and continued with the assembly. Now that my assembly is complete and I would like to change my part file names to the required format, my assembly will not show the parts and (?) symbol is shown by all parts with updated file names. I also changed the original file names and now the new derived parts, when opened, have the same (?) which I assume is related to the fact that the derived parts are dependent on the original file. Is there a way to update this information? We are using INVENTOR 2013.
View 2 Replies
View Related
Nov 13, 2013
i have downloaded autocad on a new computer and i am amazed i can draw and dimension at the same time.
first of all how do you ENABLE and disable this option because the other autocad app that i have on another computer doesn't work like this and second, how come the delete button doesn't work and how to enable this option because right now i have to use other features such as Trim and it's slow.
View 8 Replies
View Related
Feb 21, 2013
I'm trying to add a script to toolbar button from the server. The macro I'using is
^C^CSCRIPT;"//server/path1/subpath1/HVAC-DUCTS.SCR";
The message I take from autocad is "CANT FIND FILE"
View 7 Replies
View Related
Aug 23, 2012
In AutoCAD Architecture 2009, we had this awesome button that would basically "lock" the z-axis. This was very handy to move 3D objects around in the same plane.
Now in AutoCAD 2013, the button is no longer there! I found that you can make it a full-time change in the Options/Drafting tab, but we like to switch back and forth with this and that button was really handy.
I've also read that in older versions you could run the "AecProject.arx" file, but we don't have that in our AutoCAD 2013 folder (and I can't find it anywhere else on our hard drives.)
We do have AutoCAD Architecture 2013 but I was trying to only utilize what I needed rather than turn on Architecture every day.
View 1 Replies
View Related
Nov 3, 2012
I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
View 5 Replies
View Related
Feb 25, 2013
I'm trying to find out how to assign to a toolbar button the open command for a specific drawing.
The code I input at the cui is ^C^COPEN;"//server/subpath1/subpath2/legend.DWG";
The answer I get is
Command: OPEN
Command: //server/subpath1/subpath2/legend.DWG "
Unknown command "DWG"". Press F1 for help.
View 9 Replies
View Related
Aug 13, 2012
I have a couple of VB pieces of code that set up the standards of my company. What I want to do create a button in my Workspace -within a tab created by me with the CUI tools- and trigger my VB code.
How is possible to create this button?
View 1 Replies
View Related
Jun 12, 2013
I just loaded 2014 onto a new computer and poof every custom toolbar has a question mark. Yet the image displays on the preview in the cui.
All of my button images are in a folder on my C: drive and that path is in the support file search path.
I went to one of the buttons and click on the small and large image and browsed to the folder with the BMP files and clicked it for both small and large.. And when I clicked 'ok' everything started to display correctly.
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
View 2 Replies
View Related
Dec 10, 2012
I made a toolbar button with the macros @, and tried also @ pause.
I need this in order to shorten the procedure for relative coordinate input, but, after pressing the button the last point is entered and i cannot continue entering values like in the manual input at the command like, like: @5,5
Even if i use the "@ pause " sequence it doesn't work.
How to wait for user input?
View 9 Replies
View Related
Jul 9, 2013
On some computers with AutoCAD 2013 SP2, pan and zoom launched with the middle mouse button is significantly slower than pan and zoom performed by launching the PAN or ZOOM command on the command line.
View 7 Replies
View Related
Dec 26, 2013
The double middle mouse button click command. I use the middle mouse button to pan, but if I pan too quickly, it interprets it as a double-click and zooms all the way out. I tried changing the double click speed in my mouse settings but that didn't work. I feel like there should be something in the shortcut settings I can change?
View 1 Replies
View Related
Aug 28, 2013
Using LT 2014. If I select a few lines and group them, I can select that group, right click, and ungroup them. No problem.
If I group a few lines, then make another group of a few lines, then group the two groups together, then the right click menu will no longer allow me to choose ungroup. Also on the ribbon, the ungroup icon will not operate.
Before this I had LT 2011 (and before that) and I was able to group/ungroup multiple grouped objects at will. So this appears to be a glitch that was introduced since then.
How do I ungroup multiple groups?
View 9 Replies
View Related
Jan 18, 2014
currently I am using autocad 2011. I have worked in the past on autocad 2012. in the 2012 version was a function available to "group" or "ungroup" items. in the 2011 version I can not find the function. was is something they add on in the newer version or do I just overlook it somewhere?
View 1 Replies
View Related
Mar 1, 2013
If I create a parts list as a parts only list it groups all my ipart members into one single entry, but if I use the legacy option it shows them all separately.
How can I split this out in the standard parts only parts list?
Inventor 2013
View 1 Replies
View Related
Jan 22, 2013
For no apparent reason the Render Button at the bottom of the view frame has disappeared. With RayTrace I just get a black screen. It was all working fine then suddenly the problem occurred.
There doesn't seem to be anything wrong with the PC - I can render in MAX Design as normal.
View 8 Replies
View Related
Jan 2, 2013
I am growing increasinly frustrated. I just installed AutoCAD LT 2013 on my laptop. I managed to get everything customized the way I want, except the button icons on my (classic) toolbar are much too small. If I go into the menu and select 'use large icons', they are too huge. My screen resolution DOES NOT need to be changed or adjusted. I went to the help menu to see what I can do, and found that I can go into CUI and adjust the size of the button icons that way, via the button image editor, however there is no 'button image editor' dialog box when I select any given toolbar command.
View 1 Replies
View Related
Mar 14, 2013
I am not good with iLogic but I have this rule that gives me length and width of a sheetmetal part in mm and with , (comma). The rule works but the file will always accept saving regardless if there has been changes or not. I want the rule to only accept save IF there has been changes on SM_Length (=<FLAT PATTERN LENGTH> cm) and SM_Width (=<FLAT PATTERN WIDTH> cm) or Thickness.
sLength = iProperties.Value("Custom", "SM_Length")
sWidth = iProperties.Value("Custom", "SM_Width")
sThickness = iProperties.Value("Custom", "Thickness")
[code]....
Autodesk Inventor/Vault Professional 2013
View 3 Replies
View Related
Jun 12, 2012
My issue is with the Publish dialogue. I am publishing several sheets to PDF. I do not want layers to be available in the PDF. I shoud be able to control whether or not layers export with the PDF in the "Publish dialogue box > Publish Options > General DWF/PDF options > Layer Information" (then there are two options, either to include or not include layer information). However, when I change it to "don't include" and close out of that box, the main Publish dialogue still shows the layer option as included and the layers are in the PDF after I publish it. why the layers still show up?
View 2 Replies
View Related
May 9, 2013
As I'm trying to learn more of my new programs, I finally came across a tutorial that covered the Live Effects. However, after I've open and created an object (star)(that's another story), I go to the Live Effects button (per the tutorial) but nothing opens. Left click, right click, nothing brings anything up.
Also, in the tutorial it started by drawing the star object...click the icon draw a star, and I get a 6-sided filled object. No star to be found. The oval and rectangular objects draw fine. But no star obect.
I'm at the point where I don't know what should or shouldn't be somewhere or if something is or isn't working. I understand that the Live Effects can be pointed to an external folder where 3rd-party plugins should go, but I was also getting the feeling that something came with the program install (per the tutorial). I've gotten used to things not working in these Xara and Magix programs I purchased, so unlike my first couple of posts, the anger and frustration are being left out.
View 3 Replies
View Related
Sep 4, 2013
We have created a simple label and grouped several components in CorelDraw X5. Now we cannot ungroup the components. When we right-click the group, the options to group or ungroup are dimmed. The result is the same when right-clicking on the group in the object manager docker.
Perhaps related, is the fact we cannot select the components of the group from the object manager docker. We can select the group, but none of the individual components in the group. None of the layers is 'Locked' in the object manager docker so we should be able to edit them.
What might be preventing us from accessing the ungroup option for a group?
View 3 Replies
View Related
Feb 27, 2014
I have created 2 boxes. One filled with light green color and one filled with the darkest green color.I then select the blend tool, clicking on the boxes and then select to have a total of 50 steps.The blend tool does it work, creates a total of 50 boxes that goes from light green to dark green.
Now I need to "ungroup" the boxes into 50 separete boxes, everyone with it's special tone of green.I don't know if I have missed something, but for me I can't do that.
View 3 Replies
View Related
Feb 5, 2013
How do you Un Group several layers in Illustrator? My drawing had layers of information but now is frozen as one and I can't access or change the individual elements within the layers panel or dby picking them in the drawing.
View 6 Replies
View Related
May 31, 2013
I am working on a simple function to add/remove a non-printing stamp our drawings to specify a preliminary drawing. The issue is that I cannot seem to get AutoCAD to accept the text height in the Mtext command. Below is the code; try it and see.
(DEFUN NOT4CONSTRUCTION(/ CTR HGT PT1 PT2) (IF (EQ (GETVAR "CLAYER") "NOT4CONSTRUCTION") (SETVAR "CLAYER" "0")) (IF (EQ (GETVAR "CTAB") "MODEL") (SETQ HGT "8'-4"") (SETQ HGT "1"")) (IF (= (ASSOC 0 (TBLSEARCH "layer" "NOT4CONSTRUCTION")) nil) (PROGN (VL-CMDF "-LAYER" "M" "NOT4CONSTRUCTION" "C" "30" "" "TR" 90 "" "P" "N" "" "") (SETQ PT1(LIST (- (CAR (GETVAR "viewctr")) (/ (* (GETVAR "viewsize") (/ (CAR (GETVAR.
[code]....
View 9 Replies
View Related
Jan 17, 2013
I have a dwg showing both sides of a dinette. One side ("Left Booth") was grouped & then duplicated. The duplicate ("Right Booth") was mirrored and moved to the other side. I "UnGrouped" the duplicate ("Right Booth" - not shown in the attached clip), but I can not UnGroup the original "Left Booth" grouping. The original grouping has NO special effects (drop shadow, etc.), simply a group of lines, curves and rectangles. I can't find any "attachment" between the two.
How can I ungroup the "Left Booth" group?
View 8 Replies
View Related
Oct 30, 2013
I would like to split - ungroup an object and than put every part to a separate page ( need to export it to PDF after ). Since there are a lot of parts I would like to know if there is a quicker way, a macro ore something, to do this automatically.
View 12 Replies
View Related
Jul 10, 2008
i have 63 grouped objects - some of which include artistic text. I have worked with CD for a while now and have never had this happen. what have i done??
View 11 Replies
View Related
Nov 21, 2013
In CS5, I created a very handy action that allowed me to, with two paths selected, Divide, Ungroup, and Deselect, resulting in the divided paths without having to do each step manually.
In CS6, for some reason this is no longer possible-- if I try to record the same action, after the divide, everything is automatically deselected and I get a "The object "Ungroup" is not currently available" error. Very frustrating that the new version is more troublesome to use!!
I KNOW that it's possible to do this because I was somehow able to fudge it at one point and get this action to work. But I'm not sure what happened-- maybe a step was deleted in my action or something-- but one day it just stopped working. This action is basically THE function I use most in Illustrator given the way I work, and while it's not a huge step, having to manually reclick, ungroup, and deselect is a huge inconvenience.
View 2 Replies
View Related
Jan 29, 2014
I have placed showers within various apartments. These apartments are groups. I have made a change to the family, (realigned a reference plane to be equal between two points). Now I reload the family into the project and no matter what I try, I cannot load it into the project without getting the ungroup error.
Prior to the warning, it states i need to delete a number of dimension references. Which I allow, then the group error appears telling me I still have constraint problems.
I thought it would be fine to dimension to families in groups, but it appears their is the potential for problems.
View 2 Replies
View Related
Jan 5, 2014
I have a small graphic (logo) 'grouped' (in .ai) and it won't 'ungroup'? Never happened b4. ???
View 4 Replies
View Related
