AutoCAD LT :: 2013 - Set DefaultFormatForSave For ALL Users Options
May 16, 2012
I recently upgraded AutoCAD LT to 2013. It now appears that we need to drop the save as format back down to 2010 format.
I realise that there is a reg edit for "defaultFormatForSave" which can be changed to "48" but when a user first runs AutoCAD LT the setting is overwritten.
change the default save format to the 2010 format?
View 1 Replies
ADVERTISEMENT
May 16, 2012
I recently upgraded AutoCAD to 2013. It now appears that we need to drop the save as format back down to 2010 format.
I realise that there is a reg edit for "defaultFormatForSave" which can be changed to "48" but when a user first runs AutoCAD this setting is overwritten.
How to change the default save format to the 2010 format?
View 8 Replies
View Related
Apr 15, 2013
I have Autodesk Design Academy 2013 installed on a lab of computers in my domain. Students have been successfully using Inventor 2013 so far this year, and now they are trying to use AutoCAD 2013 and Mechanical 2013 but are encountering an error. When trying to start either of these programs, an MSI installer starts (I suppose for user-specific files) and then the message box below pops up:
After closing out the error boxes, the programs simply do not start. The domain users have their personal folders redirected from a network share, which is listed in the error box. Why these MSIs can't access the network location, I don't know, because the user logged in has full permissions on their own folder, and they can indeed access their folder from these computers. When I log in to the computer with a local administrative account, the programs work without error. how can I get around this so my users can actually use the software? Is there a registry key I can change to point to the local drive instead of their personal folders?
View 3 Replies
View Related
Jul 19, 2013
I have been having several problems with AutoCAD 2014.
1) When I make a line-I used to be able to type in the start point, angle, length, and end point. Now I make a line I don’t have that option. Furthermore I hover the muse over line and try to make an extension of for example 3.5" from the start point after I hit enter it will put the start point at what i think is a random point of the screen. How can get the options back.
2) When i press-pull an object-When i would press-pull an object i would (with my mouse) drag it in the direction that wanted it to go hen type in the length. So if i were to pull it to the right then type in the number it would go to the right.How can change that
View 2 Replies
View Related
Nov 22, 2013
In AutoCAD 2013/14, there is finally the option for removing Pan and Zoom from the UNDO list?
That would be like the invention of the wheel. For me it's a Buy/Don't buy option.
View 7 Replies
View Related
May 17, 2012
I've recently installed IV 2013 on my PC and when I attempt to import my 2011 Application Options over, they do no apply.
View 2 Replies
View Related
Sep 12, 2012
I had made a block for a series of unit heaters in 2011 and everything worked great. It had a block properties table that allowed a selection like this:
Input (Electric, Hydronic, Gas) --> Make (Ouellet, Reznor, etc) --> Size (150MBH, 250MBH, etc) --> Flue (UTR, Straight through wall)
In 2013 however, it combines the the flue options so it now if I select Gas, I get:
Reznor
Lennox
Reznor
Lennox
The first two being flue up and the second two being flue straight. The other options work fine because they don't have the flue option.
Why is this happening in 2013? I even made a test block in 2013 that follows the same format and it did the same. Is there a limitation to the number of flyouts in 2013?
View 6 Replies
View Related
Jul 30, 2012
I make use of thie BATTMAN command quite a lot as I set up and manage my drawings for my company, through this I am editing attributed information and have seen the options 'invisible', 'verify' and 'preset' are available. Confirm the functionality of this options and how they affect the attribute ?
View 2 Replies
View Related
May 22, 2013
I'm trying to explore possible options for displaying 3D geology models. In the attached I want to chop out the yellow solid and leave the other solids "as is" to reveal the various strata when the yellow solid is removed. I have removed the yellow solid but the results are not quite what I was hoping for.
View 6 Replies
View Related
Dec 13, 2012
Say I click on a line, and then go to the properties inspector to adjust its length. When I scroll down to "geometry" the options are greyed out and I can't adjust them. (see attached image)
It was working fine, and then the other day they were randomly greyed out, and I cant figure out how to get it back to normal. I don't know if I accidentally changed some setting or what, but it's like this on every object I click.
View 1 Replies
View Related
May 8, 2012
I have been changing setting in the Options dialog box for many years but have never made any changes directly to the "Working Support File Search Path" because these update automatically to reflect changes i make in the "Support File Search Path."
What is the purpose of these "Working" settings?
View 6 Replies
View Related
May 16, 2013
why I get a this when I click on a tab in the Options dialog box?
View 2 Replies
View Related
May 2, 2012
When i type "qleader" and go to settings and then check the "Always left justify" option under MText Options it will not save. I go open up another drawing and have to do this again. Is there anyway for it to keep the setting?
View 4 Replies
View Related
May 31, 2012
I am trying to plot a drawing on a tabloid sheet. I don't remember how to do so.Heres is what I have tried:
I went to "Page Setup Manager" in the options from right clicking on the Layout tab and then went to modify. From there I chose my Paper Size as "ANSI B (17x11 Inches). Then from the "What to plot" tab I chose extents and when I preview the print it doesn't incorporate the whole drawing, but only a portion of it. It does the same thing if I choose the other options (window, layout, etc...).
View 5 Replies
View Related
Aug 5, 2013
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies
View Related
Jul 2, 2013
The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies
View Related
Sep 19, 2013
I have an issue where 2 users need to work in an .idw file on sepearate pages, however it appears that not all the changes carry over whenr the repective users save and update.
View 4 Replies
View Related
Aug 28, 2012
I'm having a problem with text on the layout sheet moving between my computer and another user's.
Text and lines will be in place,and legible on one screen and saved as. when the other user opens the file, some of the text shifts from left to right.
Everything in model space is fine, its just the layout space where this occurs.
View 2 Replies
View Related
Mar 14, 2013
issue, more than 1 user needing to work on the same file. Of course this can create problems, like time mangement or users creating their own copies of files which leads to confusion about revisions etc.
I've looked into the possibility of using 'shared' files which updates edits made from multiple users but so far a solution has proved elusive. The only thing I found is called CadVault, but I don't think this does what I would like.
I got the idea from using shared Excel documents and it seems to work well, and IMO, CAD is the typical kind of application that requires this kind of manipulation, but I've never worked for a company that uses such a method. I'm baffled by the lack of information / support for this, unless I'm overlooking something.
View 5 Replies
View Related
Oct 16, 2012
I am working in Civil 3d 2012. Right now, we have about 5-6 different people using this software in the office. Each person has their own likes/dislikes for layer colors (also for their display color). BUT we all want to plot with the same lineweights.
What happens is the surveyor creates the drawing and existing layers (with a template). The engineer then uses the same drawing to design and create contours. The drafter then uses the same drawing to clean things up for final printing. So we have roughly 3 people using the same drawing. But the surveyor uses a black display and anything that is blue doesn't show up well, so they have it on one the lightest lineweights. I (the drafter) use a gray display have have no problem with blue so it's one of my darker lineweights.
What I'm hoping to do is create some kind of a scheme that would allow the user to simply change the color scheme (on screen) to match their likings. Similar to the User Interface. For instance in User 1 scheme, Color 8 = Blue. Then we can have multiple plot tables that would correspond to the colors.
View 9 Replies
View Related
Feb 27, 2013
How can I force all users in a domain to load the same add-ins with Inventor Professional 2012?
View 3 Replies
View Related
Sep 18, 2013
I recently created some iLogic based components. I wonder how difficult it is to protect the iLogic code, similar as VBA code which can be password protected.
The reason being:
1. Of course, to hide & protect the creator's modeling logic;
2. To avoid the relation between parameters being messed up by the end user unintensionally.
I did have the opportunity to raise the question during the Portathon event and the answer was that the protection not directly available, though the workaround could be mixing with some Inventor API coding in .NET.
However, this might defeat one of the benefits of iLogic, simple and ease to use, gentlr learning curve, especially for users with VBA experience. .NET might not be so easy for a lot of engineers from mechanical or other disciplines.
1 Disable the "Edit" button for iLogic components, including rules, forms, etc.;
2. Put all code that are to be protected in an external file, and then make that file unreadable (password protected, or other protection) to un-intended user, however, readable to those who have proper access privelege.
View 5 Replies
View Related
Feb 6, 2013
We are using Autodesk Inventor for our 3D modelling and we are working together with a group of scientists.
Those people would like to see our models, rotate them, take measurements, change the visibility of parts or subassemblies and maybe even make cross sections.
It works quite well with the Design Review program, but unfortunately our scientists mostly use Mac OS or Linux. Running Design Review under a windows emulation is not an option for our big models.
View 5 Replies
View Related
Jun 21, 2013
how I can move a user from one computer to another and have them keep all of their settings in AutoCAD Architecture 2013.
We are upgrading user laptops. I have used the Windows 7 Easy File Transfer utility on the first couple, but it does not appear to copy the users AutoCAD settings. When they open AutoCAD for the first time on the new computer, they have to set up all of their toolbars, etc again.
I have even tried copy and paste of theWin 7 AppData Local, LocalLow and Roaming folders ... but even that does not tranfer over the toolbars, menus, etc...
make it so that when a user logs into the new computer and opens AutoCAD, it is exactly as it was on the old computer?
View 1 Replies
View Related
Mar 4, 2011
Map 3d 2011.User A connects to SDE using FDO and creates a dwg containing Mastermap data and other shape files held in SDE.User A saves Map 3D dwg on network drive that all users can access where all acad dwgs, docs etc. for that project are stored.
User B who is working on the same project at another PC tries to open the Map 3D dwg created by user A from the shared network drive but gets a "Failed to open FDO connection" error and cannot open the dwg.
Is this because Map 3D caches all data from SDE on the local drive of the PC on which the dwg was created?Is there a way around this to allow both users to access the same drawings?
View 1 Replies
View Related
Jun 19, 2013
We are currently using Inventor 2013 without Vault and I discovered that multiple users can open the same IPT file at the same time with no warning message or read only access like we get in Autocad. We have 6 designers all using the same Project that is a single user project. We normally don't have more than no person working on the same part or assembly, but it did happen. Two designers opened the same file to make separate changes not knowing that the other was in the file. Not until one of them went to save the file did he know someone else was also in the file. When he went to save the file he then got a warning - "A later version of this file has been saved by (user). Saving the file would overwrite changes, which is not allowed. If you wish to preserve your changes, use the Save Copy As command." In Autocad if you try to open a file that someone else has open you get the warning right away and are forced to open it read only or not at all. Is there a way to set Inventor to do the same thing? Other than using Vault and having to checkin/checkout every file. Our six designers work on an average of 50+ parts per week and many times have multiple files open at the same time to use as reference. Also the shop floor opens our files to use for programming and asking them to checkin/checkout files would not be received well. The shop floor has "read only" rights as determined by our network. Does our network settings determine if more than one person can open the same file?
View 9 Replies
View Related
Aug 10, 2012
My office is running into a printing issue, when different people are plotting off the same drawing file.
I've checked the .CTB file, all of us are using the same file, all .CTB parameters are identical, and no line weights have been set up within the layers, all are set to default, and no transparency has been used.
One man prints the file from AutoCAD2013, on a Windows 7-32bit computer, to our HP Laser Jet 8150N and his drawing comes out light.
I print the same drawing file from AutoCAD2012, on a Windows 7-32bit computer to the same printer with the same .CTB file and my drawing file prints dark. Much darker than his does.
We're having the same issue with other computers here in the office all printing to the same printer using exactly the same .CTB file. I've checked all the versions of Windows, and we're all using Windows 7 32-bit.
The only thing I can think of is that maybe we have different graphics cards as the computers have been purchased at different times.
View 1 Replies
View Related
Apr 23, 2013
We have a number of remote users who must have access to our files via Inventor Viewer. When reviewing the system requirements for Inventor Viewer 2014, I noticed that it lists only Windows 7 and Windows 8. Was XP omitted by mistake, or will Inv Viewer truly not work on machines running XP?
View 6 Replies
View Related
Mar 20, 2013
Within my InventorAddin in vb.net we are trying to force users to a particular folder when they save 3D Parts, Drawings etc.
This 'SaveAs' form does indeed fire, but after the 'Inventor' own 'SaveAs' form window. Can we suppress 'Inventors' window or even change that so it points to our preferred location.?
If we do not do this we are goinf to have 3D Drawings in the Parts folder etc etc.
PrivateSub applicationEvents_OnSaveDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnSaveDocument
If iApplication.ActiveEditDocument.FileSaveCounter = 0 Then
[Code].....
View 1 Replies
View Related
Oct 10, 2012
I developed a program in VBA that used a form to allow users to create new dwg files based on selected criteria the vba program would then create and open the new dwg file and in the case of sheet files, it would populate title block attributes as well.
In vba, the forms focus was carried to the new file so the application would fill in the attributes, etc. as described above,
However in vb.net, I have not been able to get the form to recognize the new file. The program creates and opens the file, however the forms focus is still on the initial file so any actions to be applied to the new file are not carried out.
View 3 Replies
View Related
Mar 19, 2013
We have had this issue now for a couple years and don't know what is causing it. We are using vault pro with admin set single project file. A user can work for months using correct.ipj, then randomly at 10:42 they will notice the active project was been changed to some other temporary project location "c: emp.....". Then it will happen to different users at different times. I cant seem to find any correlation to anything. I can only imagine that it is somehow triggered from the vault addin.
We are inventor 1012 and vault 2012 pro.
View 9 Replies
View Related