AutoCAD Inventor :: Cleaning Up Models By Deleting Obsolete User Parameter
Jul 4, 2012
I have created a large complex assembly that is parametrically driven by a skeletal sketch ipt by means of an embedded excel spreadsheet.
I am cleaning up the models by deleting obsolete user parameters. But there is one that will just not give me the option to delete it.
I have interrogated the model inside and out but can not find anywhere that this parameter is still being used.
I go into the Parameter Dialogue Box (ƒx) and hover the cursor over the parameter and there is nothing that apears that indicates theis parameter is used anywhere in the model.
Is there an iLogic routine or some other method that will allow me to run a check or a search through the model that will point me to where the parameter might still be lingering.
I have attached a JPG if it will make things clearer.
RHRT_1 is the Parameter I am trying to get rid of.
BTW. The Models and Assemblies I create are guarded by Proprietry Laws so I am unable to send a copy to anyone.
Inventor 2012 Professional
View 1 Replies
ADVERTISEMENT
Mar 7, 2012
We are using basic Vault and have some parts that are obsolete or duplicates. We don't currently have the resources to completely replace/purge them in all the assemblies (many of which are old desgns that may never be built again) in which they are used.
Our problem is that engineers keep using these parts in new assemblies and it doesn't get caught until the assemblies are ready to be ordered. Then the assemblies have to be updated, vendors contacted, etc. to correct the situation.
Is there a way to block a part from being used in the first place without deleting it? Or some way to alert the engineer that they are using the wrong part?
View 1 Replies
View Related
Jan 2, 2014
i can easily add user defined properties using Apprentice but i cannot delete them. There is a function to delete but i always get a message back saying the Parameter is Incorrect. When i check the parameter, it IS correct. Any method for deleted User Defined Properties using Apprentice?
View 1 Replies
View Related
Aug 24, 2012
Looking for sample VBA code to get all referenced documents from an assembly and add a boolean user parameter to each (parts and sub assemblies). I have been trying to modify peices of code I have found on this forum and Mod the Machine, but have had no luck so far.
There may also be standard content center parts in the assembly as well that I would like to somehow identify so I can skip over them.
View 1 Replies
View Related
Apr 22, 2013
Most of the time, I delete an user parameter without problem. But, in a part, I got an error for two of them and I don't understand why. I create a new parameter and redirect all dependencies from the old one to the new. (oldParam.Dependencies.Count = 0).
But when I try to delete it, I've got an error. Also, when I try to delete it by the interface, I don't see the Delete option.
View 8 Replies
View Related
Jun 10, 2011
Parameters with a text value, How do I add userParameter? In iLogic
Examples. DoubleValue)
Sub Main()
Dim oCompDef As PartComponentDefinition
oComDef = ThisApplication.ActiveDocument.ComponentDefinition
Dim oParams As Parameters
oParams = oComDef.Parameters
Dim uParams As UserParameters
uParams = oParams.UserParameters
strVal= uParams.AddByExpression!("strVal", 0.15, "mm")
iLogicVb.UpdateWhenDone = True
End Sub
View 6 Replies
View Related
Dec 1, 2013
I need to use the dimension created by an action-parameter as a variable in a user defined function but AutoCAD will not allow me (see attached).
How may I access the action-parameter's dimension ?
View 1 Replies
View Related
Dec 28, 2013
Is it possible to update an existing User Parameter. While I can only delete-create a new. In this case the connection is lost with BOMQuantity.
View 5 Replies
View Related
Aug 6, 2013
I'm having problems with the parameter menu. When I don't have a user parameter linked to a dimension in the model the parameter disappears out of the parameter menu.
View 2 Replies
View Related
Apr 1, 2003
I have a part file ("part1.ipt") that has a user parameter called "Height". When I open this file as a part document, I can modify the "Height" parameter to change the height of the part. This functionality works great:
Set oPartDoc = oApp.Documents.Open(sPartFileName, True)
Set oParameters = oPartDoc.ComponentDefinition.Parameters
'change part height to 30 cm
oParameters.Item("Height").Expression = 30
Now, I am wanting to add this part to an ASSEMBLY document, then change the parameter to 30, but have been unable to do it.
I have this so far:
Dim oAsmCompDef As AssemblyComponentDefinition
Set oAsmCompDef = oApp.ActiveDocument.ComponentDefinition
Dim oOcc As ComponentOccurrence
Set oOcc = oAsmCompDef.Occurrences.Add(sPartFileName, oMatrix)
After I add all the parts, I highlight a part in the assembly pane, I click on FxParameters but I don't see the User Parameters for the part. Are the User Parameters not available when a part is placed into an assembly?
This assembly will have multiple parts added from the same file name, but the "Height" parameter needs to be modified for each occurrence.
View 5 Replies
View Related
May 2, 2013
Is there a way to export a text user parameter?
View 8 Replies
View Related
Feb 7, 2012
it is possible to use a user defined parameter to drive a action parameter.
I have several polar and linear stretch actions i would like to drive from one parameter.
View 3 Replies
View Related
Aug 17, 2011
I am trying to make an iPart of a fitting where I can change the "Body type" and it will change all the parameters associated with that body type through iLogic. Really I am just playing around in iLogic to see if this is something worth learning. Back to the point, I would like to change a multi-value user text parameter through the iPart table but I cannot find the paramter in the parameters tab.
Since it is a user parameter I thought it would be in the "Other" folder but it isn't. I do however have the other multi-value user number parameter in that folder, which makes me think that maybe I can't use the paramter in the iParts table?
INV 2012 SP1
Windows 7 64 Bit
ATI FirePro V5800
14.0 GB RAM
View 9 Replies
View Related
Aug 26, 2010
I created a sketch that I would like to use in an iFeature. The sketch dimensions are controlled with an ilogic rule referencing a multi value text user parameter, eg the text parameter pull down menu controls the size of the part.
Is there an easy way to get this parameter into an ifeature or derived part?
View 4 Replies
View Related
Oct 29, 2012
Macro for writing the sheetmetal Extents width and length to the custom properties. I need to get these values into the part parameters so that they can be used in the BOM.
I can get this to work if I manually create the "SM_Length" user parameter, but how do I make the iLogic CREATE the parameters if they do not already exist? I think it would be something added below the "Catch..." just cant seem to figure out what it needs to be.
'look for custom iproperty and try to set it
Try
iProperties.Value("Custom", sExtLength)=Round(SheetMetal.FlatExtentsLength, iRoundValue)
Parameter("SM_Length")=Round(SheetMetal.FlatExtentsLength,4)
Catch
' assume error means not found and create it
customPropertySet.Add(Round(SheetMetal.FlatExtentsLength,iRoundValue), sExtLength)
EndTry
View 9 Replies
View Related
Jul 29, 2011
I want to use iLogic to create User Parameters with Multi-Value lists filled with info from an excel spreadsheet. What is the code to create a new User Parameter?
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 4 Replies
View Related
May 15, 2012
We are having issues with text height and variations depending on how the text is added.
I am currently adding etching to sheet metal parts by using the user parameters (which are driven by 3rd party source, excel file) and using a cut extrusion -1mm.
We have developed a marco which detects the shape of each letter and adds etching to our sheet metal program manually. We do this to get rid of the double lines when you cut text into a part. Our process is design in Inventor, unfold then convert to DXF 2004, where we import to our SM programming package (Radan).
I have noticed that when using 10mm simplex if the text is driven by parameters and 10 point text is selected the charecter height is 9.9928mm, however if the text is added manually it measures 10mm exactly. Why is this happening? It is probably of no concern to most, but we would need to add extra charecters to our macro to account for the descrepency, and in turn would take the macro longer to run.
When the text is added by user parameters, you can briefly see the 10mm text height flash to 9.99mm when finishing the edit sketch. Changing this to 10mm again has no effect.
what is causing this, or have any alternative ways of adding 10mm simplex single line etching to a dxf from an Inventor 2012 SM part?
View 5 Replies
View Related
Aug 23, 2012
I have a users who cannot change parameter values for iLogic unless user is a local admin on the workstation. This machine has just been upgrade to Inventor 2013.
View 1 Replies
View Related
Nov 1, 2012
I've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
View 1 Replies
View Related
Mar 21, 2013
Where do I find the "Allow custom values" option for a multi list parameter expression?
View 2 Replies
View Related
Jan 3, 2014
IV2012 API with VB:
How can i add an item to a Multi-Value-List of an existing User Parameter in Inventor2012 (Accessing API with Visual Basic) ?
My idea is for example:
uParams.Item(i).ExpressionList.AddItem(As String)
The problem is, that such a function "AddItem" doesn't exist.
View 4 Replies
View Related
Oct 13, 2013
I am setting up a family of parts that consist of a round disc with a fixed OD and a circular pattern of notches cut into the OD. The notches must go to a certain depth from the center, so those parameters are set. My problem is that I need to control the amount of material left between the notches, along the OD, after the pattern is done. Given the fixed parameters of the major OD, minor OD (3.5" in this case) and number of notches, the only way to control the amount of material between notches is to change the angle. When I set up the sketch to do the notches, I can only get a fully constrained sketch if I assign a specific angle to the notch. I need to be able to set it up so that the angle of the notch varies so the end result is a specifc amount of material left after the circular patter is completed.
In the attached PDF, I show what I have done so far. In this case the OD of the part is 4" and the diameter of the notch at it's closest to the center is 3.5". So basically, I end up with a driven parameter of 0.443. If I assign this value the parameter of d14, I need to make it equal to a ratio of another parameter (let's call it d15) so that d14 = d15*2.. This can only be accomplished by changing the angle.
In my family, the major OD and minor OD remain the same, but the angle must change to retain a specific amount of material between the notches when the number of notches is increased or decreased.
Is there an iLogic rule I can write to control this?
View 6 Replies
View Related
Jan 9, 2013
Any way to modify a user form parameter's read only status using a rule?
I have a parameter that I want people to be able to edit when another parameter is set to true and to be locked if it's set to false. The only thing that comes to mind is have a rule that will just switch the value back automatically if the user changes it but it would be good if i could control the read only status.
View 3 Replies
View Related
Oct 6, 2011
We are looking for a workflow example of developing casting models into machining models.
Typically our castings are made from different materials (Fig-1) and then machining (Fig-2) are created from these castings.
Is creating the casting as an iPart (with different materials) and then deriving the machining from the casting the proper method?
Doing it this way seems to force us into making a machining for each casting material instead of just one machining that is an iPart. How should this be set-up for BOM purposes and for use with Vault (Base Version)?
View 3 Replies
View Related
Jun 14, 2013
I am looking for an alternative to in place XRef Edit.
The third party software I am stuck with has disabled in place editing an Xref.
The specific application I need is to allow the user to move an intelligent room tag that is XReffed into discipline specific models. Disciplines are Architectural, Mechanical, Electrical..Etc. Each discipline has their own room tag and needs to move their own tag to a location that can be clearly seen on their finished plot. Xref edit in place is the perfect tool for this..But since the third party has disabled the command, I need an alternative method.
View 9 Replies
View Related
Jun 24, 2012
I'm trying to vault of one my parts and it refuses to upload. It's refusing to upload because the part keeps refering to a certain bitmap image. I have removed the reference (from the styles library) to the bitmap image but it's still calling for it to be uploaded!
How can I find out why this part still calls for this bitmap image? Why is it still making reference to it even after I have deleted the style which uses it?
View 4 Replies
View Related
Feb 13, 2012
We have some dnyamic block share set of parameters, if we change a parameter's value, all block that reference this parameter should be change.we can do it by program.
but create user parameters for a dynamic block must be by hand, can we create a user parameter by code? another way is user global parameter. does AutoCAD Parametric function's user value can be share with dynamic block?
View 8 Replies
View Related
Sep 25, 2012
I would like to add a new (user) parameter to a dynamic block within my code. I have noticed that this is possible manually. But couldn't find how to do this in .Net. When this parameter has been created it would be necessary to fill in a value. So the parameter can either be a general parameter, that can be adjusted later or a (user/dynamic) parameter specific for the block.
View 1 Replies
View Related
Apr 9, 2012
I'm trying to connect the value given by a calculated User parameter to a text. I've been looking for information everywhere, none found. Is it possible to show that value in a multiline text?
View 1 Replies
View Related
Jul 18, 2013
I made a bunch of custom brushes and created a new brush library for each group in Illustrator 5.5. A couple of libraries are basically dupes and I no longer need them.
Is there a way to delete the "whole" user defined library pallet.
View 4 Replies
View Related
Dec 23, 2011
I have user parameters that are no longer needed and are not being used anywhere. They each takes 4-5 seconds to delete, prior to 2012 this would happen instantly.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
View 6 Replies
View Related
