I'm having problems with the parameter menu. When I don't have a user parameter linked to a dimension in the model the parameter disappears out of the parameter menu.
View 2 Replies
I have created a multi-value parameter in a part and exported it. I then linked it in the assembly but I am unable to edit it. I tried using iLogic but it also does not alter the part. Please see the attached 3 jpegs.
View 9 Replies View RelatedI made an assembly that adjusted to sized based on some key parameters. These key parameters are controlled by a form in the main assembly. The keys parameters actually adjust the skeleton file, which then drives the frame, then all the parts are adjusted.
after changing these parameters all necessary parts would adjust to size and keep the location constraints. Worked quite well.
The issue now is that, we adopted a new naming convention and this assembly requires all the part files to be renamed. I meticulously saved each part as their new name and then replaced each component in the main assembly. This worked to an extent. The problem that I am facing is that when I saved each part as there new name, the new part retained the linked parameters to the old part. Is there a way to change this link to the newly name skeleton file?
I looked into design assistant for this process as well, but the only changes I think available were to add a prefix or suffix. If worse comes to worse, I can remodel this project but, I am sure there has to be a way to alter this.
attached is a single part with those parameters in the image above.
Looking for sample VBA code to get all referenced documents from an assembly and add a boolean user parameter to each (parts and sub assemblies). I have been trying to modify peices of code I have found on this forum and Mod the Machine, but have had no luck so far.
There may also be standard content center parts in the assembly as well that I would like to somehow identify so I can skip over them.
Most of the time, I delete an user parameter without problem. But, in a part, I got an error for two of them and I don't understand why. I create a new parameter and redirect all dependencies from the old one to the new. (oldParam.Dependencies.Count = 0).
But when I try to delete it, I've got an error. Also, when I try to delete it by the interface, I don't see the Delete option.
Parameters with a text value, How do I add userParameter? In iLogic
Examples. DoubleValue)
Sub Main()
Dim oCompDef As PartComponentDefinition
oComDef = ThisApplication.ActiveDocument.ComponentDefinition
Dim oParams As Parameters
oParams = oComDef.Parameters
Dim uParams As UserParameters
uParams = oParams.UserParameters
strVal= uParams.AddByExpression!("strVal", 0.15, "mm")
iLogicVb.UpdateWhenDone = True
End Sub
I need to use the dimension created by an action-parameter as a variable in a user defined function but AutoCAD will not allow me (see attached).
How may I access the action-parameter's dimension ?
Is it possible to update an existing User Parameter. While I can only delete-create a new. In this case the connection is lost with BOMQuantity.
View 5 Replies View RelatedI have a part file ("part1.ipt") that has a user parameter called "Height". When I open this file as a part document, I can modify the "Height" parameter to change the height of the part. This functionality works great:
Set oPartDoc = oApp.Documents.Open(sPartFileName, True)
Set oParameters = oPartDoc.ComponentDefinition.Parameters
'change part height to 30 cm
oParameters.Item("Height").Expression = 30
Now, I am wanting to add this part to an ASSEMBLY document, then change the parameter to 30, but have been unable to do it.
I have this so far:
Dim oAsmCompDef As AssemblyComponentDefinition
Set oAsmCompDef = oApp.ActiveDocument.ComponentDefinition
Dim oOcc As ComponentOccurrence
Set oOcc = oAsmCompDef.Occurrences.Add(sPartFileName, oMatrix)
After I add all the parts, I highlight a part in the assembly pane, I click on FxParameters but I don't see the User Parameters for the part. Are the User Parameters not available when a part is placed into an assembly?
This assembly will have multiple parts added from the same file name, but the "Height" parameter needs to be modified for each occurrence.
Is there a way to export a text user parameter?
View 8 Replies View Relatedit is possible to use a user defined parameter to drive a action parameter.
I have several polar and linear stretch actions i would like to drive from one parameter.
I am trying to make an iPart of a fitting where I can change the "Body type" and it will change all the parameters associated with that body type through iLogic. Really I am just playing around in iLogic to see if this is something worth learning. Back to the point, I would like to change a multi-value user text parameter through the iPart table but I cannot find the paramter in the parameters tab.
Since it is a user parameter I thought it would be in the "Other" folder but it isn't. I do however have the other multi-value user number parameter in that folder, which makes me think that maybe I can't use the paramter in the iParts table?
INV 2012 SP1
Windows 7 64 Bit
ATI FirePro V5800
14.0 GB RAM
I created a sketch that I would like to use in an iFeature. The sketch dimensions are controlled with an ilogic rule referencing a multi value text user parameter, eg the text parameter pull down menu controls the size of the part.
Is there an easy way to get this parameter into an ifeature or derived part?
Macro for writing the sheetmetal Extents width and length to the custom properties. I need to get these values into the part parameters so that they can be used in the BOM.
I can get this to work if I manually create the "SM_Length" user parameter, but how do I make the iLogic CREATE the parameters if they do not already exist? I think it would be something added below the "Catch..." just cant seem to figure out what it needs to be.
'look for custom iproperty and try to set it
Try
iProperties.Value("Custom", sExtLength)=Round(SheetMetal.FlatExtentsLength, iRoundValue)
Parameter("SM_Length")=Round(SheetMetal.FlatExtentsLength,4)
Catch
' assume error means not found and create it
customPropertySet.Add(Round(SheetMetal.FlatExtentsLength,iRoundValue), sExtLength)
EndTry
I want to use iLogic to create User Parameters with Multi-Value lists filled with info from an excel spreadsheet. What is the code to create a new User Parameter?
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I set a dimension to a 2dline. The dimension is automatically added to Model Parameters. How can I find , by code, the line which length is driven by the parameter ? Or, starting from the line find the parameter which indicate its length ?
::GetDependents(), nor ::GetDrivenBy(), nor ::GetParent() gives me the answer.
We are having issues with text height and variations depending on how the text is added.
I am currently adding etching to sheet metal parts by using the user parameters (which are driven by 3rd party source, excel file) and using a cut extrusion -1mm.
We have developed a marco which detects the shape of each letter and adds etching to our sheet metal program manually. We do this to get rid of the double lines when you cut text into a part. Our process is design in Inventor, unfold then convert to DXF 2004, where we import to our SM programming package (Radan).
I have noticed that when using 10mm simplex if the text is driven by parameters and 10 point text is selected the charecter height is 9.9928mm, however if the text is added manually it measures 10mm exactly. Why is this happening? It is probably of no concern to most, but we would need to add extra charecters to our macro to account for the descrepency, and in turn would take the macro longer to run.
When the text is added by user parameters, you can briefly see the 10mm text height flash to 9.99mm when finishing the edit sketch. Changing this to 10mm again has no effect.
what is causing this, or have any alternative ways of adding 10mm simplex single line etching to a dxf from an Inventor 2012 SM part?
I have a users who cannot change parameter values for iLogic unless user is a local admin on the workstation. This machine has just been upgrade to Inventor 2013.
View 1 Replies View RelatedI have created a large complex assembly that is parametrically driven by a skeletal sketch ipt by means of an embedded excel spreadsheet.
I am cleaning up the models by deleting obsolete user parameters. But there is one that will just not give me the option to delete it.
I have interrogated the model inside and out but can not find anywhere that this parameter is still being used.
I go into the Parameter Dialogue Box (ƒx) and hover the cursor over the parameter and there is nothing that apears that indicates theis parameter is used anywhere in the model.
Is there an iLogic routine or some other method that will allow me to run a check or a search through the model that will point me to where the parameter might still be lingering.
I have attached a JPG if it will make things clearer.
RHRT_1 is the Parameter I am trying to get rid of.
BTW. The Models and Assemblies I create are guarded by Proprietry Laws so I am unable to send a copy to anyone.
Inventor 2012 Professional
I've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
Where do I find the "Allow custom values" option for a multi list parameter expression?
View 2 Replies View RelatedIV2012 API with VB:
How can i add an item to a Multi-Value-List of an existing User Parameter in Inventor2012 (Accessing API with Visual Basic) ?
My idea is for example:
uParams.Item(i).ExpressionList.AddItem(As String)
The problem is, that such a function "AddItem" doesn't exist.
I am setting up a family of parts that consist of a round disc with a fixed OD and a circular pattern of notches cut into the OD. The notches must go to a certain depth from the center, so those parameters are set. My problem is that I need to control the amount of material left between the notches, along the OD, after the pattern is done. Given the fixed parameters of the major OD, minor OD (3.5" in this case) and number of notches, the only way to control the amount of material between notches is to change the angle. When I set up the sketch to do the notches, I can only get a fully constrained sketch if I assign a specific angle to the notch. I need to be able to set it up so that the angle of the notch varies so the end result is a specifc amount of material left after the circular patter is completed.
In the attached PDF, I show what I have done so far. In this case the OD of the part is 4" and the diameter of the notch at it's closest to the center is 3.5". So basically, I end up with a driven parameter of 0.443. If I assign this value the parameter of d14, I need to make it equal to a ratio of another parameter (let's call it d15) so that d14 = d15*2.. This can only be accomplished by changing the angle.
In my family, the major OD and minor OD remain the same, but the angle must change to retain a specific amount of material between the notches when the number of notches is increased or decreased.
Is there an iLogic rule I can write to control this?
Any way to modify a user form parameter's read only status using a rule?
I have a parameter that I want people to be able to edit when another parameter is set to true and to be locked if it's set to false. The only thing that comes to mind is have a rule that will just switch the value back automatically if the user changes it but it would be good if i could control the read only status.
know if I can drive the length of a shaft based on two iMates being satisfied? We'll take a driveshaft for example. If, using iMates, I make it connect to the transmission yoke and to the axle yoke, can the Length parameter automatically be changed so it fits?
View 9 Replies View RelatedAny program that allows you to trace a parameter or dimension throughout the entire data set, showing what files it's used in and maybe even gives a family tree of embeds?
Same for tracing ipt and iam files in the entire data set.
What is the data type for the second parameter of retrieve dimension method? Coz it's optional parameter.Retrieve(ViewOrSketch as Object, [DimensionToRetrieve]) as GeneralDimensionEnurator
We've tried to put the parameter name of the model as parameter but error had occured "DATA TYPE MISMATCH".Here's our
Call osheetDetail.DrawingDimensions.GeneralDimensions.Retrieve_(oTopView,oModel.ComponentDefinition.Parameters.Item(10).Name)
if it is possible to increase the number of recently used values/parameters in the dimension dialog, during part sketching. For one part, I use approximately ten parameters that will be used repeatedly. When I'm done with one sketch and start with the next, only the last five parameters are in the recently used parameter list. (Create dimension --> select arrow on right side of dialog, see attachment Dimension_Dialog.jpg, excuse me for the poor quality ). It would be much more comfort to have more parameters in this 'recently used'-list.
Furthermore I'd like to know if it's possible to widen the parameter-list. In my case I've several parameters that start with the same prefix, followed by a differentiating suffix. When I create a new dimension, select the arrow on the right and select 'List Parameters', I have to adjust the width of this dialog every time to see the entire parameter. (see picture Dimension_parameters.jpg)
We have some dnyamic block share set of parameters, if we change a parameter's value, all block that reference this parameter should be change.we can do it by program.
but create user parameters for a dynamic block must be by hand, can we create a user parameter by code? another way is user global parameter. does AutoCAD Parametric function's user value can be share with dynamic block?
I would like to add a new (user) parameter to a dynamic block within my code. I have noticed that this is possible manually. But couldn't find how to do this in .Net. When this parameter has been created it would be necessary to fill in a value. So the parameter can either be a general parameter, that can be adjusted later or a (user/dynamic) parameter specific for the block.
View 1 Replies View RelatedI'm trying to connect the value given by a calculated User parameter to a text. I've been looking for information everywhere, none found. Is it possible to show that value in a multiline text?
View 1 Replies View Related
