I am trying to simplify find tool as filter in AutoCAD in Inventor(please find attachment img1) as shown in img3 creating a user form and selecting entities with category property straight away.
View 9 RepliesDid the ability to add multiple envelopes to a single part not make it to 2014? In the demo video from Autodesk it shows you can do that but I don't see that button in 2014?
Running 2014 Product Design Suite Ultimate
Windows 7 64 bit
90G OCZ SATA 3 SSD (My SSD is faster than your HDD)
Core I7 920 processor, ATI HD6970 graphics card, 12G Corsair RAM
I've been trying to use symmetry to simplify a finite element model. Why I see different stress results in these two instances.
Simulation 1: Rectangular Hollow Section, capped at both ends, subject to internal pressure
Simulation 2: Half model i.e. RHS split down the middle lengthwise, with a frictionless constraint applied to the split plane.
Actual problem I want to analyze is a bit more complicated and I was hoping to use symmetry to reduce the processing time?
I just loaded inventor 2013 for student.I have tried to set up my key broad with some shortcut keys. When I right cick in the ribbon I do not get any way to get to optiongeneral tools.
View 4 Replies View RelatedI am trying to find a filter using CS4 that enables me to produce the exaggerated line "scratchy" effect. The photo below is an example of the effect. It would be used on parallel lines criss-crossing each other. I haven't been able to find anything similar. I've already tried the smudge tool, rough pastels, and wind. But, the effect isn't strong enough. Is there another filter out there? I've also already looked at the filters on Adobe Community page.
View 3 Replies View RelatedIs there an Adjustment Tool or Graduated Filter Tool in Camera Raw for Photoshop Elements 12?
View 2 Replies View RelatedI have downloaded a trial version of PS. I am following a tutorial which I think has been carried out on a MAC. I have a PC. In the tutorial, the teacher selects Filter > Artistic > Palette knife...
On my version I have Filter > but then there is no option for Artistic. Is this located elsewhere or is the trial version not a complete version? I noticed 2 versions were downloaded onto my PC - Photoshop CC and Photoshop CC (64bit). Is this part of the issue?
I want to make a normal map with Gimp.
All the tutorials say go to Filters>Map>Normal Map This option doe not show in my Gimp.
Is this an error? Do I need a plugin?
I cannot seem to find the Diffuse Glow filter in CC. I have been using PS for years and have always seen it under the filter, distort, diffuse glow.
View 1 Replies View Relatedtrying to achieve this type of effect, a 2 color on a photo. But I cant seem to find the filter to get it right.
View 1 Replies View RelatedI may be missing something entirely obvious, (indeed I often do), but I cant discover a way of using filters so I can see a dsiplay of pictures which I have not assigned to a collection?
View 2 Replies View RelatedI am on a PC, Windows 7 and CS5.5 Creative Suite in 64bit. I have downloaded pixelbenderplugin_p3_pscs5-1_64bit_061711.mxp
I have run Extension Manager as Administrator
Yet still Pixel Binder does not show up in my Filters List.
I recently upgrade from PSE 9 to PSE 12. I like the difference in the user interface but cannot find Lighting Effects in Filter/Render.
View 3 Replies View RelatedI have a long text (using special true type fonts) exploded using the express tools. Problem is that, for example, an "O" became made by a lot of straight lines. So my file becomes heavy weight, and that file has tube cut using a laser. So how can I simplify that text/lines?
View 6 Replies View RelatedAfter installation of PS CC I have not been able to find Shake Reduction filter among Sarpen filters.
View 3 Replies View Relatedwhere is the option to modify the quality of a surface tham I'm displaying?
For instance if I zoom out, it looks with less polygons, if I zoom in it looks with more polygons.
I've downloaded today some DEM Surfaces with an area of an entire city, and the civil 3d is simplifing automatically the surface... I gave a friend the same surface and on his civil 3d it works very bad without simplifing the surface at all.
I guess there has to be a switch somehere? Civil Engineer / Infrastructure of metropolitan transports [URL]
I cant seem to find filter select or a list view for the record area. Both of these functions come in handy on feature films and episodic television especially vfx heavy shows.
View 2 Replies View RelatedI've recently installed auto cad 2007lt on our new computer. I set up numerous tool palettes with blocks that we use often. I was pulling images from the palettes to my drawing with no problem.
Today when I tried inserting an image from the tool palette it is saying that the image can not be found. I've tried under previous drawings and new templates and have been unsuccessful.
I just downloaded Gimp yesterday and it is way different than the version I had on my last computer. I have things figured out for the most part, the main function I can't seem to find is how to "Simplify" paths. It seems like I used to use CTRL L or something like that and it would smooth out my lines a bit.
View 3 Replies View RelatedWhen I'm trying to use the graduated filter tool in 3.5 I don't end up with the lines or the marker to adjust it after I've applied it, the line and marker don't show up while I'm applying the filter and aren't there afterward either. Is there some place I need to select that as how it's shown? Also, I have a windows 7 laptop that meets the requirements for running lightroom but I'm having trouble with it not running very fluid-ly. That is if I move a slider to make an adjustment it doesn't apply it while I'm doing that it takes quite a few seconds and then applies it, which leaves me really all over the place trying to make fine little adjustments. It takes it's time to load photos and such which really isn't a big deal to me but for the little movements of the sliders or the curves I really would like to see what it's doing as it's doing it. If I had a more powerful laptop (or desktop but at this stage of my life I prefer laptop) would that improve that?
View 3 Replies View Related tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
I have aerial photos that I'm going to be using in a map project. Basically, I want to take out all the distracting detail of the aerial photos. The end product should be have a very nuetral color for default, a tree textured light green (forests) and a rock textured gray for rock out croppings ....
View 4 Replies View RelatedI am using PS 8 on a Powerbook G4, with other apps such as InDesign CS and i-photo, sometimes printing from a B/W laser printer and doing color with an Epson Stylus Photo RX 600, also scanning from the Epson and photos from two different brands of digital cameras (Casio pocket camera and Olympus standard size).
Color management is a PAIN in the patoot. Every different project demands figuring out a different workflow for color management.
Is color management improved by (easier with) later versions of PhotoShop and/or InDesign? That would be my only reason to upgrade, but if it works I would do it. The printer does fantastic work WHEN I GET THE WORKFLOW RIGHT for the particular project.
I'm making a picture and I have a problem - I need a maximum of 2000 anchor points, and I have about 11k.
Seems like I have a lot of unnecessary points, but when I try to simplify the picture gets all messed up. Any other way to fix this?
Here's part of the picture, you can clearly see that a lot of the points don't have to be there..
Using CS5. I have a solid shape with a hollowed center (see far left image). I applied a transform effect to make it look "3D" by offsetting it slightly 32 times (see middle image. see far right image to see what it looks like selected). I want to simply have the middle image, but without all the paths and lines - I just I want it outlined. I tried to expand it, group it, pathfinder-add - nothing seems to work.
View 12 Replies View RelatedWhen I use the simplify tool I get a small loop added to some corners of closed paths. It's such a great tool for what I do but it's basically useless like this.
The original
After applying simplify:
And zoomed in to a few of the corners:
What is the difference between the Smooth and Simplify tools? Is the Smooth tool the same as Simplify but without the dialog window to set the parameters?
View 3 Replies View RelatedI updated my PS to 13.03. I saw an Adobe video saying now Liquify Tool can have a smart filter so I want to give it a try. I couldn't get my Smart Filter working for Liquify Tool.
I converted my RGB image to Smart Filter under Filter menu. I then tried to choose Liquify Tool but this option is disabled. Is my version 13.03 still not up-to-dated.
I've been seeing screenshots all over the place of Lightroom 5 that displays a number of tools under the Radial Filter, including one for moire. That's a big part of why I decided to join Creative Cloud, but in my version of Lightroom 5, there is no such tool.
View 6 Replies View RelatedI used to use a tool in PS 5.5 that I can't find in PS7. I believe you would select an area, then you could mirror that area onto a different part of the picture, and it even gave you a display window showing you the original area you selected. Does anyone know what this tool is called and where it's located in Photoshop 7?
View 8 Replies View RelatedI want to simplify part of a complex shape. Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points?
View 8 Replies View Related