I am trying to apply a load lengthwise on a 2 x 2 x 3/16 angle at the center of gravity using "stress analysis" in inventor pro 2014, but it won't let me apply the load at this point. I know that the load would be floating in the air at the center of gravity, could this be the issue?
View 5 RepliesI can obtain the Center of Gravity of a sub-assembly. What are the values with respect to? The origin/root of the whole assembly or the origin of the sub-assembly? How can I obtain the coordinate of the COG of a sub-assembly with respect to its origin or with respect to the whole assembly's origin?
View 9 Replies View RelatedHow do I get the center of gravity to work, by measuring a distance from the origin like Solidworks? I select the “Physical” Tab under the iProperties “Center of Gravity” and it gives me” lbmass”? Also is there a way for it to show on the screen?
View 3 Replies View RelatedI have a LOD in my assembly to suppress some of the components. In the assembly, it looks like the center of gravity is correct for the LOD. Now I place this assembly in an idw with the LOD active. Now I right-click on the assembly in the idw and choose "Center of Gravity". The center of gravity shown here does not represent the center of gravity for this LOD. The CG shown represents the CG of the master LOD.
Is it possible to get the center of gravity to show on the idw that represent the CG of an LOD?
Structural shape authoring has a parameter mapping for the center of gravity. What values should these be for a C channel where the part origin is at the geometric center and the center of gravity is located along the negative X axis? I checked one of the channels in content center - it had the origin located at the center of gravity and the parameter mapping was the distance to the outer web surface (positive), with the web located in the negative X direction.
View 1 Replies View RelatedHow can see visually the center mass of a part or assembly?
When I'm checking in the Iprop., I see the center of gravity coordinates, but it there a way to "see" it (some visual representation)
Inventor 2012 Pro.
I7 workstation
For some reason it will not let me constrain a part to the center of gravity plains. I would like to constrain lifting lugs to the center of gravity so the model will automatically update itself. Is there anyway to make this work (using ilogic or anything)?
Why would Inventor tease me with showing me the center of gravity plains in an assembly but making them completely useless?
I have created assembly (lets call it main assembly) in which there are 4 other assemblies (lets call them sub assemblies).
Now in the main assembly document i want to display center of gravity of each of the sub assembly.
When i open each of the sub assemblies and turn on center of gravity of each of them, when returning to main assembly view it displays center of gravity of main assembly, not of each of the sub assemblies.
Im asking for this because i want to create a drawing of main assembly and add dimensions of each of the sub assembly centers of gravity and unfortunatly just as in assembly view, when i want to display center of gravity i can do it only for the main assembly not for each of sub assemblies.
I am currently trying to show a comparison of Center of Gravity between two assembly's. One is the original state and the other has counter weight bars. I know how to get the COG to show on my drawings, but both COG locations are the same in my drawings (but different in my assembly) My problem is when I create View Representations and I toggle the Counter Weight bars off, the COG in my drawing still remains in the same location as if they were still on. I know the hard way of accomplishing my task would be to save 2 seperate models (one with Counter Weights and one without). But I would like to take full advantage of the Representation Option. Using IV 2012 Pro.
View 4 Replies View RelatedHow on earth do you show the COG on a drawing in inventor 2011?
View 2 Replies View RelatedI am trying to retrieve center of gravity in my assembly, I now already coordinates given by iporoperties, now i want to measure to that specific point, is it possible to do it? or to actually show the center of gravity in the assembly?
View 1 Replies View RelatedI am trying to pinpoint the center of gravity on a curved face of an assembly. I can use the c og G command to get the true center of gravity but i would like to incorporate lifting eyes into the finished assembly. Basically I need to know how to find the C of G on a given surface. I have attached the assembly I am working on and added lifting eyes roughly where I would like them. I have tried measuring from the C of G to a face and then creating the lug above the C of G but somehow it doesn't line up.
View 7 Replies View RelatedOk received parts from a customer. It was ALL mesh features.I converted some of them(the mesh features) to Solids. Some would not convert to solids (converted to surfaces).
I need to have the COG show up correctly. Yes, I have a physical COG. I know where it is supposed to be.
I am trying to use this and several other parts (with mixed, Solids, Surfaces, Mesh features), in an assembly AND balance it all thru a common lift point.
How can I correct the COG of the individual parts, so that the assembly is correct.
I have work planes for the corrected COGs, but I am afraid that I will need to calculate the new COG for the assebmly.
In the iProperties, in the Mass properties are the coordinates of the center of gravity. i guess they relate to the center point and axes in the main origin folder, right?
How can i show and measure from the genter of gravity symbol in parts and drawings?
I'm trying to build a VBA code in inventor 2010 to export the Center of gravity coordinates (X,Y,Z) from an inventor assembly to an excel sheet.
But I'm not able to get the iproperties for the COG from my assembly.
I'd like to know how inventor defines the center of rotation when you apply moment load on multiple faces at once. I'm not basically able to define where exactly I need that axis to be. and I dont understand where inventor assumes that axis is. if you take a look at attached model, obviously the resultant forces caused by the applied moment are bigger on the single pillar located on the extention, thats why its been displaced more than the others, but where exactly is center of rotation. I'm trying to avoid modeling of the section above this which technically transfers the moment thorough shear pins on the structure I have modeled.
View 5 Replies View Relatedis it possible in AUTOCAD to know the CENTER OF GRAVITY OF A VEHICLE?
View 6 Replies View RelatedI have tried just about everything and the mass properties center point of gravity is coming out incorrect.
I have created a box 300x300x300 with the center of the box at 0,0,0 (for testing the cg) . The result I get is not 0,0,0 one of the values always comes out to be not zero, depending on the orientation of the box. Is this a bug?
Dim cg As Point3d = T.MassProperties.CentroidMsgBox(cg.X & vbCr & cg.Y & vbCr & cg.Z)
Is there a command within AutoCAD2000 to establish the centre of gravity of a solid or solids?
View 7 Replies View RelatedThe content center is completely empty on 3 different seats of Autodesk Inventor 2014. They all had the content center and it was working perfectly until a random moment and they all went empty at different times. Two of these seats were upgraded from 2013 while the other was a fresh installation. We do not use the vault and on my main computer, the items I marked as favorites are still able to be seen, but only available as custom parts each time.
There are 4 other seats here with Inventor installed and the content center is working, should I expect them all to vanish as well? How can I get it back?
I installed Inventor 2014 some months ago and have been working with the content center on a regular basis. I recently went on a business trip and when I got back my content center library dialog is completely blank.
I can not figure out what could possibly have happens to the installation settings to cause this.
Was working fine yesturday, I place about 100 components, no problem.
Then suddenly I crash to desktop at least 90 percent of the time when I select "place from content center" it starts to load then, desktop.
Windows 7 Pro.
Is there a way that the Info Center is not available ? Registry ? XML confoguration ?
It is possible to disable the communication center, but the for whole Info center I can find no way ?
We have installed Inventor on 1000 client WS and the INfo center is not needed ?
I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine. I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.
I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx. I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library. I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled. So far, so good.
After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder. Using and expression, I've modified the string values of the just created DESCRIPTION column. I've elected to map DESCRIPTION to the Project.Description iProperty. I use the OK button and each row in the new column gets populated. Update Lightning Bolts are displayed at the far left of the dialog box.
I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members. I've checked the file names and I see nothing that's repeating. I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?
Inventor 2012 Certified Associate
AutoCAD 2012 Certified Associate
Product Design Suite Ultimate 2012, 2013 & 2014...Other than THAT, Mrs. Lincoln, how was the play? Where we send more Govenors to prison, than on to retirement!
Publishing parts to C Center or Editing tables in C Center Crashes Inventor Prof 2014
Before i say anything let me say that this problem occured last night.Was always there as i had not used the feature before in 2014. I uninstalled ONLY Inventor from the suite and re installed. It worked !!
Tonight i was publishing new parts and then Inventor crashed. Since its crashed again i cant publish or edit part family tables to make additions etc with Inventor crashing.
I believe something has corrupted again within the Inventor 2014 install and i dont know what.
Im looking for some pointers as i dont really feel like uninstalling and reinstalling Inventor to fix it.
I have cleared the cache from users folders etc. Im guessing i need to clear some thing else as well. This crashes in both Vault and local CC files.
I just installed AutoCAD 2014, but it's not pulling my custom .pgp file, even though the folder that file is in is first in my support path.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
Is this type of gravity experiment possible with dynamic simulation?
[URL].........
I made the cone ramp and double cone but the cone either goes the wrong way or only moves a few inches in the correct direction and then gets stuck. I’m using 3D Contact Joints and Spatial Joints and Gravity Force.
Version = Inventor Pro 2009
How to set a pivot point to the CENTER of a 3D object in AutoCAD 2014?
View 3 Replies View RelatedIm trying to figure out if Inventor's dynamic simulation can simulate gravity on rope or cable shaped solids.
I have a power cord design that I want to display with its cords in various natural positions (IE Flat on a table, hanging from a wall, etc). (see image attached)
My questions are as follows:
1. Can dynamic simulation simulate a rope/cable type object falling with gravity to a natural hanging position?
2. If it can, can I also then save the resulting new shape/model and export it to showcase for rendering (or render within Inventor)?
3. I am currently creating the cords using the sweep command. Using this seems like it may cause problems for the simulation. If I use the wiring harness design part of inventor to create the power cables can it then simulate the cables naturally falling and resting due to the forces of gravity? I know the wiring harness design area is built in, but I have never even opened it before..
I wonder how to convert the centre of gravity of a part into a work point.
View 4 Replies View RelatedSuddenly Maya's import/export/open file dialogue box has become extremely slow, taking forever to browse thru folders, freezing in the process.
This is independently of file/scene size. Specs are Ok. CPU i7-4930k, 16gb RAm, Geforce GTX 780, running windows 8.1 with a Kingston SSD and a second 3tb Caviar Green HD.