I can obtain the Center of Gravity of a sub-assembly. What are the values with respect to? The origin/root of the whole assembly or the origin of the sub-assembly? How can I obtain the coordinate of the COG of a sub-assembly with respect to its origin or with respect to the whole assembly's origin?
View 9 RepliesHow do I get the center of gravity to work, by measuring a distance from the origin like Solidworks? I select the “Physical” Tab under the iProperties “Center of Gravity” and it gives me” lbmass”? Also is there a way for it to show on the screen?
View 3 Replies View RelatedI have a LOD in my assembly to suppress some of the components. In the assembly, it looks like the center of gravity is correct for the LOD. Now I place this assembly in an idw with the LOD active. Now I right-click on the assembly in the idw and choose "Center of Gravity". The center of gravity shown here does not represent the center of gravity for this LOD. The CG shown represents the CG of the master LOD.
Is it possible to get the center of gravity to show on the idw that represent the CG of an LOD?
Structural shape authoring has a parameter mapping for the center of gravity. What values should these be for a C channel where the part origin is at the geometric center and the center of gravity is located along the negative X axis? I checked one of the channels in content center - it had the origin located at the center of gravity and the parameter mapping was the distance to the outer web surface (positive), with the web located in the negative X direction.
View 1 Replies View RelatedHow can see visually the center mass of a part or assembly?
When I'm checking in the Iprop., I see the center of gravity coordinates, but it there a way to "see" it (some visual representation)
Inventor 2012 Pro.
I7 workstation
For some reason it will not let me constrain a part to the center of gravity plains. I would like to constrain lifting lugs to the center of gravity so the model will automatically update itself. Is there anyway to make this work (using ilogic or anything)?
Why would Inventor tease me with showing me the center of gravity plains in an assembly but making them completely useless?
I have created assembly (lets call it main assembly) in which there are 4 other assemblies (lets call them sub assemblies).
Now in the main assembly document i want to display center of gravity of each of the sub assembly.
When i open each of the sub assemblies and turn on center of gravity of each of them, when returning to main assembly view it displays center of gravity of main assembly, not of each of the sub assemblies.
Im asking for this because i want to create a drawing of main assembly and add dimensions of each of the sub assembly centers of gravity and unfortunatly just as in assembly view, when i want to display center of gravity i can do it only for the main assembly not for each of sub assemblies.
I am currently trying to show a comparison of Center of Gravity between two assembly's. One is the original state and the other has counter weight bars. I know how to get the COG to show on my drawings, but both COG locations are the same in my drawings (but different in my assembly) My problem is when I create View Representations and I toggle the Counter Weight bars off, the COG in my drawing still remains in the same location as if they were still on. I know the hard way of accomplishing my task would be to save 2 seperate models (one with Counter Weights and one without). But I would like to take full advantage of the Representation Option. Using IV 2012 Pro.
View 4 Replies View RelatedHow on earth do you show the COG on a drawing in inventor 2011?
View 2 Replies View RelatedI am trying to retrieve center of gravity in my assembly, I now already coordinates given by iporoperties, now i want to measure to that specific point, is it possible to do it? or to actually show the center of gravity in the assembly?
View 1 Replies View RelatedI am trying to apply a load lengthwise on a 2 x 2 x 3/16 angle at the center of gravity using "stress analysis" in inventor pro 2014, but it won't let me apply the load at this point. I know that the load would be floating in the air at the center of gravity, could this be the issue?
View 5 Replies View RelatedI am trying to pinpoint the center of gravity on a curved face of an assembly. I can use the c og G command to get the true center of gravity but i would like to incorporate lifting eyes into the finished assembly. Basically I need to know how to find the C of G on a given surface. I have attached the assembly I am working on and added lifting eyes roughly where I would like them. I have tried measuring from the C of G to a face and then creating the lug above the C of G but somehow it doesn't line up.
View 7 Replies View RelatedOk received parts from a customer. It was ALL mesh features.I converted some of them(the mesh features) to Solids. Some would not convert to solids (converted to surfaces).
I need to have the COG show up correctly. Yes, I have a physical COG. I know where it is supposed to be.
I am trying to use this and several other parts (with mixed, Solids, Surfaces, Mesh features), in an assembly AND balance it all thru a common lift point.
How can I correct the COG of the individual parts, so that the assembly is correct.
I have work planes for the corrected COGs, but I am afraid that I will need to calculate the new COG for the assebmly.
In the iProperties, in the Mass properties are the coordinates of the center of gravity. i guess they relate to the center point and axes in the main origin folder, right?
How can i show and measure from the genter of gravity symbol in parts and drawings?
I'm trying to build a VBA code in inventor 2010 to export the Center of gravity coordinates (X,Y,Z) from an inventor assembly to an excel sheet.
But I'm not able to get the iproperties for the COG from my assembly.
is it possible in AUTOCAD to know the CENTER OF GRAVITY OF A VEHICLE?
View 6 Replies View RelatedI have tried just about everything and the mass properties center point of gravity is coming out incorrect.
I have created a box 300x300x300 with the center of the box at 0,0,0 (for testing the cg) . The result I get is not 0,0,0 one of the values always comes out to be not zero, depending on the orientation of the box. Is this a bug?
Dim cg As Point3d = T.MassProperties.CentroidMsgBox(cg.X & vbCr & cg.Y & vbCr & cg.Z)
Is there a command within AutoCAD2000 to establish the centre of gravity of a solid or solids?
View 7 Replies View RelatedIs this type of gravity experiment possible with dynamic simulation?
[URL].........
I made the cone ramp and double cone but the cone either goes the wrong way or only moves a few inches in the correct direction and then gets stuck. I’m using 3D Contact Joints and Spatial Joints and Gravity Force.
Version = Inventor Pro 2009
Im trying to figure out if Inventor's dynamic simulation can simulate gravity on rope or cable shaped solids.
I have a power cord design that I want to display with its cords in various natural positions (IE Flat on a table, hanging from a wall, etc). (see image attached)
My questions are as follows:
1. Can dynamic simulation simulate a rope/cable type object falling with gravity to a natural hanging position?
2. If it can, can I also then save the resulting new shape/model and export it to showcase for rendering (or render within Inventor)?
3. I am currently creating the cords using the sweep command. Using this seems like it may cause problems for the simulation. If I use the wiring harness design part of inventor to create the power cables can it then simulate the cables naturally falling and resting due to the forces of gravity? I know the wiring harness design area is built in, but I have never even opened it before..
I wonder how to convert the centre of gravity of a part into a work point.
View 4 Replies View RelatedI'm having some fits with the constrained orbit center. It seems to me that It used to always be in the center of the screen when I would use Shift and CMB. Now it seems to be stuck on the center of my assembly/part. I know that I can hit F4 and long select LMB to re-center but I have never had to do that before the last day or two. I have uninstalled all the Beta Add ins I had installed and I have even uninstalled and reinstalled Inventor Pro 2014.
Is there an option somewhere that puts the default Orbit Center to the center of the screen?
My boss has designed a gravity project that has 21" PVC. Civil 3D 2010 only has 20" PVC, not 21". He basically said 21" PVC exists (JM Eagle) so make it happen. So how exactly can I add a new size to the Parts Catalog under PVC?
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
I have a typical storm sewer pipe network in a drawing by itself with an alignment. I data referenced both of these into another drawing. I draw the pipe network in the profile view I created and the pipes that run with the road show up fine. Every once in awhile there is a lateral storm sewer pipe that runs across the road. When I draw these in the profile view they show up, but, only the pipes that are skewed to the alignment show up. If the pipe is perfectly perpendicular to the alignment it does not show up. I have two styles setup. One main one that shows the inner and outer pipe walls and another one for overrides for the crossing pipes and that stlye has crossing pipe walls turned on.
Why is it though only the skewed pipes show up as ellipses in my profile view but the perpendicular pipes do not?
I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content. I have tried reinstalling the content center and all of the options are selected but still no BSI?
View 2 Replies View RelatedI can log into data managment services outside of inventor.
I can't log into content center or access frame generator from inventor.
INV 2009
I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.
How can i do for use these components? and other question, how can i create account at vault?
How can I put a 'center' into a shaft end in inventor? I have been doing this using the point/hole command and altering the csink details until I get something close to what I want but obviously not ideal.
Inventor 2014 PDS
How to keep the “center mark” at the center of the circle or arc?
I wanted to keep the “center mark” at the center of the circle but sounds not to work!
Is there a way? Or do we need to draw it using the “point” command?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
At my company we currently have a huge number of Autocad deployments for 2010,2011,2012. Right now our deployments weren't setup to include the content centers. I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files. I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.
View 6 Replies View Related