I'm trying to create a handler for the OnDocumentChange Application event.
private Inventor.Application m_inventorApplication;
Inventor.ApplicationEvents appEvents = null;
public StandardAddInServer()
[Code]...
My OnSaveDocument handler works just fine but the OnDocumentChange will not fire. I've been using the even watcher and have been using other handlers but cannot seem to get this one to work.
note that the command "create simplified part" is not firing onpopulatefilemetadata event.
I would expect it to.
I'am trying to get a parallax type scroll to work.
I have my browser small enough so scroll bars are displayed. I have set the stage's overflow to "scroll". In the Stage "scroll" action I have the following: console.log("scrolled");
But it never fires when I scroll.
I've added a similar "click" action to a rectangle on the stage and that works.
I have a button which has a mousover/mousout animation. When i click the button, it will shrink down to 0%. when it does, my mousout event is triggert, which i dont want.
how can i disable the mousout event after the click event?
Is there any chance to define an event trigger which runs an iLogic rule when we check out an already open file? Problem is, that we need to synchronize iProperties on check out to clear "Approved by" when Vault State of Part is "under revision"
Vault Parameter "State" is mapped with iProperty "State".
So I want to run the following on check out:
Call ThisApplication.CommandManager.ControlDefinitions.Item("VaultPropertyWriteBack").Execute2(True)
I have addin running inside Inventor. The requirement is that addin should be able to capture the "save as" operation done by the user. Internally, addin stores unique information in the active Inventor file and when user does "Save as", it needs to generate and store the new unique information in the newly created file after Save As. That is the reason it is required to capture the Save As event.
It was possible to capture the "Save" event and there I get Event Timing Enum (kBefore and kAfter). But the file name is same for kBefore and kAfter. So its not possible to identify that its Save As operation.
Trying to catch an export PDF event.
Few things I have tried...
UserInputEvents.OnActivateCommand
ApplicationEvents.OnSaveDocument
FileUIEvents.OnFileSaveAsDialog
Can't find any reference to export events.
Inventor 2014
How to set a tool tip to show up next to and follow the mouse during user interaction. It's the same function that the CommandManager.Pick does?
If it's not a built in function then I guess it's created by a tool tip that gets moved around to follow the mouse on mouse move?
Is there a way to set the event trigger of an ilogic file that's already inside of a document? I have code that can automatically create and populate new rules across my assembly parts, but it would be nice to set certain rules to fire every time that part gets saved.
If it can't be accomplished outright from the API, would it be possible to throw an OnEvent (save event in this case) inside of the iLogic code, to get the same results? URL...
Is it possible to place an external iLogic rule under a specific Event Trigger in a file via the API?
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
I am setting up template .ipts and .idw for my company, and i run Adept to save and store my files. Now i have a code to automatically make a .idw after i save an .ipt. but then after every save (adept saves the .ipt a lot of times) it will ask to make a drawing for the .ipt. well i was wondering if there is a code to put in a rule to disable the event triggers, and place that rule on the trigger after close document. so that the next time i open the document no event triggers will work.
View 1 Replies View RelatedI have a have a custom ribbon tab on the Assembly and ZeroDoc ribbons, those have pannels and buttons.
The custom buttons have OnExecute event that can have custom actions addded.
But how can we intercept the event when user is clicking on the custom tab to show custom pannels?
Is there a OnExecute or a similar event for the RiboonTab?
So the other day I set up an external rule and created an event trigger to run the rule on save. It worked great ... for a couple days, and then it just stopped working yesterday. I can still run the rule manually and it works fine, but it doesn't seem to run automatically anymore on file save. Yes, iLogic is set to Loaded / Automati in the add-ins panel.
(on the iLogic rule attachment, remove .TXT from the end. I had to add that due to the board's rules about file types.)
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
How to get the API to add an iLogic Event Trigger but I cannot find the exact code on how to do it.
Is there a Simple way to add an Ilogic Rule (External or Internal) to an event trigger with a VBA Macro or iLogic Rule?
I would like to automate adding an iLogic rule to an Event Trigger when we update our old drawings.
The details of the Rule I am trying to call is as follows:
Rule Name = Save On Close Commands
Event = Before Close
We currently have Inventor 2013 and 2014. If it is not possible in 2013, is it possible in 2014?
get the Rule Added to the Event Trigger
Using Ilogic 2010 I wish to trigger my rule on sheet change. Is this something that can be done? I am using it to zoom the drawing on sheet change.
View 1 Replies View RelatedHow to use an embedded cursor (mycursor.cur) via the SetCursor command under user interaction events. I can use built in cursors just not able to get it working with my resource.
Sample below throws an error type mismatch.
oInteraction.SetCursor(CursorTypeEnum.kCursorTypeCustom, My.Resources.mycursor)
I have set the build action of the cursor to be embedded.
Im trying to catch the event when the user selects a component in a drawing view using
CommandManager.UserInputEvents.OnContextMenu += UserInputEvents_OnContextMenu;
But it seems that the onselect event only catches selection of drawing views or balloon, annotation etc, but not the component inside the drawing view is this intentional or a bug?
The reason i need to catch this is to make a new context menu action, so i need the selected item. I know i can use SelectionSet, but i want to be able to debug my application as an external application connecting to the running instance before i build it into an addin (saves me a lot of inventor restarts..) And Selection Set does not seem to work when i use it inside an event handler in an external application...
Private Sub ObjectModified(ByVal sender AsObject, ByVal e As Autodesk.AutoCAD.DatabaseServices.ObjectEventArgs)
With e.DBObject
If .IsWriteEnabled Then Exit Sub
If .Id.ObjectClass.Name = "AcDbAttribute"Then
?????
End If
End With
End Sub
Trying to read the attribute's tag and text.
In my plug-in I have some datagridview to show alignment data of all alignments in drawing.
I have a button called (regen) to update data in these datagridviews. I read again database drawing and re-source again datagridview. (method "upload_all")
I have read some posts and blogs about this: [URL] ....
and about overrule: [URL] ....
But I don´t understand almost.
I only want to execute method "upload_all" if some alignment is modified in the drawing.
Also, I would like to do it if some alignment is just created or deleted.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
Is there any Event or ApI to get the Point3D when the mouse is moving using .net
I want to get Point3D when the mouse is moving just as CAD shown on lower left corner. Is there any way to get it with .net?
I want to catch drawing modify event, that means if user start to edit current document I want to give a message to user.
View 3 Replies View Relatedwhy does the DocumentCreated-Event fired two times. Thats a problem because the code within the event-method must only execute one time.
View 2 Replies View RelatedThere is an event at the show of multiselect ribbontab on Civil3D?
View 4 Replies View RelatedI have a group of classes that essentially implement the Model View Controller pattern. The view is a custom control contained in a PaletteSet. The Model is a class that wraps the ObjectID of a given block. I've used these classes to create a replacement for the Properties tool in AutoCAD (2011). Basically the UI can be used to edit the properties of a Dynamic Block. But I apply my own rules and behaviors to the UI.
I had no problems until I added support for the View to be updated when the block is modified (say by dragging to increase a length property). To do this I handle the Modified event of the block. After the block is modified, some rules are evaluated. If the rules result in changes to the block's properties, these changes are applied. This last part is where I'm having trouble.
When the "Rule Evaluation" code is invoked because of changes to the view (WinForms Controls), I am able to update the block's Properties using the following code without issue:
Public Shared Function SetParameter(ByVal BlockID As ObjectId, ByVal ParameterName As String, ByVal Value As Double) As Boolean
Using dl As DocumentLock = Application.DocumentManager.MdiActiveDocument.LockDocument(DocumentLockMode.ProtectedAutoWrite, Nothing, Nothing, True)
Using myTrans As Transaction = BlockID.Database.TransactionManager.StartTransaction
Dim myBRef As BlockReference = BlockID.GetObject(OpenMode.ForWrite)
For Each myDynamProp As DynamicBlockReferenceProperty In myBRef.DynamicBlockReferencePropertyCollection
If myDynamProp.PropertyName.Equals(ParameterName, StringComparison.OrdinalIgnoreCase) Then
myDynamProp.Value = Value
myTrans.Commit()
Return True
End If
Next
Return False
End Using
End Using
End Function
However, when this same code is invoked as a result of the BlockReference Modified event, AutoCAD completely crashes the momment the transaction.Commit() method is called. I've attempted to catch the exception causing the crash and role back the transaction, but AutoCAD simply exits and displays the error (Error handler re-entered. Exiting now.) and no exception is caught. Note that I do not use the BlockReference instance passed to the Modified event handler. Instead I store an ObjectID instance elsewhere which is consistently used to read/write the block.
Is there something I must do before commiting a transaction when using the Modified event of BlockReference? I checked, and the same "Main Thread" is executing whether the code is invoked from a UI event or the Modified event. I tried calling the Close method, which is attributed as Obsolete, on the BlockReference object before executing the transaction without any success.
I would like to automatically wire up the event handlers for my .net assembly when it is loaded. For instance, does AutoCAD look for and call a "Loaded" or "Initialized" event when it loads my DLL?
View 1 Replies View RelatedI am trying to get a list of selected entities and their layers, but I want to capture it from the editor, not a command.
I currently have
Private Sub ed_SelectionAdded(ByVal sender As Object, ByVal e As Autodesk.AutoCAD.EditorInput.SelectionAddedEventArgs) Handles ed.SelectionAdded Try For Each objid As ObjectId In e.AddedObjects.GetObjectIds Using tr As Transaction = ed.Document.TransactionManager.StartTransaction Dim ent As Entity = tr.GetObject(objid, OpenMode.ForRead) ed.WriteMessage(vbLf & objid.ObjectClass.DxfName & " is on " & ent.Layer) End Using Next Catch ex As Autodesk.AutoCAD.Runtime.Exception End Try End Sub
but when select a circle on Layer 1, I get the result below in the command line
CIRCLE is on Layer1
CIRCLE is on Layer1
CIRCLE is on Layer1
CIRCLE is on Layer1
CIRCLE is on Layer1
CIRCLE is on Layer1
Command:
CIRCLE is on Layer1
If I hover over the circle while it is selected, it also treats it as a selection.
In order to avoid duplicate event handlers, I did like the following...
Document doc = Application.DocumentManager.MdiActiveDocument;try { doc.BeginDocumentClose -= new DocumentBeginCloseEventHandler(MyEventHandler); }catch { // Do nothing }doc.BeginDocumentClose += new DocumentBeginCloseEventHandler(MyEventHandler);
The above worked greatly with AutoCAD 2007. But yesterday I migrated my code into AutoCAD 2010 (with Object ARX 2010).
Unfortunately, it seems like AutoCAD 2010 catches before my code catches it. I guess I could just have a global boolean value that checks the status of event attachment.
i am trying to make a custom palette to display some custom information pulled out from selected objects.i can deal with the palette part.
i want some code for when you click an object in model space then the property palette updates. i am gonna keep it simple so this custom palette only refresh to the last selected object. but i don't know how to make an event when mouse click the autocad object and then do my things. any codes in c# or vb.net would be nice.
so use commandmethod load in a command and there will be a palette there stay open, when user click on an object then it will get populated. what event do i use for the clicking?
I'm trying to react to the AutoCAD application window being resized, that reaction is to move a form so that it stays in the bottom right hand corner of the AutoCAD application window. However, I cant seem to find a way to react to an AutoCAD application window resize event.
View 1 Replies View RelatedDisplaying a vb.net form when an autocad block reference is double-clicked. Unfortunately, I still don`t know how to capture the double-click event for a block reference from code. I have gone down the IMessageFilter path, still no success.
I have tried the addHandler for application using code supplied to me in my previous post, still no luck. I really need to be able to capture the double click event for a block reference in autocad, without overwriting the default autocad double-click behavior.
I wish to be able to double-click a block reference, capture its name, and, if the name is same as blocks created by my form, then I`d simply have my dot net form pop up, displaying a few of the block`s properties.
Below is the code module I am using, which isn`t working ofr me:
' System
Imports Microsoft.Win32
Imports System.Reflection
' AutoCAD
Imports Autodesk.AutoCAD.ApplicationServices
Imports Autodesk.AutoCAD.Runtime
Imports acApp = Autodesk.AutoCAD.ApplicationServices.Application
Imports Autodesk.AutoCAD.DatabaseServices
Imports Autodesk.AutoCAD.EditorInput
[code].......
And the Commands class, from which my vb.net form is generated, as well as where the ModDoubleClick.eventDoubleClick() method is called:
Public Class Commands
' Component for displaying the Mass Straight Conveyor form
<CommandMethod("mst")> _
Public Shared Sub massStraight()
Try
' Call this to override default block dblclk event handler
[code].......
How can I log in a file the start and close event of Autocad?
View 1 Replies View Related
