how to model a leather covering for some furniture I am designing. Do I treat the leather sheet like sheet metal and use the sheet metal tools (I have not used this feature yet)? That way I can flatten it out to get a pattern.
Or do I treat it like a plastic moulding (again I have not used this feature)? A plastic moulding would give me a visual model but I would not be able to get a pattern from it.
Is there a way to create 3d objects in Inventor without having to 'sketch' in 2d first? Such as draw a vertical 3Dcylinder simply by defining its radius and height, without extruding?
View 4 Replies View RelatedHow can I create bicycle gears that have different numbers of teeth but all have an inter tooth distance (distance between the teeth centres) of 12.7mm?
My attempt at a solution and problems encountered:
I made a bicycle gear by patterning a small circle around a large circle then trimming lines (see attached sketch), but this method requires me to estimate the diameter of the large circle before patterning and then keep modifying this slightly until I get an intertooth distance as close as possible to 12.7mm. So I can't get exactly 12.7mm. In my sketch I have labelled this intertooth distance I refer to by construction lines.
I have to create a hollow model of an aircraft. Most of it is reasonably straight forward, however, I am having real problems modelling the nose and cockpit area due to the inconsistency of the shape from the cabin towards the nose of the aircraft.
View 5 Replies View RelatedWe are a transport engineering firm in Queensland and I would like to develop a spreadsheet that can formulate cross member distances and recalculate to add or remove cross members.
The basis of this is the overall size of the body we are building.
For example: The maximum width of a body in Australia is 2.5metres overall. Our cross members would be 6 mm shorter than the overall width of the body to allow for 3mm end caps to cover the open ends of the cross members. So the length of the cross member is width minus 6, or , parametrically the length is (overall width - (endcap thickness x2))
The body length is the tricky one. We have a maximum spacing on the cross members. This will vary from size of body to size of body. EG the spacing on the small 2 tonne body will be different to the spacing on the 12 tonne body etc. So lets say we want to have maximum spacing of 450mm and a minimu spacing of 300mm between centrelines of the cross members. The overall length of the body will also determine the number of cross members required.
On top of this there is the front and rear coaming to take into consideration.
So the formula would be ((overall length - front coaming - rear coaming) divided by cross member spacing)) then a check to see if the last space is what and then can we change the cross member size to take up that space without going over the maximum space. We would also need to take into account the width of the cross member section as well in this calculation.
EG if we have 150mm left at the end we could increase the cross member centres slightly to take up this additional space without going over the maximum space allowable.
I want to create a 3D model for a metal frame I bought commerically. To create the model in Inventor, I need to know the bend angle such as the one shown in the first figure of:
[URL]
What kind of tool do I need to measure the bend angle of the real metal frame reasonably accurately?
In Inventor, is there an easy eay to create the teeth of the servo horns?
[URL]
I design cushions for airplane seats and am trying to display a leather cover on the cushions with pull lines for piping detailing. etc. I am also wondering if a leather material style is availble for DL online.
View 3 Replies View Relatednew to 3D modelling in Autocad. the client has asked me to detail this in about 20 places on a structure.Its an SHS edge beam joining a CHS rafter.Both are at different angles.The CHS has a cleat plate, as does the edge beam.The 2 need to align and connect. The bolt hole must be 40mm off the face of the rafter.The rafter CL & edge beam CL need to coincide at a setting out point.
Where the rafter cleat plate connects to its rafter it has to be in alignment with the rafters plane.SHS edge beam will need to have its sides vertical and horizontal, so the edge beam cleat won’t be aligned with the SHS faces .
Even though I have the autocad file as an example, have tried to draw this about 100 times but cant get it right – I have been unable to contact the draftsman who did it. How to draw it and what commands to use?how to use UCS and other modelling operations.
I'm modelling columns in-place. I have given the first one a Type Mark name but when i copy it the Type Name does not copy with it and the count in my schedule remains at 1.
Due to the shape of the member i had to model it as an in-place family.
how to make a realistic black leather-texture?
View 4 Replies View RelatedWhat are some ways that people like to create cow leather, like the type you might find on cowboy boots? I've been searching for a good way to make a leather-looking tent.
View 2 Replies View RelatedAny ideas on how I can create this effect?
View 1 Replies View Relatedhow to make a leather pattern?
i need to make a sofa and i need leather
what are the best programs for 3d modelling, such as making game characters, 3d cars etc?
View 6 Replies View RelatedI am trying to put an image on a coffee mug so that it does not look like a flat image pasted onto the coffee mug.
View 1 Replies View RelatedI'm looking to make a CD cover with Photoshop and thought this texture was really cool.
View 2 Replies View RelatedI want to design a template for my band's myspace, however the problem is with most artists, what I have envisioned hasn't exactly been going as planned when I try to achieve it in photoshop. What I had imagined is a template that had mist, fog, leather and moonbeams,
The first effect I am looking to do looks like this:
I had wanted to have leather as the background, as in not too detailed but shiny like this picture. However I have no idea where to start to make leather that looks this quality.
The second effect here is a mist, ghost like fog:
I pretty much am looking to do this effect scattered for the template, yet I have tried and have no where to start or accomplish this.
The last effect would be moonbeams:
All I really want is to have moonbeams that are similiar to this, no idea really what to do :/
Anyways I realize I am asking for a lot here, but I am in no ways advanced with Photoshop,
an PSPX3 or X4 import/export .vns and .obj files for 3D modelling ?
View 5 Replies View RelatedI'm wondering how in the attached image they were able to make the white leather background show through the red type? Is it just playing with the opacity? The type feels too opaque for that to be the only thing done.
View 2 Replies View RelatedI would love to be able to produce gold leaf text on a brown leather background. I watched the Photoshop tutorial about it but the menus and results were too different to follow along. Are there any tutorials about doing this with Gimp 2.8.6?
I've seen some excellent tutorials about creating chrome text with effects but I can't find any for gold.
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
I can't get Inventor 2013 show a custom iproperty correct.My iLogic rule is this:
iProperties.Value("Custom", "myvol")=volume = iProperties.Volume
But the custom iProperty is a Yes or No.Had no problem with this in Inventor 2011.
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedCan't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies View RelatedUpgrading to a new computer.
1. What is the best CPU to use for Inventor between the i7 and the a Dual Xeon System
2. Would 32GB of memory easily cover all modelling such as assemblies?
3. Any advantage of having 2 x SSD instaed of 1 x SSD
4. Looking at the Nvidia GTX690 graphics card....this should be a good card
Is there a program that can make stp files from our inventor models? Our purchasing department wants to do this task for our vendors and they don't want in have a full version of Inventor to do it.
View 6 Replies View RelatedSo I installed TD Inventor Professional 30-Day free trial and I downloaded the installer and went through the download of the installer process and it made an autodesk inventor folder on my desktop. I click on it and it takes me into the C drive under the autodesk file Inventor 2012 TestDrive and has an Application called TDSetup. Once I click on it it does a load wheel then nothing happens.
I can't seem to find a solution and I just installed DirectX.
Inventor on a touch screen style PC, and if so... does it work? This hardware looks like it would be fun to work with, but I don't know if it's quite there yet for CAD work.
View 7 Replies View RelatedHow to set off the trim inventor does when one dimensions cross another one?
View 4 Replies View Relatedwe modeled prototypes of trains (locomotives) in 3dsMax, these models will be used to produce molds and thumbnails of these, you must give the producer STP files, max does not export these files, and we have exported in various formats supported by some programs if exported STP, eg Inventor, we have exported files are STL, oBJ and DWG, so far so good, all save the parts or layers without problem.
The problem comes when exporting from Inventor to STP, nothing happens, the STP file is as if you were empty, there is nothing ..
I have attached the DWG file, if possible, have 17 CAD models for export to STP.