I have a problem in accessing the library features while doing cable and harness assembly. Whenever I click on the library option the error pops up by saying that " it has been edited by another user or marked as read only". I am not able to import a cable or wire with some modifications.
View 1 RepliesHow to do it?
I am using Inv/Vault Pro 2011.
I've some user-defined iProperties in my idw-file. As soon as I set the file to "read-only" (via explorer RMB->properties) these iProperties are not shown on the drawing sheet when i open the drawing. ow to abandon this effect?
View 3 Replies View RelatedI've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
Any way to modify a user form parameter's read only status using a rule?
I have a parameter that I want people to be able to edit when another parameter is set to true and to be locked if it's set to false. The only thing that comes to mind is have a rule that will just switch the value back automatically if the user changes it but it would be good if i could control the read only status.
I have a question regarding to modify category in a user library. I have to publish a part into a special category in Inventor 2012. These category asks for an Parameter which doesn't exist in my part. Actually is an absolutely useless Parameter so i want to delete it from category. The category was created by an user but i don't know how to delete the parameter. Only if i create a new Category i can change the category-properties just till its created.
View 6 Replies View RelatedI've got a Library setup called "Vendor CAD" and it's referenced in all my project templates and most existing project IPJ's. I'm thinking of re-organizing my server and actually creating a CAD drive and moving all these files to an area protected from the non-CAD users.
Anyway, once I move the files, is there a way that I can batch change the existing IPJ's to refer to the new path? There's about 70 or so files, so it's not monumental, but I'd really like to not do it manually if possible.
Also - please note, I'm a single user, so I'm not using vault at all.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
Is there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
We have recently had some network issues (complete system crash, network rebuilt from backup), which have been resolved over the last couple days. Now, when we access our existing projects through Project Navigator we get an alert message 'Sheet set is being edited by another user' when we try to add sheets or rename/renumber views on the sheets. It does work occasionally if you try repeatedly, but doesn't seem follow any pattern.
View 3 Replies View RelatedWhen opening one custom Content Center iPart from Inventor I get an Styles Conflict error for some Lights, Materials and Sheet Metal rules.
The Library is created in Inventor 2010 and migrated to 2012. All templates an Design Data are migrated as well. How are these styles are updated in a certain Part?
See the image
If a drawing is opened by another user, I want to retrieve the name of that user. I presume that is in the dwl locking file. I I can't find any info on this topic. How do I read/extract the user name from a dwl file with .NET/c#?
View 2 Replies View RelatedI've installed Inventor 2012 with local (desktop) content libraries.Everything installs OK except the ANSI content library which throws an install error and stops the install.
I had to uncheck the ANSI library prior to install to get everything else to install.Occurs on both of my machines (Win7 32-bit & 64-bit).I think the ANSI install file is corrupted.
How/where can I get the "installed" ANSI content library file that gets installed into C:ProgramDataInventorContent ?
We have like 4 on site and 3 offsite engineers using the same files. They know that if they are opening a file for messurements and the like they should just open read only so someone else can go in and revise. WIth one user she opens the file as read-only and its still not allowing others to open it normaly. Anyone else can open read-only and a second person can go in open it regular. We have a mix of LT 12 and 13 and i think 1 full version of 12. But we tested with drawings between just two of the LT 2012 computers, and the result is the same.
View 1 Replies View RelatedI randomly get a Microsoft Visual C++ Runtime Library error when working in Inventor. It points to Inventor.exe and says "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information." I have a Quadro video card, Win XP, plenty of RAM, no other programs running in the background.
View 5 Replies View Relatedwhat this error message means and how to fix it?
View 2 Replies View Relatedinfo on the following error message when saving to the style library.
View 5 Replies View RelatedWe've been having some issues that have only recently cropped up. If I am in a drawing named FP-00.dwg and I am working, saving regularly, etc. everything is fine. If a co-worker opens up the same file, he will sometimes (10%) NOT receive the read-only pop up and he will open the same drawing with full rights. Then, if I go and try to save, I will be alerted that the file is in use, and my file will be switched to read-only. When I have to do a saveas, the file then changes the default name to: FP-00.fdwg (notice the "F" in front of .dwg).
I posted this to the AutoCAD Architecture group, b/c we are currently using Architecture 2k8.
No one has changed out Open/Save options, and we haven't been losing the connection with our server.
I'm attching a PS of the Open/Save setting.
I have one user (user 1) who will work on a drawing and while they have it open, another user (user 2) opens the same file and they are prompted it is in use and they can open a read-only copy. Once user 2 opens the read-only copy, user 1 can no longer save their drawing until user 1 closes the read-only copy.
User 1 gets the following error when trying to save:
"Unable to save to drawing X:folderpathfilename.dwg as it is being accessed by another session. Drawing saved to X:folderpathfilename.tmp"
This does not happen everytime either.
I am looking for an Example of accessing 2011 AutoCad FX Table.
I would like to programmatically read and write dimensional and user parameters.
Error 2 Cannot register type library "C:UsersaaronAppDataRoamingAutodeskApplicationPluginsSheetMetalSheetMetal.tlb". Error accessing the OLE registry. (Exception from HRESULT: 0x8002801C (TYPE_E_REGISTRYACCESS)) SheetMetal
i see this error when I use VB express. I use window 7 and inventor 2014 64 bit now.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Visual Studio Express 2010
Edited pictures from walmart cd burned them to. Cd DVd..Took them to walmart to print pics walmart photo doesn't read CDs DVDs
View 1 Replies View Relatedwe have problem opening read only files with Autocad 2012, 2013 from Sharepoint library. When user opening dwg file directly from Sharepoint library (with Share point webdav, from Explorer for example) to which he have only read only access, Autocad gives error
„Drawing file is not valid“. The same result for UNC path (\intranetprojekceRizeniProjektu64ArchivProjektu102575) or mapped drive.
When he use Autocad open dialog to find the file in Share point library and use „Open Read Only“ from dropdown, file is opened fine.
Also if user have write access rights to library (when I add him rights for writing for this library), autocad works fine.
We need opening files directly in Sharepoint library (not to download them to users computer) cause DWG files have attached another DWG files from library as XREFs.
May be the problem could be caused by DWL files, which cannot be created in read only library, whilst autocad didn’t recognized the library is read only. But we didn’t find how to disable DWL files in autovcad 2012 or higher.
After getting Vault installed on our server and successfully setting up users and connections, I used the Library Transfer Guide to move our Content Center (including custom) to the Vault. I then changed the Inventor Application Options -> Content Center -> Access Options to Autodesk Vault Server.
This seems to have worked, as I can Place from Content Center when in an assembly, and it is pulling standard content as well as our custom files properly from the vault. However, in the instructions that I used for the installlation, it was suggested to stick with a standard folder structure within the Vault, namely two Library Folders named 'Content Center Files' and 'Libraries' and also a regular folder named 'Designs'.
I created those folders prior to transferring the library, as I thought they would be populated with the standard/custom content. This was not the case and I am curious when these folders come into play? *they are empty*
Also, today I will be attempting to 'Check In' a project to the Vault that I recently completed; does this usually maintain structural relationships between files?
Would you recommend using a single project structure in vault for two people? It seems, since we won't be working on the same project at the same time, having a single project would not be relavant to our situation..
Inventor 2011 / Windows 7 Pro SP1 64bit
Dell Precision T3600
Intel Xeon E5-1607 @ 3.00GHz
AMD FirePro V4900
20 GB Ram
I exported LR3 edited files as web files with a watermark on them. However, I can't seem to find the edited un-watermarked images in the Library, ony the original unedited RAW files and the watermarked web files. I need the edited files prior to my exporting them as watermarked web files.
View 10 Replies View RelatedI tried chaning the settings in the Preferences Panel
View 6 Replies View RelatedI was wondering if it was possible to set a setting in Lightroom such that when looking through my images in the Library module, I only see the final edited image. For example, if I send the image to Photoshop to do any retouches, it creates a copy of the file. When I save the file in Photoshop, I then have two images in the Library module. However, I would like to keep all the history, but when browsing through my images I would only like to see the final image.
View 1 Replies View RelatedI have done but I am using lightroom 1.4. Previously, any pictures I edited would show as an edited file in the library now all that happens is the original image shows as the edited image.
View 2 Replies View RelatedHow do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
I just bought my first Apple gear. iMac and iPads for family. I downloaded some photos to the iMac via iPhoto and tried to allow other users to share the library. This caused major headaches. Prompts to repair permissions constantly appeared, even after permissions were changed. After a visit to the Apple store for a One to One session, it seems that the OS cannot provide this simple functionality (in windows I simply changed folder permissions and it all worked, access granted).
In OSX 10.9 I have to create a disk image, move the library there and add tweaks to auto mount the disk image volume on startup;I just bought my first Apple gear. iMac and iPads for family. Downloaded some photos to the iMac via iPhoto and tried to allow other users to share the library. This caused major headaches. Prompts to repair permissions constantly appeared, even after permissions were changed. After a visit to the Apple store for a One to One session, it seems that the OS cannot provide this simple functionality; URL....
I have a NAS for backups, so buying another external HD I don't need is a waste of money. Surely there must be a simpler way for all users of our iMac to have access to the photo library. I thought it would be a simple folder permission issue.
Would using Lightroom instead of iPhoto to download and organize my photos and videos solve the problem or is the problem due to the way OS 10.9 works? Would Lightroom provide the same quick sharing functionality with links to Facebook and local email apps etc?
I have a project with one library read only - incompatible, It started after an error with archiving, I think that the library was locked by archive process and now I can't even select the library, when I select appears the message: CLIP MGT: error when opening archive: SF: Operation could not be complete. And smoke changes to another library.
Smoke Mac 2012
I upgraded to Illustrator CC and now I can't access my user defined swatch library. It's there, but not highlighted. How to access these, or import from CS6?
View 1 Replies View Related