AutoCAD Inventor :: Import DWG Into Sketch - Layers Unavailable
Jan 27, 2012
A couple of days ago when I went to shut down my computer ran windows updates automatically and the next morning these updates failed and the previous setting were re-configured. Windows updates ran again the next night and updated sucessfully.
Since then I have been having problems importing autocad into a sketch. In the Layers and Objects Import Options dialog box, the layers are not shown and the autocad objects can not be individually selected.
I was wondering if this is the solution to the problem or if there is a hotfix to solve it without having to un/reinstall programs.
When importing Acad files is it possible to imprort without having to fix the sketch in inventor? Meaning, if the Acad drawing was drawn so all the lines attach to another ("closed loop") why is it when I import and select all the layers or (no layers) that i can not extrude the sketch in inventor without always having to fix.
Before importing the autocad file, what needs to be done to the autocad drawing before importing for a flawless sketch so i can just extrude it in inventor?
I have this dwg that i've imported into a part sketch. All except one layer won't come it. So i have made a dwg with only the culprit layer, see attached. Why nothing gets imported into a inventor 2012 sketch.
BTW all layer from my main dwg file gets imported into on single layer even tho i'm not using the option to do that. It is not a big deal compared to that layer not being imported.
try to import it and let me know if it works, my autocad and inventor are patched SP1
I get 'preview unavailable for this file' when attempting to import files from my Panasonic Lumix DMC LX3 - even though the same images show up fine on import preview for Lightroom 3?
I have Lightroom 3 AND 4 on my machine at the minute, running OSX Lion on Mac, and if I have the same card in the same card reader - I see soem unimported file previews with 3, but not with 4! What the hell - older version seems to work better than the new one!!
for some reason I get the message 'preview unavailable for this file' for about 50% of the photos in the import module of LR4.1. This only seems to be an issue upon import since the files still import as usual and I do not encounter any further issues after the import with developing etc. It's not a huge problem for me but still quite anoying as I am not able to review my photos before actually importing them.
Here are some further details:I am shooting with a Nikon D300s, all photos are in NEF-format, I use USB-mini USB connection between computer and camera. The problem occurs on both my Macbook Pro Retina 2012 and my iMac Mid-2010. The problem only occurs with LR4, I didn't have any problems with LR3.
Suddenly, I am getting the above message, when trying to import RAW files in LR 4.3. I tried with two different cards and two different Readers.
When I click on Import, I get a blank thumbnail of all the photos with the message in it. I was able to see the photos in Finder on the Compact Flash card with no problem.
I have LR and camera up to date for a while, so nothing different has been done that I know of.
I am an amateur photographer. I just purchased a brand new NIKON D3300 took a few pictures, signed up for the Adobe annual Photographers Creative Cloud annual program and my first task to have Lightroom import a few test photos fails and I have no clue why my raw + jpgs can't be imported. at the outset In Lightroom I also got a "Preview unavailable for this file" message for every image file when I pointed to the memory card I had connected to my computer:
The files are not recognized by the raw format support in Lightroom. (35) DSC_0376.NEF DSC_0377.NEF DSC_0378.NEF DSC_0379.NEF DSC_0380.NEF DSC_0381.NEF DSC_0382.NEF DSC_0383.NEF DSC_0384.NEF DSC_0385.NEF DSC_0386.NEF DSC_0387.NEF
I've also attached a screen shot. I would really like to use Lightroom and all the Adobe products but I have no clue why it won't work with my NIKON test pictures.
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
I'm using iLogic to build a configurator and everything is working perfectly if I have all the componets available.
However, is there a way to use iLogic in this example:
Assume I have a bolt, nut and washer in an assembly based on 1/2" sizes. I then change the sizes to 1", the bolt and nut update to 1" but I do not have a washer modeled for 1". Is there a way to use iLogic to report that the washer is not available without causing an error or only updating the bolt and nut and ignoring the washer.
I'm trying to set up an easy way to import layers from a certain dwt. file with a shortcut.
Now I found this code, which kind of works, but doesn't do the whole trick. It works with a Popup where I have to insert the dwt. file. It's also annoying that it opens this file than and I have to close it manually.
I would like to have this without any import options and automatically takes this one file always for the layers.
I need to print an initial 2d sketch (without any 3d work done on it).
Printing this in sketch mode seems to output a screen capture, i.e. some lines appear wriggly and not as precise as an ordinary plot of an idw or dwg file.
A sketch w/o any 3d work will not be accepted as an idw file, thus I am not able to use all the formatting (tblocks, fonts, dimstyles, etc.) options available to idw files.
Is there a way of printing a 2d sketch (w/o any 3d work) as an idw file?
I've managed to hack together some code to draw a rectangle and dimension it. Now I want to constrain it to the origin. I figure either using two dimensions from a top/side to the origin and setting the dimension as half of the other respective dimension would work. Or constraining the center point of a top/side line to be vertical/horizontal to the origin.
The problem I'm having is I do not know how to reference the origin. So until I figure out how to reference the origin point I can't use either method.
Public Sub DrawSketchLine() ' Check to make sure a sketch is open. If Not TypeOf ThisApplication.ActiveEditObject Is PlanarSketch Then MsgBox "A sketch must be active." Exit Sub End If ' Set a reference to the active sketch. Dim oSketch As PlanarSketch Set oSketch = ThisApplication.ActiveEditObject ' Set a reference to the transient geometry collection. Dim oTransGeom As TransientGeometry Set oTransGeom = ThisApplication.TransientGeometry Dim oUOM As UnitsOfMeasure Set oUOM = [Code].......
Is there a way to update a symbol of one type, without the changes being applied to all symbols of that type in the drawing?
Example: If I have three Flag Note symbol's in my drawing from the same sketch symbol and the text reads 1, is there a way that I can change the text to read 2 in one of them without the other two flag notes updating as well?
IV 2012 Pro-Suite / VP 2011 Windows Vista Enterprise - 64 Bit Precision Workstation T7500 Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs) 12284 Mb Ram Dual Quadro FX 5800
(1) Why can't you use the Sweep command with a 3D sketch? (2) Why can't you draw circles in the 3D sketch environment? What do you do if you need to sweep a cut with a circular profile along a 3D sketch line?
I want to make some points in 3D sketch base on the Coordinate System that I defined (UCS).Is there any solution to make these points in 3D sketch just by inputing their coordinates in my UCS?
Example: the new UCS origin has (x,y,z) coordinates from the origin.and one of the points has the coordinates of (x',y',z') from the UCS.
So from the origin it has the coordinates of (x+x',y+y',z+z').Is it possible to just use (x',y',z') from UCS directly to get my point?