AutoCAD Inventor :: How To Import Without Having To Fix The Sketch
Oct 20, 2009
When importing Acad files is it possible to imprort without having to fix the sketch in inventor? Meaning, if the Acad drawing was drawn so all the lines attach to another ("closed loop") why is it when I import and select all the layers or (no layers) that i can not extrude the sketch in inventor without always having to fix.
-Redundant points
-Missing Coincident contraints
-Overlapping curves
-open loops
-self intersecting loops
Before importing the autocad file, what needs to be done to the autocad drawing before importing for a flawless sketch so i can just extrude it in inventor?
View 9 Replies
ADVERTISEMENT
Oct 5, 2011
I have this dwg that i've imported into a part sketch. All except one layer won't come it. So i have made a dwg with only the culprit layer, see attached. Why nothing gets imported into a inventor 2012 sketch.
BTW all layer from my main dwg file gets imported into on single layer even tho i'm not using the option to do that. It is not a big deal compared to that layer not being imported.
try to import it and let me know if it works, my autocad and inventor are patched SP1
View 1 Replies
View Related
Jan 27, 2012
A couple of days ago when I went to shut down my computer ran windows updates automatically and the next morning these updates failed and the previous setting were re-configured. Windows updates ran again the next night and updated sucessfully.
Since then I have been having problems importing autocad into a sketch. In the Layers and Objects Import Options dialog box, the layers are not shown and the autocad objects can not be individually selected.
I was wondering if this is the solution to the problem or if there is a hotfix to solve it without having to un/reinstall programs.
Inventor Suite 2010 SP4
Windows 7 Pro SP1 64-bit
View 5 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
May 30, 2013
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
View 8 Replies
View Related
Aug 22, 2012
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies
View Related
Mar 4, 2012
what is the difference between a sketch and a planar sketch?
View 2 Replies
View Related
Aug 16, 2012
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies
View Related
Oct 22, 2013
Just installed inventor on a new PC. When I go to sketch a line it appears to be drawn but nothing is being created.
View 4 Replies
View Related
Apr 18, 2013
Is it possible to offset this 3D sketch1, it must still follow the curvature.
View 9 Replies
View Related
Apr 30, 2013
Inventor 2011 will not offset polygon in sketch mode. I get "Method not supported for transient meta" error message.
View 9 Replies
View Related
Sep 12, 2012
is it possible to create 3D sketch from text?
I need it for engraving as a toolpath and for drawings.
Emboss tool is more suitable for styling and visualisation.
Attached sample from Pro-E:
View 3 Replies
View Related
Nov 29, 2003
I need to print an initial 2d sketch (without any 3d work done on it).
Printing this in sketch mode seems to output a screen capture, i.e. some lines appear wriggly and not as precise as an ordinary plot of an idw or dwg file.
A sketch w/o any 3d work will not be accepted as an idw file, thus I am not able to use all the formatting (tblocks, fonts, dimstyles, etc.) options available to idw files.
Is there a way of printing a 2d sketch (w/o any 3d work) as an idw file?
View 9 Replies
View Related
Jun 26, 2012
I've managed to hack together some code to draw a rectangle and dimension it. Now I want to constrain it to the origin. I figure either using two dimensions from a top/side to the origin and setting the dimension as half of the other respective dimension would work. Or constraining the center point of a top/side line to be vertical/horizontal to the origin.
The problem I'm having is I do not know how to reference the origin. So until I figure out how to reference the origin point I can't use either method.
Public Sub DrawSketchLine() ' Check to make sure a sketch is open. If Not TypeOf ThisApplication.ActiveEditObject Is PlanarSketch Then MsgBox "A sketch must be active." Exit Sub End If ' Set a reference to the active sketch. Dim oSketch As PlanarSketch Set oSketch = ThisApplication.ActiveEditObject ' Set a reference to the transient geometry collection. Dim oTransGeom As TransientGeometry Set oTransGeom = ThisApplication.TransientGeometry Dim oUOM As UnitsOfMeasure Set oUOM =
[Code].......
View 2 Replies
View Related
Oct 28, 2013
Is there a way to update a symbol of one type, without the changes being applied to all symbols of that type in the drawing?
Example: If I have three Flag Note symbol's in my drawing from the same sketch symbol and the text reads 1, is there a way that I can change the text to read 2 in one of them without the other two flag notes updating as well?
IV 2012 Pro-Suite / VP 2011
Windows Vista Enterprise - 64 Bit
Precision Workstation T7500
Intel (R) Xeon (R) CPU - E5504 @ 2.00 GHz (8 CPUs)
12284 Mb Ram
Dual Quadro FX 5800
View 6 Replies
View Related
Jun 6, 2012
I keep getting this error adding a sketch to any view in an IDW... What might be causing this error?
View 1 Replies
View Related
May 10, 2007
In Inventor R11, SP2 why :
(1) Why can't you use the Sweep command with a 3D sketch?
(2) Why can't you draw circles in the 3D sketch environment? What do you do if you need to sweep a cut with a circular profile along a 3D sketch line?
View 9 Replies
View Related
Mar 5, 2012
I want to make some points in 3D sketch base on the Coordinate System that I defined (UCS).Is there any solution to make these points in 3D sketch just by inputing their coordinates in my UCS?
Example: the new UCS origin has (x,y,z) coordinates from the origin.and one of the points has the coordinates of (x',y',z') from the UCS.
So from the origin it has the coordinates of (x+x',y+y',z+z').Is it possible to just use (x',y',z') from UCS directly to get my point?
View 1 Replies
View Related
Apr 17, 2013
I'm trying to put some text into a sketch I have. My issue is the text is coming out sideways. I want the text horizontally.
I tried to use the rotate tool but I can't find a center point in the text box.
View 5 Replies
View Related
Jul 26, 2013
I am working on iLogic models and have a sketch feature in a part that is used as a referance for a caulk bead. The sketch is in an IPT and is a stand alone feature. I am trying to have this sketch feature be visible in and IDW file of the product I am developing but cannot seem to find a solution. Is this even possible and if so what am I doing wrong?
I am doing it this way because the caulk bead spans the entire height of the part which can change via different custom parameters, therefore the caulk bead needs to be able to change with the part while not losing its sketch references.
View 4 Replies
View Related
Jul 25, 2013
I'm trying to make a .dxf or .dwg from our company logo to use it in many parts and assemblies. I also would like to be able to resize it. When I export the sketch from the attached model, and use it in a new part, it says there's open loops and other problems. These do not occur in the original part when using sketch doctor.
What's wrong with the sketch? Is there easier ways to emboss the logo on multiple parts?
View 2 Replies
View Related
Jan 9, 2013
I know my subject is somewhat mis-named, because I gather that you cannot really extrude from a 3D sketch, however I am looking for a way to accomplish what extruding a cut from a 3D sketch would accomplish.
The problem is this: I have a simple 2D sketch that I've projected onto a curved surface (imagine a square projected onto the outside of a hollow cylinder). Now that I have a 3D sketch on the surface of the cylinder, I want to use that sketch as a "cookie cutter" through one wall of the cylinder.
If I were to simply extrude the cut from the 2D sketch, the "cookie" is wider at the edges than at the center. I want the cut to be perpendicular to the projected 3D sketch at all points.
I've attached a simple example that illustrates my problem.
View 3 Replies
View Related
Apr 23, 2012
Why do we not have the "=" (equals) constraint option in 3D Sketch mode? It seems like a very basic need for a constraint. Is there a reason why one should NOT want to have an "equal" constraint in a 3D Sketch?
View 3 Replies
View Related
Jun 10, 2013
Why is it when I select the Top (XZ Plane) does the sketch orient itself so TOP is read upside down? Subsequent Sketches on a TOP face yields expected results.
And it is also true that it if I select Right (XY) the sketch orients itself so RIGHT reads top to bottom? and if I rotate the cube orientation so TOP is truly on top, the Constrain Axis' are off by 90º? yet if I subsequently select the RIGHT face for a sketch, it yields expected results (RIGHT reads from left to right).
This cannot be the way it is supposed to be. it although has been this way for may versions.
M6700, Nvidia K3000M, 32GB, 512 SSD
Win 7 Ultimate 64
Inventor 2014
View 6 Replies
View Related
Mar 20, 2012
I sometimes edit parts in assemblies. When I turn sketch visibility on or off it does not stay the way I left it. I should be able to edit a part in part view or assembly and the view setting off or on should be how it was last saved. If I saved an ipt with the vision it should be on in any & all assemblies it lives in but its not. I have noticed the difference in new version 2012 - 2011 was no problem.
View 1 Replies
View Related
Nov 1, 2013
I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies
View Related
Nov 5, 2013
A iLogic rule to suppress a sketch? When I suppress a feature, the sketch is not suppressed which cause an error. Although this kind of error does not hurt anything, but I do not want to see any error in my model.
How to suppress the sketch by a rule?
View 4 Replies
View Related
