I'm wanting to emboss a logo onto a part. Is it possible to project the logo outline? Or is there a better way of getting the logo into inventor? The logo file is a .jpg file.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
How could I project a sketch on a cylinder?
(see image attached)
I have an existing sketch and a new sketch onto which I want to project some lines from the existing sketch.
The panes of both sketches do not run parrallel.
Normally a projection is created by imaginary projection lines from the existing sketch to the new sketch perpendicular to the new sketch.
But now and want to project the existing sketch with imaginary projection lines that are perpendicular to the existing sketch.
Is there a way to hide project geometry from model sketch? I am modeling a sheetmetal part where I need to sketch centermaks, part number etc. for laser cutting. I want to use xy planes for symmetry reasons when sketching, but I don't want them to appear in dxf. This is a problem if I create a dxf directly from the model.
Usually I create dxf files from drawing by adding new sheet where I create flat pattern view from the spesific part (excluding machinigs etc, only thermal cut boundaries visible). In the drawing I am allso able to show model sketches and hide unwanted project geometry. Is it possible to include these sketches to dxf?
is there a method to project the sketch onto the part so that i can then remove 2mm of that shape from the part....?
Inventor 2013 & Inventor 2014 (work)
I wish to delete all project geometry in the active drawingsketch with 1 click
But unsure how to get to these constraints.
Are these geometricConstraints?
What I have now doesnt work:
Select Case ThisDoc.Document.DocumentType
Case 12292:
Case Else: MsgBox("Current Document not a drawing document")
Exit Sub
End Select
[Code] .......
I am unable to select Sketch geometry via a crossing window to project to a new sketch.
While in the new sketch if I select " Project Geometry " I am only able to select one line at a time. quite tedious for some of my larger projects.
I can not honestly say that this feature was available in previous releases but it seems to me it was. Am I missing a variable somewhere?
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
How to become able to fully constrain a sketch with an image in it? Always stalls at 1 dimension required. Try a sketch with only an imported image.
View 2 Replies View RelatedI am attempting to insert an image into a sketch to be used as a decal, but it appears as a blank gray box. I created this image in Photoshop CS5 on my Mac Mountain Lion partition. I am running Inventor 2012 on my Windows 7 64-bit partition.
I appear to only have a problem with that specific image. All other images on my harddrive insert correctly. I have tried multiple file types (.jpg, .png, .gif, etc), but nothing has worked. URL.....It may be necessary to note that the image is white text with a transparent background.
When I insert a image into a sketch what resolution does Inventor use?
View 4 Replies View RelatedBut is there a way to get an image icon in the project list? I have a lot of projects and descriptive names only go so far with me. A little image next to each one would jog the memory. Rather than plod through a bunch looking for the right one.
View 5 Replies View RelatedI have a basic problem but I can't seem to be able to get around it. I added an image to a sketch successfully but it cam with a yellow line around it (see attached) and I can't remove it. In the sketch properties I was able to change it's color to black to make less visible but it's still there.
Any clue as to how I can make it disappear ?
What is the proper syntax for removing a bmp file inserted into a drawing border defintiion? I am using VB.net.
I got all the way into editing the sketch of my border defintion...
I know the name of the sketch image I want to delete it's something like "C:Temp12345678.bmp"
So I wanted to use the name to get the image file and set it to a variable. Then run the .Delete() command on that. But it's not working.
This is what I have, where oCSTicBorderDef is equal to the border defintiion of the active document..
Dim oSketch As DrawingSketch
oCSTicBorderDef.Edit(oSketch)
Dim strImageDirectory AsString
[Code].....
I have one Inventor Pro 2012 SP1 user who is trying to insert a bmp image into a sketch so he can create a decal and the image appears blank and gray. See the attached screen capture. We converted the bmp to a jpg and we get the same result. When I insert the bmp into a sketch on my workstation and it views correctly. I've logged into the same workstation as the user who is having the problem and the image also views correctly. I tried to change the file associaiton from Microsoft Picture View to Paint and I get the same result.
Here are his workstation specs:
Dell Precision T5400 - Xeon Quad Core - 2.93 GHz
Windows XP SP2 - x32
4 GB RAM
Nvidia Quadro FX 570
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedWhen I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedI'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies View RelatedIs it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies View RelatedI do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies View RelatedIs it possible to put an image of the sky in a 3D autocad project? If yes, is it compatible with sun variable?
View 9 Replies View RelatedMy dvb project file was getting bigger and bigger so I decided to split it into individual files. However, I want to have one file that contains all my library images and I had hoped to reference this library from all the other projects.
So, I have a MASTER.dvb project which contains a library of images, one of which is called LOGO.
In TITLEBLOCK.dvb I want to refer to that LOGO image and place it in my userform.
When everything was together I used LogoTB.Picture = Library.LOGO.Picture.
How do I modify this? I tried LogoTB.Picture = MASTER!Library.LOGO.Picture and variations thereof but can't get it to work.
Just installed inventor on a new PC. When I go to sketch a line it appears to be drawn but nothing is being created.
View 4 Replies View RelatedIs it possible to offset this 3D sketch1, it must still follow the curvature.
View 9 Replies View Related