In a weldment assembly i place a symmetric, circular part, but later i want to drill holes in it, and i am afraid that i will accidentally rotate it.
Can i place a constarint that prevents it from rotating? there is no such possibility.
I can ground the part, but i don't like it since if there are modifications they might not be applied (i don't have experience in grounded parts)
I want to make an assemby consisting of 3 parts. A crank shaft and a crank pin that screw into threaded holes in a crank disk. How can I insert them and prevent them rotating in their holes but still allow the whole assembly to rotate around the axis of the shaft? Also how could I lock a flywheel on to the shaft so that whole assembly can rotate togeather?
View 1 Replies View RelatedTrying to use overlay to prevent some circular xrefs. When the civil plan is xreffed as an overlay, the images and pdf's xreffed in the civil file show up in the file it is xreffed into. As an overlay, this should not happen? the problem is that that both the civil and piping drawing has the same pdf xreffed and it is doubled up. Does overlay not work for images and pdf's? is there something else?
View 2 Replies View RelatedCan I export a solid from a multi body part to an other part file. how?
View 1 Replies View RelatedHow can I convert a surface body in a solid body?
I attach my file.
I'm working on a UDK level for a college assignment.
I want to create a circular shaped elevator with a circular fence around it that's roughly half the size of an average sized character standing on it. I then wish it import this as a static mesh into UDK.
Here are 2 sketched up designs of the elevator, what I want to create.
1st image: [URL]....
2nd image: [URL]....
I am very new to 3DS Max so I would prefer a list of steps to follow to create this elevator with a a fence,
Is there away to use an IFeature creating a new body?
I mean, modeling a part as multibody, i would like to insert a feature with an iFeature, but i would like too that that new feature will be a new body.
I have tried in many ways.. including inserting in the ifeature a Split Feature..but with no sucess.
Is possible create new Body (SolidBody) for iFeature? In VBA or .NET.
View 5 Replies View RelatedI would like to create 3D model of a boat attached. How to create front part of the boat.
View 7 Replies View Relatedi used to use Solidwork's sweep-cut with a solid body feature but i can't find it in Inventor now.
Procedure:
In part file;
Create a second solid body (must be axis-symetric, like revolved feature),
Create a path that intersects with the solid (can be a line or a curve),
Sweep the solid along the path with cut command.
I need this where the sweep-cut with a profile is not enough, to get surfaces obtainable by milling on a cylindirical body on a helical path.
This sheet metal part has two bends, and was created with a lofted flange feature on the XY plane:
It was then cut by two circular profiles on the XZ plane:
When the flat pattern is created, it seems to work just fine as long as the diameter of the circular cut is below a certain value. Once the diameter is increased beyond this value, the flat pattern returns a cryptic error and does not compute:
I know that the bend geometry does NOT pass through the bend axis, so I am left guessing at what the real problem is. I have attached the part. The part currently has the parameter called "Tank_ID" set to 500 in. To see the error, change the value of this parameter to 600 in. For me, the flat pattern breaks between the values of 512 and 513 in.
Why does the flat pattern work at 512, but not at 513, since there is no significant difference in geometry?
I am currently trying to model a multi cavity mould tool. The cavities themselves do not follow either a circular or rectangular pattern.I have modelled one of the cavities using a revolve internal to the tool. I have also sketched out on the upper surface centre points where I need the cavities to be.
I was hoping I would be able to copy the cavity feature, select a base point and then use the centres from my second sketch to place the cavities.
I don't seem to be able to find this option. The copy and paste feature will likely work but it is hugely long winded positioning each cavity individually. Any method I might be able to use to model such a part?
I have modelled a disc, which has 6 cylindrical extrusions in a circular pattern on the disc surface. I want to change the number of occurrences (the "placement") to 9 but the "OK" button is disabled. I get the preview od the 9 occurrences, but it will not complete the command.
View 3 Replies View RelatedI have an insert that I'd like to split into several layers. Is it possible to do this with the split tool, or is it limited to only one "split tool" at a time?
In the picture, the wireframe is the 'insert', the letters indicative of cavities cut into the insert. The purple sketch lines would be typical of where the solid part would be split into multiple parts.
INVENTOR 2014 STANDARD
IOSX and PARALLELS
I'm trying to emboss a sketch to a lofted body. The same sketch is embossed perfectly on a flat/round/extruded/chambered body, but on this particular lofted body I get an error ("Thicken operation would result in a large topology change. Try with a smaller thickness"). I already tried with 0.01mm thickness and still not work. What could be the cause. (I'm using IV 2013)
View 4 Replies View RelatedIs there a way to get the mirrored hole to go all the way through both parts of the mirrored solid bodies.
I do realize that I can create the hole in a seperate feature, after the mirror. It will only let you select one 'solid' during the mirror command. Here is a simple .ipt to demonstrate the issue.
what this error means and what's causing it and how to fix it?
IV2010, editing a multi body part gives these errors:
1. No more memory available. Attempt to allocate 208 bytes of memory failed.
and
2. See attached.
This error is preventing me from saving or closing the program.
I'm making drawings of assemblies in Inventor 2012 and was wondering how to turn off the visibility of specific solid bodies within a single part containing multiple bodies, or make it match the visibility in the assembly and part file itself.
In particular my situation is that I have a camera whose part model includes a solid body for its view cone. The visibility of this solid is turned off, so when opening the camera itself, or the assembly containing it, it doesn't appear, but when I place that assembly or part in a drawing it's included, and the only way I've figured out to get rid of it is to turn the whole camera's visibility off within the drawing.
Whenever I place a view of a derived part (or an assembly containing derived parts) the body of that from which the part was derived is also displayed, even though when viewing the part or assembly file they are invisible. It is almost as if there is a "ghost" reference to the parent body of the derivation - surely there must be a way to turn this off?
View 3 Replies View RelatedI want to make an ipart of a container with as customizable parameters (the Diameter and the Volume of one of the solid bodies).
[URL]...
Here comes the problem:
when i was changing the volume parameter, i recieved an error that this property was read-only.is it possible te use the volume calculation from inventor the calculate back to the diameter or height? ,and also for a solid body?
If so, what do i need to do? I am using inventor 2013 (basic).
Any way of forcing an update of the colour styles from the original Multi-Body part to the assembled/derived components.
I always control colours in the original Multi-body part as I can select groups in one go to change colours, this doesn’t filter down to the derived/assembly component I then have to go into each part and uncheck then recheck the 'Use color override from source component'.
I am aware of the reg file/vba to remove the source override completely but which works for certain ways of working / problems, but I want to control it from the original part which I assume was the way it was intended as it is the default option!
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
I am working on a multi body IPT and i would like to use some purchased valves and air cylinders in the design.Is it possible to put them into the IPT. I have downloaded the cad files and converted them to IPTs.
View 4 Replies View Relatedhow to set a custom parameter to be equal with a body volume, assuming I have a multibody part.
I have found how to assign total volume of the part to a parameter using iLogic rule.:
Total_Volume = iProperties.Volume
and that's it.
You can do it also for a component in an assembly , but can't see how to do it for a body...
AIP 2014
Windows 7 x64
Dell Precision T7400 Intel(R) Xeon(R) CPU X5472 @ 3.00GHz (4 CPU's), 8Gb RAM, NVIDIA Quadro FX 5600 1536MB GDDR3
I have a track that uses gravity to pull a ball along it. I have gravity entered in my simuation but I cannot get the ball to move. How can I give the ball the ability to move in each direction.
View 6 Replies View RelatedIs it correct that the BOM will not show thumbnails for a multibody assembly until the component are dirtied? I initially get 'preview not available' for all parts in the assembly. Opening a part and (for example) moving the EOP back and forth will then cause the thumbnail to show in the BOM.
Is there any quick workaround or do I have to write a macro?
Is there a way to get that long tube and that rectangular part all around that middle circle.
[URL]........
Open this picture. In the end it would end up looking something like that lamp shade. I got one part down so is there a way to get a bunch of those around instead of redrawing it?
I am trying to draw a series of flow channel (in a row) in a rectangular parallelepiped.
So I sketched a rectangle -> extruded (cut) -> sketched another rectangle -> extruded -> sketched another rectangle inside of one of channel -> extruded, and finally made a flow channel like in attached file.
What I hope to know are :
(1) Is there a way to copy that flow channel? Or should I have to do same repeatedly for tens of flow channel?
(2) Is there a way to make a flow channel easily?
I am trying to convert this composite surface into a single solid body, however when I try to stich the surfaces in the construction environment it always crashes. I have also tried edditing the STEP file import options but it still always opens as a composite surface.
View 7 Replies View RelatedI have created two solid body in the modeling mode &maintained seperate body ( Didn't combine) there after hide & visibility off one solid body .while taking the detail that time two solid body is appearing. how to switch of the body in detail.
View 9 Replies View RelatedI've created an assembly by using "Make Components" from a part comprised of solid bodies. If I suppress a feature in the "Control Part.ipt" (the part that holds all the solid bodies) it removed the part from the assembly, but it does not remove it from the BOM. What do I have to do to make the BOM follow what the assembly looks like?
View 2 Replies View RelatedWonder if there is a way to split the body at the central region only and not across the whole length. Like to split the solid into 7 solids along the v-grooves.
Using IV2012.