AutoCAD Inventor :: Unable To Split Body Partially?
Dec 29, 2012Wonder if there is a way to split the body at the central region only and not across the whole length. Like to split the solid into 7 solids along the v-grooves.
Using IV2012.
ADVERTISEMENT
AutoCAD Inventor :: Split Body Into Multiple Parts?
Oct 30, 2013I have an insert that I'd like to split into several layers. Is it possible to do this with the split tool, or is it limited to only one "split tool" at a time?
In the picture, the wireframe is the 'insert', the letters indicative of cavities cut into the insert. The purple sketch lines would be typical of where the solid part would be split into multiple parts.
INVENTOR 2014 STANDARD
IOSX and PARALLELS
AutoCAD Inventor :: Create Simple Mold Using Solid Body And Split
May 14, 2013if i draw up a 3d sold part as the finished part, can i then draw a new rectangle solid body over the top of this and split the new solid body using the part as the split tool?
the idea being that i am left with a rectangular plate with a female 3d impression of the finished part in the top.I can't seem to use the part as a split tool?
AutoCAD Inventor :: Split A Single Solid Body Into 2 Solid Bodies?
Sep 19, 2012I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
AutoCAD Inventor :: Unable To Split Solid
Mar 14, 2013I have been working for an hour trying to add this split to this part. I have an extruded surface (ExtrusionSrf10) that I need to use as the parting line. When I try this all I get is a "Create parting line failed.....Errors occurred during update".
I have done this many times on other parts, this one is being a pain. I need the split to have two solids when its done. The reason that I want this is so I can sculpt out a portion of this block.
The file is about 15mb. Here is a link to it.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
AutoCAD Inventor :: Unable To Create Split View Of Section Broken
May 14, 2013I can't create a split view of a section broken in. I've attached the screenshot.Is there a workaround to do it?
View 1 Replies View RelatedAutoCAD Inventor :: How To Export Body From Multi-body Part
Sep 12, 2013Can I export a solid from a multi body part to an other part file. how?
View 1 Replies View RelatedAutoCAD Inventor :: How To Convert Surface Body In Solid Body
Mar 8, 2012How can I convert a surface body in a solid body?
I attach my file.
AutoCAD Inventor :: Slice Any Geometry Partially?
May 21, 2013I want to slice a geometry partially. But not want to divide the geometry into two parts.
I attached a photo of a part. How can i draw this geometry by using Inventor?
AutoCAD Inventor :: Partially Defined Parts In An Assembly?
Aug 6, 2013Basically I am evaluating to model rebars in Inventor. Rebars come in predefined shapes - for example a "L" bar will have two dimensions (marked as A, E and R). The shape definition is fixed by a standard (like BS:8666) and the values for dimensions A, E and R are provided when it is instantiated as a part in an assembly.
I created an assembly as follows:Created a new part containing just a solid cube.Created a part for the above rebar by sweeping a circle along path which resembelled the above bar.Created an assembly and inserted the cube as 1st part.Inserted the L bar part as 2nd partInserted another L bar as 3rd part.modified the 3rd part's diameter and found it updates the other L bar as well.
My questions:Is there any way for me to create the part for L bar without giving any fixed values for the sweep path and sweep profile diameter and use it in assembly?If the above question doesn't has a solution, then is there any way for me to change one instance of the part to change while other instances of it doesnt get affected (the behaviour said in step 6 of above should not happen).
AutoCAD Inventor :: Parts Has Partially Or Completely Grey Properties In Browser
Mar 2, 2012Some parts properties of one project has partially or completely grey in browser.
Nothing special had happened prior to this problem. It happened with some absolutely irregular and not systematic affection as like a fallen and broken ink bottle makes something completely colored and some other stuff just partially and some not.
I mean some parts properties are completely grey and some have just several grey properties while some other are not affected (see video link)
It is a permanent bug and seems it belongs to the part itself since the reloading Inventor and windows and Task Scheduler attempts to fix it - all gray colors stay exactly where they were before and in same irregularity. Opening the affected parts in other project gave the same result as in original one.
[URL]
AutoCAD Inventor :: Use IFeature For Creating New Body
Jan 9, 2014Is there away to use an IFeature creating a new body?
I mean, modeling a part as multibody, i would like to insert a feature with an iFeature, but i would like too that that new feature will be a new body.
I have tried in many ways.. including inserting in the ifeature a Split Feature..but with no sucess.
AutoCAD Inventor :: Solid Body For IFeature
Jun 1, 2013Is possible create new Body (SolidBody) for iFeature? In VBA or .NET.
View 5 Replies View RelatedAutoCAD Inventor :: How To Model Boat Body
Sep 5, 2013I would like to create 3D model of a boat attached. How to create front part of the boat.
View 7 Replies View RelatedAutoCAD Inventor :: Sweep Cut With Solid Body
Feb 28, 2011i used to use Solidwork's sweep-cut with a solid body feature but i can't find it in Inventor now.
Procedure:
In part file;
Create a second solid body (must be axis-symetric, like revolved feature),
Create a path that intersects with the solid (can be a line or a curve),
Sweep the solid along the path with cut command.
I need this where the sweep-cut with a profile is not enough, to get surfaces obtainable by milling on a cylindirical body on a helical path.
AutoCAD Inventor :: Emboss Sketch To Lofted Body
Aug 19, 2013I'm trying to emboss a sketch to a lofted body. The same sketch is embossed perfectly on a flat/round/extruded/chambered body, but on this particular lofted body I get an error ("Thicken operation would result in a large topology change. Try with a smaller thickness"). I already tried with 0.01mm thickness and still not work. What could be the cause. (I'm using IV 2013)
View 4 Replies View RelatedAutoCAD Inventor :: Multi-Body Mirror Holes
Dec 7, 2012Is there a way to get the mirrored hole to go all the way through both parts of the mirrored solid bodies.
I do realize that I can create the hole in a seperate feature, after the mirror. It will only let you select one 'solid' during the mirror command. Here is a simple .ipt to demonstrate the issue.
AutoCAD Inventor :: Error In Multi-body Parts
Apr 26, 2012what this error means and what's causing it and how to fix it?
IV2010, editing a multi body part gives these errors:
1. No more memory available. Attempt to allocate 208 bytes of memory failed.
and
2. See attached.
This error is preventing me from saving or closing the program.
AutoCAD Inventor :: Solid Body Visibility In Drawings?
Sep 6, 2012I'm making drawings of assemblies in Inventor 2012 and was wondering how to turn off the visibility of specific solid bodies within a single part containing multiple bodies, or make it match the visibility in the assembly and part file itself.
In particular my situation is that I have a camera whose part model includes a solid body for its view cone. The visibility of this solid is turned off, so when opening the camera itself, or the assembly containing it, it doesn't appear, but when I place that assembly or part in a drawing it's included, and the only way I've figured out to get rid of it is to turn the whole camera's visibility off within the drawing.
AutoCAD Inventor :: Turn Off Derived Body Root In IDW
Jul 22, 2012Whenever I place a view of a derived part (or an assembly containing derived parts) the body of that from which the part was derived is also displayed, even though when viewing the part or assembly file they are invisible. It is almost as if there is a "ghost" reference to the parent body of the derivation - surely there must be a way to turn this off?
View 3 Replies View RelatedAutoCAD Inventor :: Customizable Volume Of Solid Body
Jul 26, 2013I want to make an ipart of a container with as customizable parameters (the Diameter and the Volume of one of the solid bodies).
[URL]...
Here comes the problem:
when i was changing the volume parameter, i recieved an error that this property was read-only.is it possible te use the volume calculation from inventor the calculate back to the diameter or height? ,and also for a solid body?
If so, what do i need to do? I am using inventor 2013 (basic).
AutoCAD Inventor :: Multi-Body Colour Update All
Dec 10, 2012Any way of forcing an update of the colour styles from the original Multi-Body part to the assembled/derived components.
I always control colours in the original Multi-body part as I can select groups in one go to change colours, this doesn’t filter down to the derived/assembly component I then have to go into each part and uncheck then recheck the 'Use color override from source component'.
I am aware of the reg file/vba to remove the source override completely but which works for certain ways of working / problems, but I want to control it from the original part which I assume was the way it was intended as it is the default option!
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
AutoCAD Inventor :: Multi Body And Importing Parts
Jan 27, 2012I am working on a multi body IPT and i would like to use some purchased valves and air cylinders in the design.Is it possible to put them into the IPT. I have downloaded the cad files and converted them to IPTs.
View 4 Replies View RelatedAutoCAD Inventor :: Body Volume To Be Assigned To Parameter?
Sep 26, 2012how to set a custom parameter to be equal with a body volume, assuming I have a multibody part.
I have found how to assign total volume of the part to a parameter using iLogic rule.:
Total_Volume = iProperties.Volume
and that's it.
You can do it also for a component in an assembly , but can't see how to do it for a body...
AIP 2014
Windows 7 x64
Dell Precision T7400 Intel(R) Xeon(R) CPU X5472 @ 3.00GHz (4 CPU's), 8Gb RAM, NVIDIA Quadro FX 5600 1536MB GDDR3
AutoCAD Inventor :: Free Falling Body Simulation
Feb 2, 2012I have a track that uses gravity to pull a ball along it. I have gravity entered in my simuation but I cannot get the ball to move. How can I give the ball the ability to move in each direction.
View 6 Replies View RelatedAutoCAD Inventor :: How To Prevent A Circular Body From Rotating
Sep 30, 2013In a weldment assembly i place a symmetric, circular part, but later i want to drill holes in it, and i am afraid that i will accidentally rotate it.
Can i place a constarint that prevents it from rotating? there is no such possibility.
I can ground the part, but i don't like it since if there are modifications they might not be applied (i don't have experience in grounded parts)
AutoCAD Inventor :: Thumbnail Not Available In Multi Body Assembly BOM
Jun 11, 2013Is it correct that the BOM will not show thumbnails for a multibody assembly until the component are dirtied? I initially get 'preview not available' for all parts in the assembly. Opening a part and (for example) moving the EOP back and forth will then cause the thumbnail to show in the BOM.
Is there any quick workaround or do I have to write a macro?
AutoCAD Inventor :: How To Make Same Solid Bodies Around Another Body
May 24, 2013Is there a way to get that long tube and that rectangular part all around that middle circle.
[URL]........
Open this picture. In the end it would end up looking something like that lamp shade. I got one part down so is there a way to get a bunch of those around instead of redrawing it?
AutoCAD Inventor :: How To Duplicate A Part Inside Of Body
Sep 12, 2013I am trying to draw a series of flow channel (in a row) in a rectangular parallelepiped.
So I sketched a rectangle -> extruded (cut) -> sketched another rectangle -> extruded -> sketched another rectangle inside of one of channel -> extruded, and finally made a flow channel like in attached file.
What I hope to know are :
(1) Is there a way to copy that flow channel? Or should I have to do same repeatedly for tens of flow channel?
(2) Is there a way to make a flow channel easily?
AutoCAD Inventor :: Converting Surface Into Solid Body
Sep 28, 2012I am trying to convert this composite surface into a single solid body, however when I try to stich the surfaces in the construction environment it always crashes. I have also tried edditing the STEP file import options but it still always opens as a composite surface.
View 7 Replies View RelatedAutoCAD Inventor :: How To Hide Solid Body In Detail
Dec 4, 2012I have created two solid body in the modeling mode &maintained seperate body ( Didn't combine) there after hide & visibility off one solid body .while taking the detail that time two solid body is appearing. how to switch of the body in detail.
View 9 Replies View Related