I used to use the Stress Analysis feature at my assembly.
Now I have copied it to another project and do not need this FEA info at copy.
I cannot just delete AIP folder since Inventor claims of missing FEA files while opening.
How to erase those files info from this assembly file?
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am deep into my first Inventor project. I am approaching the point where I would like to make a comprehensive set of drawings with bills of material etc. I have discovered that all this time I have actually been working in one big assembly file. My main project file is NOT a project file (so I have discovered). It is a *.iam file.
So, my question is, should I create a project file, and then add my main assembly to it? Should one normally create a new Project file for each new job? What does one gain by doing this versus simply using the *.iam file?
Inventor 2013
Wblock when run from the command line used to erase the entities selected, now it seems it does not, but the dialog box shows an option to keep or erase the selected entities.
Any variable name that controls this functionality?
Basically, my school has the 2012 version of Inventor while I have 2013, and I was wondering if I can still use STEP files in an assembly, and also in my drawing sheets.
View 9 Replies View RelatedI have several projects that have some very big complex assembly files which are taking up a lot of space on our company drive. I need to compress and archive these large files to free up space on the drive. I know that shrinkwrap is an option to simplify assembly files, any optimum way of compressing large assembly files and reducing the file size considerably ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have an assembly that has a component that has not only been deleted from this assembly, but has been removed from the vault. When I try to select a similar file on my local, just to get through this I get the followong error message and this cycle keeps going in circles. Wanting me to point to where this deleted file is.
This assembly remains unresolved and as a result of that I cannot check it into the vault.
Another frustrating things about his is in the dialog window that wants you to select a different file, there is no option to either select from the CC or the vault. Why?
I just hope the only solution is not to recreate this assembly. Because this is a subassembly used in upper level assemblies. Speaking of which those upper lever assemblies wont check into the vault either because of this issue.
Inventor Suite 2012
Windows 7
(Colossians 3:23-25)
How to rename the files of an assembly without effecting to assembly, as we do it in solidworks explorer.
View 9 Replies View RelatedMy attempt to plot all related files form an ".iam" resulted with the following code. The code as is working for us. We use an eight digit number for file name. Plotted PDF will have revision added to file name. Any chance of making an addin or iLogic code for similar functionality?
Private PDFPATH As String'FOLLOWING CODE USES CODE FROM URL...AND OTHER PLACES INCLUDING INVENTOR HELP.Public Sub PrintRefFiles() 'BOMQuery() ' Set a reference to the assembly document. ' This assumes an assembly document is active. Dim oDoc As AssemblyDocument Set oDoc = ThisApplication.ActiveDocument Dim ASSYIDW As String ASSYIDW = oDoc.FullFileName ASSYIDW = Replace(ASSYIDW, Right(ASSYIDW, 4), ".idw") If Dir(ASSYIDW) <> "" Then 'Debug.Print strDisplayDim oDrawDoc As drawingDocument Set oDrawDoc.
[code]....
Is there any way to add sketch blocks to an assembly sketch?
View 9 Replies View RelatedWe do not use VAULT. We're using network shared folder with 3 machine.
In some cases three users opening same assembly and sub assemblies. In this case Inventor showing us an error like "You can not save file. Use save-as" But in this case it's impossible to work share files.
We're opening / using same project file (ipj). I remember that older versions of Inventor give us to chance that not save some subassemblies of main assembly. In this case you may save newer version of assembly files..
How can I share network folder to share my assembly files with the other colleagues?
Using Inventor 2013 and not Vault. Because we're using Linux file server .
I'm running into a file conversion issue at work. I use Inventor 2008 and i need to have my assembly miodels analyzed by stress engineering via Pro/E Wildfire.
I've tried converting the assembly file to .iges and .step. However, the assemblies are jumbled in the conversion. All the parts are there, but the constraints are not. In the past, the assemblies have been small enough that the stress engineer was able to reassemble the parts in Pro/E. This current project, however, is much to large to do so.
If I were to purchase Inventor 2013, could I save the files with the Pro/E native file extensions directly?
We have an issue regarding Parts Lists. We currently produce a 'master parts list drawing' for the jobs we produce. This drawing has 2 rolled up parts list on it -
1 - purchased parts - so buying can order all the required parts in one go.
2 - manufactured parts - so production know which and how many parts to make.
Both of these can be setup in Inventor (using filters) so they display only the correct parts from the BOM. However, neither of these show assembly / subassembly files (and consequently drawings). Is there any way of creating a parts list that can show assembly files only?
I've got some IGES files, which I want to place into an assembly, and then create a drawing of the assembly.
If I open the IGES and place it in a drawing it works. If I create an assembly, place the same part, and then try and put the assembly into the drawing it doesn't work.
Attached is the IGES file. I'm using Inventor 2011.
How can I make an assembly file independent from the part files that went into it? I tried converting it to STL then opening the STL document, but that causes problems with what I'm trying to accomplish.
View 4 Replies View RelatedI am trying to check-in an assembly, however there are missing .fins,.fsat,.ftes, fmsh and .fres files that cannot be found on my local machine, in the vault or on the other machines on our CAD network.
is there a way to remove references to these files so the assembly can be checked into the vault?
I use IDW file as “fine” checker of my assemblies design. Sometimes it is much easier to see general picture in variety of spots and set dimensions to check the designed assembly using IDW file.
Working within mid to big assemblies Inventor mostly fails to follow the opened assembly IDW file with actual assembly. When switch from assembly to IDW Inventor may indicate the update sign at IDW but finally did not update all changes. After the “Update” sign has been used there is no any chance to force Inventor to make one more update. I mean there is no any manual update tool or way to force one more update. The only one way is to close the IDW and open it again. It quite time consuming process.
The second problem opened IDW file is automatically updates somewhere in background and in most cases makes troubles of changing parameters in assembly or subassemblies since it somehow can catch up changes first when it opened but not active. User cannot prolong working without either updating IDW or closing it. Either way it takes too much time.
some ways to manually force IDW update and to postpone IDW files from automatically update in background?
I don't understand why my parts aren't updating when I put a hole through them on the assembly drawing? I would expect the part (.ipt file) to get updated with a hole through it when I save the assembly drawing, however it doesn't. Do I have to change a default setting or does inventor no do this?
View 1 Replies View Relatedproblem when manually animating a model ratchet and pawl mechanism in an assembly file. One can get the pawl to track the ratchet wheel surface OK but there seems to be nothing to stop the ratchet wheel going in both directions, contrary to real life experience. I have used transitional constraints to link pawl surfaces with ratchet wheel surfaces but there seems to be no drive constraint which will operate in this circumstance.
View 5 Replies View RelatedI would like to know, whether is there is any ilogic option by which the Custom content center is triggered automatically to insert component in an assembly.
View 7 Replies View RelatedI am having trouble getting the erase tool to erase part of an elipse shape in Corel Draw. I select the erase tool and click and drag across the part of an elipse that I want to get rid of (so far so good), then I release the mouse and an outline of the nib tool is left behind.
View 5 Replies View RelatedI am using Inventor 2009 SP2, OS is XP Professional 2002 SP3.
I copy a file which has lot of parameters, I want to delete some of them, but Inventor Parameters pop up window just has buttom to add a user Parameter, without button to erase one.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedCan I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro