AutoCAD Inventor :: Feature Control Frames And Dimensions?
Jul 12, 2012
How do you add feature control frames, datums etc to hole notes and dimensions with leaders? Seems to work fine with linear dimensions by dropping them in, but for the life of me I can't make it work with anything that uses a leader. Either the arrow on the contgrol frame shows up, which I don't want, or it places the control frame right on top of the dimension.
View 6 Replies
ADVERTISEMENT
Sep 10, 2008
I can add Feature Control Frames in a Drawing Curve but i can't do it in General dimension. How I can add Feature Control .
Frames in General Dimension.
View 6 Replies
View Related
Nov 8, 2012
Using AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
View 4 Replies
View Related
Mar 16, 2012
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
View 8 Replies
View Related
Oct 25, 2012
Is there a way to change the position of the ‘note text’ to over the top of the Feature control frame as currently the ‘note text’ goes underneath and company standards will be adhered to at all cost !
AIP2011 sp2
View 2 Replies
View Related
Nov 4, 2013
I'm looking to do sort of an adaptive annotation thorugh vb.net.
Essentially i'd like it start with a leader and instead of your normal text dial that appears, you get a box to punch in values in a grid. 5 columns across, as many as two rows.
The idea being if i punch in 1, 2, 3, 4, 5, 6 in the first six boxes all 5 in the first row appear with boxes around each number and then only the 6 has aa box around it on row 2.
I can see it as a table 5x2, and the format option being if the cell has text, the border type is outline. Although i don't think those options exist for inventor.
View 1 Replies
View Related
Aug 13, 2012
I am trying to retrieve dimensions from an assembly. The features that I want were created in the assembly itself, not on the original parts in the assembly. I can manually dimension some of the features, but there are others that I need to retrieve. When I retrieve dimensions from the assembly, I am only given the original dimensions for the parts.
View 7 Replies
View Related
Jul 19, 2013
I am having trouble with dimensions disappearing in the drawing when I update my model.
I add the correct dimensions then when I update my model, all dimensions on the drawing disappear and I have to make them all again.
A little more info:
I am using the tube and pipe feature to drawing tubing inside of an assembly.
Process:
1) I draw the tubing routes and populate them (to show an actual swept tube)
2)Right click on the newly created route in the explorer and open the tube.
3)File->new->drw.
4)Add necessary dimensions to the tube drawing.
5)Save and close drawing
Up until this point everything is fine.
6)Edit the tube route in the assembly and save
7)Upon opening the drawing of that tube route ALL dimensions have disappeared.
View 9 Replies
View Related
May 21, 2012
In 2010 and previous releases I recall being able to show the feature dimension by right clicking "Show Dimensions" and then being able to double click on any visible dimension and change its value. I don't see this behavior in 2012. Is there a setting to turn this on?
View 7 Replies
View Related
Nov 28, 2012
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies
View Related
Jul 23, 2013
I am trying to dimension a drawing and I get some strange results
Bad Dimensions.jpg
How do I control:
1. the size of the arrowheads;
2. the size of the text;
3. how the dimensioning lines contact the object being dimensioned;
4. etc.
View 4 Replies
View Related
Jul 20, 2013
Having drawn this spacer for the tutorial I am following, I decided to add the dimensions. The dimension shown here is 200mm but you wouldn't know that.
Dimensions 20-07-2013 10-25-32 AM.jpg
How do I set the dimensions so I can see the arrowheads and read the text?
View 2 Replies
View Related
Jun 28, 2012
How to set up a dynamic block so I can control the size of an object through parametric dimensions that are linked (somehow) to a lookup table, spreadsheet, list, etc.?
What I'm trying to do (simplified) is place a block of a rectangle, select a size from a dropdown list, and have the block change to be that size - but I don't want to do this through visibility states as there are hundreds of sizes. The whole point is to be able to construct a list, lookup table, excel sheet, etc and link it to parametric dimensions in the block, or at least be able to link a stretch action to parametric dimensions. But the block editor will not allow me to associate a stretch action with a parametric dimension (at least I haven't figured out how to do this.)
View 1 Replies
View Related
Aug 22, 2012
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
View 9 Replies
View Related
May 31, 2013
i am using inventor2012 and have a problem with frames;when i create a frame with Insert Frame, it places the frame as a part (Frame0001/ ISO 657-1 - L40x40x4-400) in browser, it is ok.
and then i use Patternt tool, it creates a part (Component Pattern/ Element:1/ Frame0001/ ISO L40x40x4 00000001:1) in browser. it is ok.but when i used Insert Frame to crate new frame, the second frame part places in Component Pattern/ Element:1/ Frame0001/ ISO 80x40x6 00000002:1
and same pattern setting is applied on new frame part too, but i do not want apply pattern (or not same pattern) on new frame. and all frames (patterned frames too) hold together by Component Pattern part. how can i place new frame separated with first frame.
View 4 Replies
View Related
May 28, 2012
The frame i have modeled has a cut out section. How would you cover up / blank off the cut out section in the frame?
Inventor 2013
View 3 Replies
View Related
May 2, 2013
If a want one assembly with, lets say, 2 steelframe cases made with frame generator, and I want to have a piece of wood between them and I want to edit the position of the cases and the thickness of the wood. Then I need to do the frame generating in 2 separate assemblies and bring them together in a mother assembly?
View 2 Replies
View Related
Jun 16, 2011
I have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
View 4 Replies
View Related
May 27, 2012
in Inventor 2010 we can save and load iLogic Paremeter with *.xml and just in my opinion we can control parameter using *xml or html. It's right or false?
how to control Inventor parameter with *.xml?
View 2 Replies
View Related
Apr 4, 2013
I'm trying to enter a model parameter value with a VBA form, but I don't know which type of control to use neither how to write the code. I want to enter a number or a value with any control and use this value for modify a model parameter.
I have a simple code with a line:
oModelParams.Item("z").Value = 25
I want to make something like:
assuming that "TextBox1.Value" is a numeric value obtained with a control at the form
oModelParams.Item("z").Value = "TextBox1.Value"
View 1 Replies
View Related
Jul 3, 2013
Is it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
View 7 Replies
View Related
Jul 24, 2012
I am running Autodesk Map3D 2012 and I need to label my feature points no matter if they overlap or not.The Map3D documention refers to a check box that will allow what I believe I need- but I cannot find the checkbox in the style editor. Here's a clip from the Autocad documentation:
To allow labels to obscure points on the selected layer..In the Display Manager , select the point layer. Click the Style button.In the Style Editor, click Allow Other Labels To Obscure Feature Symbols On This Layer.
View 1 Replies
View Related
Jan 23, 2013
I have made a design on autodesk inventor along with gear and motors which give input to the mechanism. (Stewart Platform)
I am able to test the design by giving a random rotary input to a motor component which features availabe on Inventor.
However, I want to control that input somehow. I just want to enter the final coordinates the design needs to reach and the motors should be actuated automatically so as to reach those coordinates.
I have a MATLAB code for the purpose but am unable to understand how to connect it to Autodesk Inventor.
View 1 Replies
View Related
Jan 31, 2012
As my Inventor endeavors continue, I would like to take a template of a part I made and use Excel to change the parts dimensions. Essentially make it so if we need a 20 Tonne Lift Lug, I just punch in the necessary values in Excel and have the part update.
View 1 Replies
View Related
Sep 16, 2013
Is it possible to control (move) End of Part with iLogic? Let's say to move it before or after a certain feature.
View 1 Replies
View Related
Jun 7, 2012
I use the 'select other' command on many occasions and find it a bit irritating that when I get the drop down mini-toolbar to choose from a list of axis, faces etc. that is gradually fades off - is there a way to turn off the fade so it remains on screen throughout the selection process ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 1 Replies
View Related
Oct 20, 2011
How can i run a rule in an assembly to control a parameter that occurs in different parts ie to turn a feature on or off on mutiple parts
View 4 Replies
View Related
Nov 14, 2013
From iLogic i got a lot of information. And i want to configure or display this in a form.
But without having to make parameters for everything.
Example:
Display the stocknumber of an ipart/iassembly.
Configure the parameters from a part in the main assembly.
View 7 Replies
View Related
Jul 26, 2013
I am using ilogic rules found in this forum to publish to pdf.
I would like to know if its possible to hide certain layers while publising to pdf.
So is it possible to do that with ilogic?
View 1 Replies
View Related
Jan 31, 2008
Is there a way to create a custom control (text box) that I can add to a toolbar? Everything I've seen simply has a button on a toolbar.
This is my idea:
1. Click on a sketch dimension/property.
2. Dimension/property name shows up in said textbox.
3. Editing the textbox will update the name of the dimension/property.
View 2 Replies
View Related
Feb 13, 2013
I have a part made where various parameters in it.
Now I place the part in a assy and from there i want the parameters to control the part.
I do this now by the same parameters from the part to add in the assy by typing the parameters manually in the assy.
Is there a way that you can define parameters retrieved from the part about the assy without retyping and therefore can make mistakes?
View 5 Replies
View Related