I have a very simple Inventor 2013 CAD model that I tried to export to an STL and the scale of the STL is not 1:1. I have tried changing all of the units and setting 100 different ways and I still cannot get it to export to a 1:1 scale for 3D printing. What is the deal with this I cannot believe it is this difficult.
View 9 RepliesI have a multiple storey building that has been created in Revit 2012. The client would like a separate Revit model that only contains the information on one floor (Level 4), so that he can give this separate model to his tenant, to be used to do a renovation.
View 1 Replies View Relatedyou have to primitives, that you've modified. These objects are one on top of the other.When you click on the one that's on top, the screen momentarily goes dark, then all you see is the object on the bottom, not the one you are say, moving.
What you should be seeing, of course is the top element, and bottom element, so, (as in this example) you can see how far you have moved it in relation to the bottom one.
My question is: is this happening because my video card is under performing?
System stats:
Windows 7 Ultimate 65bit
i7 Quad Core at 3.4Ghz (it's the 2600 chip)
8 GIGS of Ram
NVidia GT440 with 3 Gigs onboard ram (DDR3) Links to a comparison chart.
PSU 350 watts.
In attempting to use either 'export face as' or 'export sketch as' from a solid model in Inventor 2013 the resultant DXF file ALWAYS consists of PolyLines. This prevents other "downstream" software from properly importing the file as a DXF. Thus far the ONLY work-around I have found is to open the DXF in AutoCAD, Explode the polylines, and then re-save as a DXF from AutoCAD.
View 8 Replies View RelatedI am trying to model a plastic part which is attached to each other on one side of the edge and it snaps into each other on the other side. I was able to manage the hald section of this part but not sure how to do other half.
how to do these plastic parts?
How can I display a sketch or projected geometry that is not a closed loop in a ipt drawing? Historically I have to use a closed loop and emboss in order to display the geometry in a drawing.
Then move that forward to a DXF file for its intended use. I think there should be a way to just have lines placed on the model and display it on a drawing without it having to be a feature.
I'm trying to split a part model for mold analysis. The complex cut line is along a variety of directions and axis. I'm using autodesk inventor 2014,
View 3 Replies View RelatedIS there a way to use the flat model of a sheet metal part?
I want to save only the flat model from the IPT file and use it to build a die.
I'm using VB 2010 express. My code is getting selected part and changing some "Design Tracking Properties" of it. But when I change the properties focus goes from the selected part/sub?... How can I make part selected again? How can I make it focused.I need like below like
invDocument.SetFocus or invDocuments.MakeItSelected like...
Dim asmDoc As AssemblyDocument
asmDoc = inv_App.ActiveDocument
'********
Dim invDocument As Document = Nothing
Dim compOcc As ComponentOccurrence = Nothing
[code]...
I have made a part - a motor that has four holes.
Now I'm trying to make another part, which will be aluminium plate that needs to have holes in exactly same points as the motor. My assembly containts both that parts.
What I'm trying to do is to reference in sketch a point that comes from different part (motor).
I could do it by hand, make it look that the holes are on top of each other but then there will be an error which doesn't seem professional.
In some tutorial on yt I have only found that using points one can reference the holes more easily, but it didn't show how.
I'm trying to extract the Rev of a model (part or assembly) from a drawing. Since Inventor has independent revs for the model and idw I am trying to drill down and put the rev from the model referenced. I got it to work for ipts and many iams using:
Dim oModelDoc As Document
Set oModelDoc = oDocument.Sheets(1).DrawingViews(1).ReferencedDocumentDescriptor.ReferencedDocument
The problem I have is when the drawing only references an ipn presentation file. The ipn ALSO has it's own independant rev! I'm trying access the model the ipn references but cannot get it to work.
BTW, I do know about the ability to sync idw and ipt properties. I have enable it for our template but we have a lot of legacy drawings that don't have this option selected. I also haven't tested that method with an drawing that only references an ipn.
Code is below with offending section in bold:
' Find model (part or assembly) referenced by drawing if active document is a drawing
If oDocument.DocumentType = kDrawingDocumentObject Then
Dim oModelDoc As Document
Set oModelDoc = oDocument.Sheets(1).DrawingViews(1).ReferencedDocumentDescriptor.ReferencedDocument
[Code]....
Is it possible to search & find where a dimension listed in the parameters dialog occurs in a part model ( in which sketch for example)?
Inventor Suite 2013 Ultimate
I'm trying to create a content center part with a decal attached to the model. The problem I am facing it that the decal is not adjusting in size when the ipt is placed from the content center. The decal does adjust in the original ipt.
View 2 Replies View Relatedim having a problem exporting to model! is there a size limit on the completed file? i cant do the particular file that i want at the moment but i can do any other so far! ive attchedf a txt file of the error, ewasErased
export to model.txt
I want to export a layout as a dwg file. Why do I want to do this? I got a drawing, and they put some stuff on the layout, so I want to export the layout so I can then work in the new file in the model area? Do you get what I mean?
Also, If I make a layout, I put my Firm Logo and information in the layout. If I send this to another firm, which isnt using Autocad, they than can only see the model area, so If I can export it into 1 file, in the model area, they cann see the whole thing.
I'm currently working on a project that requires modelling in revit but exporting the final drawings in Autocad format. As a requirement from my client, I am demanded to export the entire paper space into the model space as Autocad entities.
When I export the drawing, the composition that I model in Revit is shown in the paper space, Is there a way to automatically export this composition into the model space?
Im trying to create projections of the 3D model with the VIEWBASE command, is it possible to assign it to part of the model?
View 9 Replies View RelatedAm trying to convert this pump into solid ?
View 6 Replies View Related3dsmax 2011 64-bit on windows 7 pro
Exporting already triangulated model to .FLT and noticed that exporter re-triangulate mesh somehow. how to disable that?
Is there any additional settings for the flight studio exporter, where I can disable automatic mesh triangulation?
My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
Using acad 10 I just start using annotative styles now, so far in order to detail a part I use to actually copy the geometry, change styles and scale and start detailing.
The problem is that often when Im detailing and annotating a part I need it to be clipped.
Is there any way to tell autocad that in scale 1:25 I don’t want to see all the structure but only a specific area of it(clipped inside a rectangle)
I'm not a Maya user, but our employee that is, is out of the office. I have models I need to export as OBJ models but I'm having issues.
I've enabled the plugin for the objExport.mil by checking Loaded and Auto Load.
I go to Export All and locate where to export the file.
It exports a 1kb file with nothing in it.
Why won't it export the OBJ?
Intel Quad Core Xeon 2.8 ghz 64 bit
8gigs of Ram
I have a human figure, created in Maya, which has been rigged with both bones and muscles.
After it has been posed, is it possible to export the skin of this model without it losing definition from the lack of the maya bones/muscles?
I know that it can be exported to Mudbox, but is this the only place it can be exported?
I am trying to find a way to reproduce a model created in Maya (or Mudbox for that matter) as a physical object (via 3D printing).
Yet no one seems to have much experience with this, and tools like "Inventor" don't seem to like working with things that are not solids (i.e. not polygon meshes, sub-divs, or NURBs).
Has anyone had any luck exporting a Revit 3D model directly to Acrobat 3D? I can't seem to get it to work.I can export to AutoCAD and then to Acrobat 3D, but I lose all embedded Revit information.
View 2 Replies View RelatedI have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View Related I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedThe part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedI`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
New user 2014
Part created in assembly does not update to part file.