I have a driven dimension in the attached part. If I change something in the part that affects the dimension it won't update unless I double click it to get the edit dimension dialog and then confirm it.
Changing the contour flange's length will affect the driven dimension which can be found in sketch5 under cut1.
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedI have a flange that I use iLogic and the parameters list to update the different styles. My problem is that my flange won't update until after I hit save and update. My other square flange is not this way. As soon as I change the parameter in my square flange it immediately updates. Is there anyway I can get my round flange to update immediately like my square flange? I attached pictures below.
View 1 Replies View RelatedI noticed some errors in certain table entries in an i Feature of mine after I had already started creating parts using it. I've updated the table and when I add new instances of the feature to my part they work fine, but the existing instances of it stay the same size. Is there any way to force the existing instances to update?
The i Feature in question is a sketch and I'm using Inventor 2012, if either of those is relevant.
I want to creat a driven dimension that I can use as a reference dimension in another part. Is there an easy way to do this without creating a new sketch, going into a previous sketch, making a long function based on other dimensions, etc.? For instance, just like the measure tool, but it stores the measurement.
View 4 Replies View RelatedI have an assembly I've put together in Inventor 2011. I tried to make an adaptive spring to use with a shock that goes in a car. I'd like the spring to change size as the shock extends and contracts.
I went through the process of creating an adaptive spring, and it worked, but I could only change the length of the spring by using the "Drive Constraint" feature, which only allows me to adjust the spring when I'm using the "Drive Constraint" menu. It plays like a movie. What I want is a part that just moves like you would expect when you push/pull the ends of the shock. I don't want to have to drive it like a movie.
So then I thought that I could just simulate a spring by making a series of rings (toroids). I could constrain the bottom ring and top ring to the shock geometry and then have the other rings position themselves according to the distance between the top and bottom rings.
SO, I have 5 rings. The bottom ring is grounded the top ring has a Limit Constraint that sets the top ring anywhere between 3 and 7 inches above the bottom ring.
How do I create a driven dimension on an assembly that will automatically update the distance between the top and bottom ring?
I would like to call that dimension "HEIGHT", and then I could use parameters to set the middle ring a distance (HEIGHT/2) above the bottom ring, I could set the ring below the middle to (HEIGHT/4), and I could set the ring above the middle to (HEIGHT*3/4).
I should then be able to move the upper ring up and down and the other rings reposition themselves automatically to keep even spacing between the rings on either side.
I tried making a sketch in the assembly and using the "Project Geometry" function to add the location of the upper and lower rings to the sketch. I then used the "Dimension" function to create a driven dimension between the upper and lower rings. When I finished the sketch the other rings all updated exactly as anticipated, but when I moved the top ring the projected outline did NOT move, so the other rings did not continue to update.
lease do NOT link me to adaptive coil video tutorials or explain how driven dimensions work when making parts. I am not looking for that, I am looking for how to create driven dimensions between two placed components in an ASSEMBLY.
In 2012 when in a sketch in an assembly all the stuff under "Format" is grayed out.
You cannot make a dimension driven, nor can you make a line construction or a centerline and you can't change a sketch point into a center point. Do I have some setting wrong?
Is there anyway to add a driven dimension or reference dimension as a column chooser? What I am really trying to accomplish is to show the metric and english dimension in my general table for my ipart. I model itself is dimensioned in metric. I now would like to add the english dimension next to the metric one.
View 6 Replies View RelatedI'm trying to use the new arc length dimension feature in Inventor 2013 and I am having some trouble. After I apply a driven arc length dimension to a fully constrained sketch and then put user dimension in a user parameter I get an error when I rebuild the part. The error states the the dimension can not be solved.
View 9 Replies View RelatedI have multiple of the same drawings. The drawing will stay the same but the device names will be different for each drawing. Is there a way to have a excel lookup table for each device and each drawing can reference to ?
View 1 Replies View RelatedI was curious to see if there's a way to set up Autocad (2010) to recognize when MTEXT objects are edited, and have it adjust their defined width automatically (both single- and multi-line)--versus having to click on the arrow every time to snap the text box "margin" to the actual text. I'd like to do this to keep my background masks the exact width of the text; I just hate it when the mask doesn't cover enough of the text, or when it covers more and the background is unnecessarily obscured. I'm careful about keeping things neat, but my coworkers aren't .
View 1 Replies View RelatedWhen opening a drawing that has corridor model xrefed in, the corridor section is not updating automatically.
If I reload the xref, it updates.
If I manually synchronize the alignment, it updates.
But just opening the drawing, it does not update.
I have even tried using the OTB tutorial drawings. Same problem.
Not having cross sections update automatically?
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
My Lightroom 4 catalogue is now automatically updating my DNGs from Process 2010 to 2012 when I open the folder in Library. The Update Dialog box does not open. I do not want this to happen automatically, but cannot find a preference or setting to control this.
View 2 Replies View RelatedWhen I change a dimension in one viewport the alphabetical text size in another viewport enlarges automatically (not the numerals) yet when I look at the properties it still says the right size. How can I stop this from happening?
View 7 Replies View RelatedIn AutoCAD, or some 3rd party software perhaps.
Is there a way to automatically display the dimension of lines or objects as you draw them? I looked at dimensional constraints, but AutoConstrain doesn't seem to have an option to automatically apply dimensional constraints....right?
Is there an automatic way to force a mesurement, to become Referenced? (driven)?
Even if sketch is not yet totally constrained?
If I have a parameter in a sketch were I want to change side of the reference line in a other word I want to put in a negative value in the parameter to change side. I want to do this because I have used this parameter in other equations and want not delete it and replace again.
View 5 Replies View RelatedIf my memory serves correctly CATIA used to have a feature pattern type that allowed for the selection of two sketches (or something along these lines, my memory is fuzzy). One sketch contained the feature profile, and the other contained points where you wanted the patterned features to plop out at. Is there any similar function in IV?
In case there's another way to accomplish what I'm trying to do, I'm drawing a piece of roll formed sheetmetal with a crap load of slots with non-uniform spacing. I would really prefer to not have to create a sketch and draw all these slots. Especially when there's not even a legitimate slot command. I could probably draw one and then copy it around a bunch of times,
I would like a part, that if i place it into an assembly, that it asks for a parameter (for example the length).Parts in the content center have this featere (for example tubes). I think this has to do with the driven length in the content center.
How do i create a driven length?
How to create Script Rules that make the Title or Part Number in iProperties Value always same with Doc.Filename...?
View 3 Replies View RelatedI have a parent assembly that contains multiple sub assemblies, two of which need to synchronize with each other.In the parent assembly, I have created a user form that controls the sizes and quantities of all the different sub assemblies.
Sub assembly 1 contains a bracket for supporting 4 rows of pipes.Based on the width selected from the main parent assembly, the length of this bracket can vary.
The spacing of the 4 mounting positions is also determined from the length of the bracket.Sub assembly 2 is an assembly containing all the pipes.The pipes are spaced apart to suit the bracket using a component pattern, and it is this distance that I want to control from the parent assembly.This is just one of the basic scripts I've tried.
Pipe_Spacing=Parameter("SubAssembly1:1", "Pipe_Spacing_A")
Parameter("Piping assembly:1", "Pipe_Spacing_B")=Pipe_Spacing
Pipe_Spacing_A is the spacing of the bracket
Pipe_Spacing_B is the component pattern in the piping assembly
Pipe_Spacing is the parameter in the parent assembly to be driven by the bracket parameters.
I have very little iLogic experience & have being learning as I go along with this project.My best guess is that the code can't loop back on itself. On a slightly different note, I have also noticed that the sub assemblies don't update properly.
If I adjust the width to X and regenerate the model, some of the sub assembly updates. To fully update, I have to go back into the user form, change the size to Y & then change it back again to X and then regenerate.
I have loads of dwgs made by a former employee at another site that have our company logo in the tile block. I need to replace the company logo with a new one. If it were not made from a dwt, I could change the .dwg file and just reinsert the block and let it redefine the block, done. But since all of the text in each drawing was input using a template, I cannot do this without losing all of that data. We are not permitted to explode the title block, delete the old logo & add a new one as the drawing format needs to remain as one entity. Is there a way to automatically update these dwgs without re-entering all of the title/revision block text on every drawing?
View 2 Replies View RelatedI want to use I logic to adjust an assembly constraint based on T/F value passed from a master sketch.
I have passed the paramater T/F and/or a user paramater as described in this thread using link (neet trick).. but when the code fires it only works on the true application and not the false.. if i open the rule and then close it the update button becomes available and when updated the false condition updates sucessfully. I have tried just re-running the rule to no avail. It seams that the only way I can get it to triger a false condition is to open the rule... close it and update.
If Parameter("iTrigger0101000") = 1 Thend37_Header1 = -.25 ind34_Header2 = -.25 inElseIf Parameter("iTrigger0101000") = 0 Thend37_Header1 = -.25 ind34_Header2 = 0.0 inEnd If
I am trying to record a video of a driven constraint. It seems to work fine until I go to view the video file. When I open the file the windows media player opens but no video plays. It acts as if the video is a ~ milli second long.
I have tried to save the file in both formats: .wmv and .avi. Both do the same thing.
I am in the process of compiling a parameter driven sprocket. I just download the model from the CBLISS website these items are spreadsheet driven and they conflict with the MRP system interface we are using here.
All my formulas seem to be going nicely until I have to enter the square factor into the formula. [i.e. (d0)^2 or powr ((d0):2)]
It just will not accept syntax function. I have an idea the problem my lay in the unit types in the equation or the previous equations.
The formula I am trying to achieve is
Hr = sqrt(Fr^2-(1.4ul*DR-0.5ul*PITCH)^2)
Refer to JPG for clearer picture as to where I am coming unstuck.
The setup is: I have a rule which first gets a number of user parameters via input boxes.This rule then runs a number of other rules, using:
iLogicVb.RunRule("Rule 1")iLogicVb.RunRule("Rule 2")iLogicVb.RunRule("Rule 3").Each of these rules control parameters, part/feature/constraint suppression etc. in the top level and subassemblies/parts based on the previously obtained user parameters.
All the rules have the 'Don't run automatically' option selected, so all should only run as intended when I manually run the first rule.When I run the first rule, I enter all the parameters, and the subsequent rules run.The problem is, the suppression states etc. in the subassemblies/parts do not update.
Looking at the parameters dialog box after the rules have run, all user parameters have updated with the new values.If I run the first rule again the subassemblies/parts update correctly.
It appears that the rules that control the suppression states etc. of the subassemblies run using the initial values of the user parameters, i.e. the values as they were before the user input is obtained, rather than the new values.This is confusing me, as the code is structured as follows:
user_parameter_1 = InputBox("User Parameter 1", "Input", "xx")user_parameter_2 = InputBox("User Parameter 2", "Input", "xx")iLogicVb.RunRule("Rule 1")iLogicVb.RunRule("Rule 2")
I have 2 parameters in a part (a spring), "diameter" and "Length".
I change these parameters with iLogic to build several springs.
Is it possible to update the "Part Number" Each time I change the parameters "diameter" and "length"?
I want to get the following:
Mola_Ø-65_L-140
Where 65 is the parameter value and 140 is the length value.
I tried with the code below,
iProperties.Value ("Project", "Part Number") = "Spring_Ø-" Diameter "_L-" Length
but that returns: End of statement expected.
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
How can I change the precision of Driven Dimensions. I have a Driven Dimesion in a sketch that I want to use in another dimension later. Let's say that d59 is a Driven Dimension.I want dimension d80 = d59*2. When I measure it using eight decimal places, I can see that it is rounding d59 to 3 decimal places, but I don't want it to do that because then d80 is off.
View 7 Replies View RelatedI’m currently running Inventor 2010. Is there a way I can override the calculated physical mass and drive the mass value with a column in the ipart table?
View 4 Replies View RelatedI have 4 different sub assemblies , each with a common part , I need to line up all these common parts in my main assembly.
View 5 Replies View RelatedI would like to create an equation driven curve with inventor. I have no problems plotting the function in a plotter, however, inventor won't accept my equation. It gives me the error message, saying: "The equation contains unit errors". I'm using the explicit equations.That's the bare equation:
"y=sqr(2)*16.5/2/sqr(pi)*sqr(arccos(1-2*x/50)-(sin(2*arccos(1-2*x/50))/2))"
I modified it, inserting variables which I defined also in inventor, leading to this:
"sqrt(2)*height/2/sqrt(PI)*sqrt(acos(1-2*t/length)-sin(2*acos(1-2*t/length))/2))"
But both equations are not accepted by inventor due to unit errors. In this design, I'm using the metric system, millimeters, so I don't understand why and how I have to redefine this for the equation in order to get it working.