I need to close a gap between one frame member and another, I have tried using the trim / extend function however this does not work. The members are 25x25x3 SHS, please see attached screen shot which shows the issue.
View 9 RepliesIn Inventor 2013 it was easily to switch in a drawing view between different iPart members. Through Edit view => Tab Model State and then it was possible to switch between different iPart members. So it was easy to make a copy in the Vault from only the dwg (from a iPart member) and then change the iPart member. Now in Inventor 2014 it is not possible anymore.
View 1 Replies View RelatedIn Inventor professional 2009 Tube & Pipe style using, We have to give each pipe member name for display in BOM every time.
View 3 Replies View RelatedIn C++ can I use this function, using the key index Member string to select which row in the factory I want to insert?
In the docs all I see is Use an iPartTableRow (but no examples in C++).
Use an index, this works but I need to know the index before using it.Use a set of parameters in a string (but "[Member=142314]" does not seem to work. Can I not simple use a string with the appropriate member?
How do I rename an iPart member name? Can I use Design Assistant?
View 2 Replies View RelatedFrame members that are trimmed to work planes in the skeleton won't update when these planes are moved. This is not how it is supposed to work, right?
View 1 Replies View RelatedIs if possible to create a hole in an assembly created with Frame Generator? (Inventor 11)
View 9 Replies View RelatedI have created a user parameter in a assembly, then creating a member with FG i use that parameter as member offset. The same with other members.
Changing from Parameters that parameter no update happen, I have tried rebuild all, refresh..no working. The only thing that works, is to use the "change" command , select my member(s) , change nothing, than ok.
Then it update.
Is it a software limit? A bug? An error in the workflow?
I am trying to come up with an automatic method to add a new row to my i assembly table and populate that row based on values entered by the user (assuming that combination of values doesn't already exist... ). Basically, I wish to build my i assembly table on demand over long term by user input via a form that calls an ilogic rule.
View 1 Replies View Relatedis there a way to reconnect a frame member to a other sketch line? Lets say i've altered my sketch and delete a line to which a member was referenced. I get the error when rebuild the assembly.
When click change and select the said member i cannot select a new sketch line..
I have a sick FG member but when I try and delete it I get this.
View 5 Replies View RelatedI am looking for broad principles as opposed to blow by blow information. I am planning to use inventor for the design of model aircraft. My problem at present is a lack of understanding of the possible ways in which the following can be achieved.
The sides of the fuselage are sheet material ( balsa or ply or a combination ) which need to be available in a 2D format so they can be converted into DXF files that can then be sent to my laser cutting machine.
I also need to model the fuselage as a solids model in inventor. How does on go about modelling something like this? The curvature is going to be single as opposed to double.
Ideally I woul like a command that enables me to take a 2D sketch ( a copy of which is converted to DXF ) and to bend it around formers to form the fuselage shape. That would be similar to the process that is used in the actual construction but I dont think that there is one as yet.
I have a user that is creating frame work using custom members copied from the standard. We have edited the frame members to use the company's part numbers and description and everything works fine. The Parts List populates with the correct part number / stock number and description just fine. I have customized the Part List style to display the stock number if one is available so that it shows correctly.
The problem comes when changing the size of a frame member out. Frame Generator creates a new file for that member and the Parts List displays the correct Stock number but the description still shows the original size's description not the one associated to the new member's size.
I haven't tried it but I am sure that deleting the Parts List and reinserting might fix the problem but there are other lines in the Parts List that have Static overrides and the user would have to redo all that. Why does the PN/Stock Number update correctly but the Description does not?
Dell Precision T3500
Xeon 2.13GHz - Windows XP sp3
3GB RAM
nVidia Quadro FX 580
Erik J. Kurek
MCADAE, ICE, MICE
Manufacturing SME
Inventor 2013
Dell Precision WorkStation T3500
Bus Clock: 4800 megahertz
2.40 gigahertz Intel Xeon
8192 Megabytes Installed Memory
Windows 7 Professional (x64) Service Pack 1
NVIDIA Quadro FX 3700
I'm with a problem here, that when i try to change a material from a frame member, i got the error below:
[WARNING] Frame Generator: Errors occurred while attempting to change frame member(s).
[WARNING] Problems occurred during changing Frame Member(s)
[ERROR] A change could not be completed. The reason for the failure is unknown. Please retry.
The structure that i'm trying to change, was created in IV 2012 SP1, and now I'm editing it in IV 2013.
All the pieces of this project were converted to the new version, and the only big difference from 2012 in this case i think that is the materials library, that I created a new one and set on project as default.
The strange, is that if I enter frame by frame and go to iProperties>Physicals, there i can change the material normally (but with a big wate of time ofc).
I have created a frame using the frame creator with all the individual members listed in the frature manager. When I check this into the vault it goes in fine.
When I create a second frame (seperate frame file) it uses one or two of the same fram types as the first frame. The problem comes when I go to check this into the vault it says the member already exists.
I have been told and I am seeing it that the frame creator always starts with "001" and numbers downward in creating the member names. This creates a problem in the vault because of the duplicate file factor.
What I ended up doing was calling up that particular member and doing a file save as then replacing it in the assembly. Then it would check in fine.
Is this the only work around or is there a setting somewhere that allows unique names for these frame members.
I'm having trouble with iParts. This specific part is for a component that has many dimensions that vary from size to size, for a total of 23 configurations, 9 inch, and 14 metric. I did not have this problem until today... when trying to work with the iAssembly that uses two iParts (by means of selecting which Part Factory Member is used in each Assembly Factory Member).
I know that if the files are read-only, the files will fail to generate. I have checked this, was still having trouble, and so I deleted the files. The problem persists.
All the members compute successfully and there are no empty cells when editing the table. The filenames are just letters/numbers and dashes, no spaces.
The assemblies and parts had been generated and checked into vault, but only now problems exist, only for the newer parts, which happen to be the metric parts.
I have created a few new structural parts that I am in the process of publishing to the content center.
I got one of them in and have it working very well except for one item. If I place this structural piece into an assembly as a stand alone part just selecting the length and the material as the key inputs, it shows the proper length in the part number and the description just fine. If I insert this same structural piece in a skeleton using the frame generator, then the length that shows up in the description is the default one that the part was originally created to. How do I get the length to show up in the frame BOM correctly when parts are created using the frame generator?
This works using the structural members out of the box.
How to edit the member name in an iassembly table using code? The Part Number and Description iproperties are easy to handle. But I am stuck on how to access the member name and edit it. I guessed at some methods, but keep getting errors.
View 4 Replies View RelatedI am looking to generate ipart members for each ipart as I activate it?
View 2 Replies View RelatedI'm using 2012 Professional and I would like to know if there is a way to insert a structural member into a part file instead of having to use Frame Generator to get structural shapes from the content center withough having to manuall draw the section view of the member..
View 5 Replies View RelatedI have this error in my iLogic code for inserting sketch symbols. "Public Member 'ActiveSheet' on type 'Drawing View' not found"
I have declared everything in the code. I dont understand what it cant find.
I created a template part, turned it into an I-part and published it successfully as a Frame Member.
The custom member was published into a custom library that is read/write. I was forced to create this library in order to publish the part.
When I go to use the custom profile with the frame generator, I am able to find the custom member in the dialog but when the frame generator tries to generate the part, I get this error message:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for Unnamed GIRT-2 could not be located in the Content Center library.
During some discussion with other uses of Inventor I was ask if I knew about a problem relating to Changing a member size in Frame Generator and the iProperties maintain the old members properties.
The basic problem is as follows:-You start with a simple frame, create all of the members save and then added to a drawing. The members frame come from the content centre which have been copied into a Custom Library to enable addition parameters to be added along with addition iproperties being automated such as DESCRIPTION.
Once the frame and associated members have been created and then save, if a user wants to change the size of the member inventor has to create a new part file and then inserts into the frame generator frame. However, I have found that if you review the iProperties of the new file the DESCRIPTION is the same as the one that was replace, however it was strange to see that the STOCKNUMBER and PART NUMBER was updated correctly. It seems to be only a problem with the DESCRIPTION property.
I need to add a new member to the ANSI Rectangular tube family in the content center. The problem is I don't know what the Ix and Iy columns are. Both columns have a sub title of [inch^4]. What these variables represent? I inserted a part from the family in an assembly and checked the paramerers window and these aren't listed in the parameters.
View 2 Replies View Related`How can I extend the red "peg" in the attached model, by 8 mm either side? (I created it as a sweep)
View 3 Replies View RelatedI create a drawing of an iPart, while doing so I have the iPart model open in the background. When placing a view on the drawing the active factory member is the default option, I have a bad memory so forget to tell Inventor that actually I would like to use a specific iPart member in this particular drawing view. I then spend a long time laying out and dimensioning the drawing. When complete, I create a second sheet and copy all information from sheet 1 onto sheet 2. I then double click on the main drawing view and change the model state to an alternative factory member. At this point I realise that the drawing on sheet one is based on the active factory member and start swearing.
The result of changing to a different member when the existing drawing is based on the active member is that ALL DIMENSIONS DISSAPEAR FROM THE DRAWING AND HAVE TO BE PAINSTAKINGLY REPLACED. At this point I will usually REDRAW SHEET 1 so that further sheets can be created quickly in the future by selecting an alternative factory member.
can I change the software defaults somewhere in the setup to prevent the 'active factory member' being displayed as an option in the first place?
When I insert a threaded part from the Content Center I get this message "unable to successfully update the member part file, problem occurred when setting thread data" The fastener will insert but the threads are very small.
View 7 Replies View RelatedI need to Trim or Extend Sketches. Is there any API to access the Trim/Extend Tool?
View 1 Replies View RelatedI use INV 2013 (Premium product and not ultimate). I am not used to creating complex surfaces. I have come across a situation, where I need extend the edge of the part as shown. (Like a press tool form die and form punch surface. In other words, 3d part edge is the parting line of mould and extend around for the die surface.
View 9 Replies View RelatedHow i can create with vba a surface Extend
Take a look picture?
Is it possible to extend the curved face of the solid, straight up to the new not curved face. It need to be a solid .
View 3 Replies View Related