Attempting for the first time camera animation, but the rendered movie appears to be faded, washed out, loss of color- not sure the proper term here. Â Attached image shows original, with window in upper left showing washed out color in movie animation rendering.
Using:
Inventor 2012
Windows 7 64 bit
3.07 Ghz Xeon processor
6 Gig
NVIDIA Quadro 2000
For some reason when using the path option in inventor studio for camera animation the camera rolls for no reason?? I have created two helical curve sketches around my product, the outer curve is the path for the camera and the inner curve is the path for the target. Both curves are the same height and have 1 revolution. When i play the camera it works out fine untill it hits 1/4 of the way through and suddenly flips 180 degrees so now the camera is upside down, once it hits 3/4 of the way it flips back again to the correct rotation. If i dont create an inner curve for the target and place the target directly in the centre of my product with no path to follow the camera spins all over the place when it follows the curve.
View 9 Replies View RelatedHey, I made something in photoshop cs but everytime I save it ((No matter what format)) it comes out a total washed out color.
This is the color it is supposed to be.
I'm experiencing a very different picture when i upload here, the colors are very washed out and they are grainier a bit.
View 4 Replies View RelatedI'm running photoshop CS3 in a macbook pro under windows xp, and I want to add color to something in my picture. I used "selective color" (Layer > adjustments > selective color) to add color to a whitish-looking robe that is worn by a character that I created in photoshop earlier, but even when I move the slider to +100 % the color is still too washed out (will add images later). I know from experience using Photoshop CS 3 in my old laptop (a HP Compaq Presario X6000 running windows XP)Â that to get the depth of color I want in my character's robe, I shouldn't have to move the slider all the way to +100 %. Is there any way to fix this so I can get the same color depth I got when I used my old laptop? P.S. When I choose "selective color" a dialogue box comes up. I left the settings in this dialogue box as they are seen in the image, and clicked "ok".
View 2 Replies View RelatedI have the full CS Suite 3 and my issue is with the Photoshop aspect. It has worked for me beautifully for many years and, unfortunately, has come into a problem recently. When I select a color using the eyedropper tool (sample size 3 by 3 Average) it selects the color. Then, upon attempting to paint that color, it uses a color that is washed out by comparison. It selects the right color but the paint brush (I'm using the standard, 27 pixel soft brush, normal mode, 100% opacity, 100% flow) will not paint that color. It looks like it's adding more white to it or adding a muddled grey color. I'm not amused with this at all.
Â
I'm not certain whether it is my having accidentially hit something as to make this happen or if it is the program glitching. I uninstalled and reinstalled and, unfortunately, am still finding the problem. I will try uninstalling and reinstalling again (this time deleting all the preferences) to see if that may fix it. It does this with multiple images (all .psd files, multiple layers) so I know that it's not the single file being corrupt.
I have recently discovered what I think could possibly be a bug when using the OpenEXR format with Mental Ray passes and color management in Maya 2011 & 2012.
For example If I create a scene using the below steps:
1. Enable Color Management (default linear work-flow)
1. Create a sphere and assign a Maya material or a mia_material_x_passes shader to it (textured)
2. Add the sphere and light to the masterLayer or any custom layer.
4. Create a beauty pass, and associate with layer
3. Change the output image format to OpenEXR
4. Render and the color looks correct once a gamma correction of 2.2 is applied. See image attached goodColorSpace.jpg
However, If I add a (CGpost) pass to the same layer; for example a cameraDepth or Object Normal. The color space for the beauty and even the masterlayer passes are all washed out. See image attached badColorSpace.jpg
It seems that when using Color Management and combining (illumination) and (CGpost) Pass Groups in a single layer with OpenEXR is creating this outcome.
I should add that changing the frame buffer dose not work either, same result with 8bit Int --> 32bit Float.
I have attached 2 images which show that by simply combining a CPost (cameraDepth) pass with an Illumination (beauty) pass creates a very different looking color space.
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
I was wondering if there was a way to make the Target Camera not flip to the opposite side; especially in such an abrupt way.My camera target is linked to a moving ball, the camera is not moving. So when the ball moves far enough, the camera will make a flip.Is there a way to control this camera behaviour or stop it all together?
View 4 Replies View RelatedI am trying to move my camera from an angle shot, to a side field with no FOV. I can't use 0 FOV because iray won't render it properly. So I animation the FOV from 45 to 2. The problem is that I have to move the camera so far away from the object to make the shot fill the camera with an FOV of 2. My camera appears to move way out and then zoom in again on the object. It's not actually doing this, but the combination of the FOV animation and the distance the camera moves is making it appear to move far away, then zoom in again. Is there some trick for animation FOV?
my specs are this quad processors, 8 Gb RAM, windows xp64bit, 3ds max 2011
I made one scene in 3dsmax 2013 in 24fps.Is just a move and rotation camera animation.In another software(after effects) I made interpretfootage as 24fps, and the composite 24fps.
The final move apear like droping, jumping frames, a not cool sensation,May be just montion blur, but realy, apear like 3dsmax animation interpolating as 30fps.but in begin i already set the scene to 24fps.
I have two different files that contain data at greatly different scales. I'd like to render out each sequence and composite seamlessly. Is there any easy way to match the movement of two cameras in files that contain data of vastly different scales? I'd rather not merge data. I'd like to animate the camera in one file, merge the camera into the other file and scale the movement up.
View 6 Replies View RelatedI am tracking points on a moving object, it doesn’t deform, it tracks nice. Using Matchmover. Back in Max, it sees it as a static object, and the camera is moving around it.
Any way to invert the animation between a camera and an object so the other one is the one that moves, but they retain the same relational animation? Did that make sense? Right now the object (represented by a Group of 3D tracked points) is still but the camera moves, I want this opposite, the camera is still but the tracked points move, and it looks the same through the camera.
Is it possible to draw a spine Max uses as a rail for a camera?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
- 2x Xeon 2670V2 - 64GB - W7000 -
When I merge an animated camera from another scene, the movement setting keys for the camera and target are there, but it appears that animated exposure settings are not. Is there a way to import those with the camera, as well?
View 9 Replies View RelatedI am trying to move a free camera along a path... but the 'target' not moving with it.
Is that correct even tho it does not have a 'target'?
To get camera & target to move together, do I need to move them both individually?
3ds Max Design 2012
I've tried deleting all preferences. I was working with the camera originally then suddenly the keyframes wouldn't appear as red lines (there was only 1 camera) and appeared blank, i deleted these 'blank' keyframes and ever since I've been unable to play the entire camera sequence, the timeline simply sits at 0. I've tried a new camera with it's own keyframing but to no avail, it refuses to play.
edit: I just tried in a new scene also, same problem. It's making it near impossible to preview animations in real-time.
I have problem with animating camera along a spline using path constraint. The spline has been spline normalized before added to the path constraint. Then I add besier floating to be able to slow down the camera.
The final camera seems to move not smoothly. This can notice especially when the camera are further away from the origin (0,0).
Some says it's because of Max's coordinates is not fine enough which can clearly proved when import autocad file which located very far from the origin into max and most vertex will be shifted from where it should be in Autocad.
I'm new to Maya 2011 and simply put, I need to know the basics of animating a camera around a scene, along a path, slowing down and speeding up, how to move the point of interest, that type of thing.
View 1 Replies View Relateda few things involving cameras. My assignment was to use our plane that we modeled with poly's and animate it on a motion path(used cv curve tool) and have a camera above it follow it. Now I got that down perfect.
But what I don't have a clue on, is how do I attach a camera on the same motion path as the plane and have a camera angle right behind the spinning propeller? Like a cockpit view.
When I plot to PDF using DWG to PDF.pc3 the drawing appears to be washed out, some things are darker than others. I am using Autocad 2011 and Adobe Acrobat 9 and 10.
I do not have this problem when I print from Autocad 2009 .
As I am working on a project this evening, at home, and only Autocad 2011 here, and Adobe Acrobat 10.
My plot setting are identical in 2011 as they are in 2009.
Why do my images look washed out after I have worked in Photoshop CS6 and saved them in Finder? I have been a Photoshop user for a while now and have never experienced this problem. It started 2 months ago and no one can seem to tell me why or how to fix it. I am a professional photographer and I have clients waiting on their images but I can't send them looking as horrible as they do. My workflow is: drag and drop an image from iPhoto or Finder to Photoshop. I change things like levels, contrast, image size and use the healing too.
Then I save to Finder so I can upload to dropbox or to website or burn to a DVD. Now when I save the image the thumbnail looks washed out, without color and looks horrible!!! I don't know if my photo files are corrupted or ? If I open the image in Photoshop or Bridge it looks fine. Things were working just fine, but not now.
I do a lot of digital art in PS. I noticed that when I convert my PSDs to JPGs, my colors get washed out (they get darker if the image is generally dark). I know that I lose quality during compression, but I've seen lots of JPGs that don't seem to suffer it as drastically. Is there some sort of setup that I can do before hand to make sure the colors in my PSD match that of my JPG more closely in the final result?
View 1 Replies View RelatedMy jpg thumbnails and previews look washed out in the folders of Windows explorer, but are correct and vivid when I open them in Photoshop. This only happens with files I edit, and has started since updating to the Creative Cloud CS6. How can I get the thumbnails to match - I am concerned about client impressions when seeing them on their systems. I have checked all of the export and color settings I can think of, but can't seem to get them accurate.
View 11 Replies View RelatedMy RAW files look washed out, in camera I introduced warm colours by setting it on cloudy and set to vivid. They look great in other programs, how do I retain the original colors?
View 17 Replies View RelatedI'm new to photography but taking every chance I can to learn and slowly upgrade my tools. I recently switched from a PC(CS3) to Macbook Pro(CS6). Since doing so, I am having a huge problem. My photos show up exactly as I want them to on my Mac, in and out of Photoshop, but look washed out almost everywhere else, including the web, on PC's and in print(Shutterfly). There are a few exceptions like facebook, but still not all of the photos show up the same quality as what I saw on my Mac.
Â
I thought I did a good job of calibrating my Mac and I'm not doing anything different in PS, but I'm completely lost on what could be causing this.I can upload one of my jpg's so you can see what I'm seeing off my Mac if needed.
I've been using CS2 all morning, dragging and dropping images from Canon's Zoombrowser and doing minor editing. All of a sudden half an hour ago, images' colors became incorrect, much brighter and more washed out than they should be. I figure I must have hit a hotkey that changed something. I've checked through all settings I know of, and must be missing the correct one. Images are displayed correctly in other programs, including Imageready, and images that appear incorrect in PS that are resaved within PS also display correctly in other programs.
View 5 Replies View RelatedAny t-shirt designers in the house? I'm trying to design a couple of graphics for t-shirts in Photoshop and want to give the artwork that old, vintage, washed look. Can someone share some of these tricks with me.
View 1 Replies View RelatedAnybody know why a web design created in Photoshop in the sRGB workspace would appear washed out when viewed in a web browser? I have designed a new web site in Adobe CS4 Mac using the sRGB (IEC61966-2.1) workspace. When I save the images for the web, the colors look slightly, but consistently, washed out when I view them in my browser.
Even the background color appears washed out (which was reproduced in CSS using the #959fba hex value provided by Photoshop). The best information I could find on this subject via Google was the following article... [Hm, forum says I'm too new of a member to be allowed to post a link, but the article is titled "Tips for Managing Web Color in Photoshop" at CreativePro.com]
...But I'm doing everything they recommend in that article, and yet #959fba still looks deeper and richer in Photoshop CS4 than it does in Firefox 3.0.6.
Gamma 2.2, Gamma 1.8. Linear workflow, exposure, input - output etc. how NOT to get washed out images using sun&sky. For example, you use daylight system to render a car with carpaint, the carpaint mat is washed out. No matter what settings are used. Some renders look as if each A&D material stayed nicely saturated and crisp while most don't. I know that the daylight system is supposed to mimic real lighting conditions, but there has to be a way to preserve a nice rich crisp A&D color on renders.
View 9 Replies View RelatedI recently started working with the new adobe cc programs. I haven't encountered these problems before. I have created everything using CMYK and used no images. I checked the colors in InDesign CC and the colors looked washed out as well. I checked overprint view and the colors don't change in Illustrator.
Â
The left is a screenshot of Illustrator and the right is a screenshot of PDF.
 Â
Adobe CC uses synced color profiles so the colors should be the same across all adobe products right?